Wichtige Sicherheitsinformationen
Please read all instructions carefully before using the Xiaomi Mi Induction Cooker ZHF4045GL. Retain this manual for future reference. Failure to follow these safety guidelines may result in electric shock, fire, or personal injury.
- Das Gerät, das Netzkabel und der Stecker dürfen nicht in Wasser oder andere Flüssigkeiten getaucht werden.
- Use the induction cooker on a stable, flat, heat-resistant, and non-metallic surface.
- Bewahren Sie das Gerät außerhalb der Reichweite von Kindern und Personen mit eingeschränkten körperlichen, sensorischen oder geistigen Fähigkeiten auf.
- Heiße Oberflächen nicht berühren. Beim Umgang mit heißem Kochgeschirr immer Ofenhandschuhe oder Topflappen verwenden.
- Only use induction-compatible cookware. Non-compatible cookware will not heat.
- Ensure adequate ventilation around the unit during operation. Do not block air vents.
- Ziehen Sie den Stecker aus der Steckdose, wenn Sie das Gerät nicht verwenden und bevor Sie es reinigen.
- Regularly inspect the power cord for any damage. Do not operate the appliance if the cord or plug is damaged.
- Dieses Gerät ist nur für den Hausgebrauch bestimmt. Nicht im Freien oder für gewerbliche Zwecke verwenden.
- Do not place metallic objects such as knives, forks, spoons, lids, cans, or aluminum foil on the induction plate, as they can become hot.
Produkt überview
The Xiaomi Mi Induction Cooker ZHF4045GL is a portable and efficient cooking appliance designed for precise temperature control and versatile cooking. It features a minimalist design, an intuitive control knob, and an external temperature probe for enhanced accuracy.

The Xiaomi Mi Induction Cooker ZHF4045GL on a kitchen countertop, showcasing sein minimalistisches Design und seine kompakte Form.

Von oben nach unten view of the Xiaomi Mi Induction Cooker ZHF4045GL control panel, showing the timer, menu buttons, and central control knob with digital display.
Setup und Installation
Follow these steps to set up your induction cooker:
- Auspacken: Carefully remove the induction cooker and all accessories from the packaging. Retain packaging for future transport or storage.
- Platzierung: Place the induction cooker on a stable, level, and heat-resistant surface. Ensure there is at least 10-15 cm of clear space around all sides for proper ventilation. Do not place it near heat sources or on metallic surfaces.
- Stromanschluss: Connect the power cord to the induction cooker, then plug it into a suitable 220V electrical outlet. Ensure the outlet is compatible with the cooker's plug type (an adapter may be required for certain regions, e.g., Schuko to UK).
- Erstreinigung: Vor dem ersten Gebrauch die Kochfläche mit einem weichen, feuchten Tuch abwischen.amp Tuch.

The Xiaomi Mi Induction Cooker ZHF4045GL positioned on a kitchen countertop with a pot, ready for use.
Bedienungsanleitung
Grundlegende Bedienung
- Ein-/Ausschalten: Press the central control knob to turn the cooker on or off. The LCD display will illuminate.
- Leistungs-/Temperatureinstellung: Rotate the central control knob clockwise to increase power/temperature and counter-clockwise to decrease it. The current setting will be shown on the LCD display.
- Timer-Funktion: Press the 'Timer' button to set a cooking duration. Use the control knob to adjust the time, then press the knob again to confirm.
- Menüauswahl: Press the 'Menu' button to cycle through various pre-set cooking modes or functions.
Erweiterte Funktionen
- Externer Temperaturfühler: The cooker includes an external metal temperature probe. Insert this probe into the bottom of your pot to accurately measure and maintain the temperature of your food. This is particularly useful for precise cooking methods.
- Niedrigtemperaturgaren: Benefit from the sensitive temperature probe and dual-frequency heating technology, which allows the cooker to maintain a stable low temperature for extended periods, ideal for sous-vide or slow cooking.
- Stable Heating: The dual-frequency heating technology ensures consistent heat delivery, preventing the intermittent heating issues common with traditional induction cookers, providing a cooking experience similar to a traditional stove.
- Kochmodi: Access over 100 cooking modes through the associated mobile application, allowing for a wide range of culinary preparations.

The Xiaomi Mi Induction Cooker ZHF4045GL in use, with a pot of boiling water, demonstrating its efficient heating capability.

Eine Nahaufnahme view of the cooking surface of the Xiaomi Mi Induction Cooker ZHF4045GL, highlighting the integrated temperature probe for precise temperature measurement.
Reinigung und Wartung
Proper cleaning and maintenance will extend the lifespan of your induction cooker:
- Vor der Reinigung: Always unplug the induction cooker from the power outlet and allow it to cool completely before cleaning.
- Kochfläche: Wipe the ceramic cooking surface with a soft, damp cloth. For stubborn stains, use a mild detergent specifically designed for ceramic or glass cooktops. Avoid abrasive cleaners, scouring pads, or harsh chemicals, as they can scratch or damage the surface.
- Bedienfeld: Wischen Sie das Bedienfeld mit einem weichen, damp cloth. Do not allow water to enter the control area.
- Temperaturfühler: Clean the external temperature probe with a damp Tuch nach jedem Gebrauch.
- Silicone Ring: The anti-slip silicone ring on the panel can be easily disassembled for more convenient cleaning. Ensure it is properly re-seated before next use.
- Sockel und Lüftungsschlitze: Periodically wipe the base and ensure the ventilation openings are free from dust and debris. Do not spray water directly into the vents.
- Lagerung: Store the cooker in a dry place when not in use.
Fehlerbehebung
If you encounter issues with your induction cooker, refer to the following table for common problems and solutions:
| Problem | Mögliche Ursache | Lösung |
|---|---|---|
| Der Herd lässt sich nicht einschalten. | No power supply; Power cord not properly connected; Appliance malfunction. | Check if the power plug is securely inserted into the outlet. Ensure the outlet has power. Check the power cord for damage. |
| Cookware not heating | Cookware is not induction-compatible; Cookware is not centered on the cooking zone; Cookware is too small or too large. | Use only induction-compatible cookware (magnetic bottom). Center the cookware on the cooking zone. Ensure cookware diameter is within recommended range. |
| Das Display zeigt einen Fehlercode an. | Internal fault; Overheating; Sensor issue. | Turn off the cooker, unplug it, and wait for 10-15 minutes before plugging it back in. If the error persists, consult the full user manual or contact customer support. |
| Ungleichmäßige Erwärmung | Cookware base is not flat; Cookware is not suitable for induction. | Use cookware with a flat, thick base. Ensure the cookware is induction-compatible and of good quality. |
| Lautes Lüftergeräusch | Normal operation; Blocked ventilation. | The cooling fan operates during and after cooking. This is normal. Ensure ventilation openings are not blocked. |
Technische Daten
Technical specifications for the Xiaomi Mi Induction Cooker ZHF4045GL:
| Besonderheit | Spezifikation |
|---|---|
| Marke | XIAOMI |
| Modellnummer | ZHF4045GL |
| Farbe | Weiß |
| Material | Keramik |
| Wastage | 2100 Watt |
| Bandtage | 220 Volt |
| Produktabmessungen (T x B x H) | 26.5T x 28B x 7H Zentimeter |
| Artikelgewicht | 2.1 Kilogramm |
| Art der Steuerung | Berührungssensor, Drehknopf |
| Heizelemente | 1 |
| Besondere Merkmale | Induction, LCD Display, External Temperature Probe |
| Im Lieferumfang enthaltene Komponenten | Netzkabel, Bedienungsanleitung |

Diagram illustrating the dimensions of the Xiaomi Mi Induction Cooker ZHF4045GL: 28cm width, 26.5cm depth, and 7cm height.
Garantie und Support
For detailed warranty terms and conditions, please refer to the warranty card included with your Xiaomi Mi Induction Cooker ZHF4045GL. The warranty period and coverage may vary by region and retailer.
For technical support, service inquiries, or to report any issues with your product, please contact Xiaomi customer service through their official webWebsite oder die in Ihrer Produktdokumentation angegebenen Kontaktinformationen.





