1. Einleitung
Thank you for choosing the XTUGA EW240 UHF 4-Channel Wireless Microphone System. This professional wireless microphone system is designed to deliver clear and powerful audio performance for various applications, including family parties, stages, churches, and karaoke. This manual provides detailed instructions for setup, operation, maintenance, and troubleshooting to ensure optimal performance and longevity of your system.
2. Wichtige Sicherheitshinweise
- Lesen Sie alle Anweisungen sorgfältig durch, bevor Sie das Produkt verwenden.
- Bewahren Sie dieses Handbuch zum späteren Nachschlagen auf.
- Um Brände oder Stromschläge zu vermeiden, setzen Sie das Gerät weder Regen noch Feuchtigkeit aus.
- Sorgen Sie für ausreichende Belüftung und blockieren Sie keine Lüftungsöffnungen.
- Verwenden Sie nur das mit dem Gerät mitgelieferte Netzteil.
- Versuchen Sie nicht, das Gerät zu zerlegen oder zu verändern. Überlassen Sie alle Wartungsarbeiten qualifiziertem Fachpersonal.
- Entsorgen Sie Batterien gemäß den örtlichen Vorschriften.
3. Packungsinhalt
Bitte überprüfen Sie das Paket, um sicherzustellen, dass alle Artikel vorhanden sind:
- 1 x 4-Channel Receiver
- 1 x Benutzerhandbuch
- 4 x Bodypack-Sender
- 4 x Lavalier-Mikrofone
- 4 x Headset-Mikrofone
- 1 x 110 V/220 V Netzteil
4. Produktüberschreitungview
4.1 Empfängereinheit
The receiver is the central unit of the wireless microphone system, featuring a durable metal design and individual volume controls for each of its four channels. It includes four receiving antennas for stable signal reception and an LCD display for monitoring operating status.
4.2 Bodypack-Sender
The system includes four bodypack transmitters, each designed for use with either a lavalier or headset microphone. These transmitters are compact, feature an LCD display for battery and operating status, and are powered by two 1.5V batteries, offering up to 8 hours of continuous use.
5. Einrichtungsanweisungen
5.1 Empfänger-Setup
- Platzierung: Place the receiver on a stable, flat surface, away from potential sources of interference (e.g., computers, Wi-Fi routers). Ensure adequate ventilation around the unit.
- Antennenanschluss: Screw the four included antennas onto the ANT A, ANT B, ANT C, and ANT D connectors on the rear panel of the receiver. Position them vertically for optimal signal reception.
- Stromanschluss: Connect the supplied power adapter to the DC 16V, 400mA input on the rear of the receiver, then plug it into a suitable power outlet.
- Audioausgang: Verbinden Sie den Receiver mit Ihrem Mixer, amplifier, or sound system using either the 6.3cm (1/4 inch) mixed output or the individual 6.3cm (1/4 inch) outputs for each channel (OUT A, OUT B, OUT C, OUT D).
5.2 Sendereinrichtung
- Einlegen der Batterie: Open the battery compartment of each bodypack transmitter. Insert two 1.5V AA batteries, ensuring correct polarity. Close the compartment securely.
- Mikrofonanschluss: Plug the lavalier or headset microphone into the input jack on the bodypack transmitter.
- Einschalten: Turn on the power switch on the bodypack transmitter. The LCD display will illuminate, showing the channel and battery status.
6. Bedienungsanleitung
- Einschalten des Systems: First, power on the receiver. Then, power on each bodypack transmitter.
- Lautstärkeregelung: Use the individual volume control knobs on the receiver for each channel (CH 01, CH 02, CH 03, CH 04) to adjust the microphone levels. Start with the volume low and gradually increase it to avoid feedback.
- Signalanzeigen: The receiver's LCD display will show the active channel frequencies. The RF (Radio Frequency) and AF (Audio Frequency) indicators will light up when a signal is being received and audio is present, respectively.
- Verwendung: Position the lavalier microphone approximately 6-8 inches from your mouth, or wear the headset microphone comfortably. Speak clearly into the microphone.
- Ausschalten: When finished, first turn off the bodypack transmitters, then power off the receiver. This helps prevent pops or thumps through your sound system.
7. Wartung
- Reinigung: Reinigen Sie Empfänger und Sender mit einem weichen, trockenen Tuch. Verwenden Sie keine flüssigen Reiniger oder Lösungsmittel.
- Batteriewechsel: Replace batteries in the bodypack transmitters when the low battery indicator appears on the LCD display. Always use fresh, high-quality 1.5V AA batteries.
- Lagerung: Store the system in a cool, dry place when not in use. Remove batteries from transmitters if storing for extended periods to prevent leakage.
- Antennenpflege: Handle antennas carefully. Avoid bending them excessively.
8. Fehlerbehebung
| Problem | Mögliche Ursache | Lösung |
|---|---|---|
| Kein Ton vom Mikrofon | Transmitter or receiver not powered on; low batteries; microphone not connected; receiver output not connected to sound system; volume too low. | Ensure all units are powered on. Replace batteries. Check microphone connection to transmitter. Verify receiver output is connected and sound system is on. Increase receiver and sound system volume. |
| Schlechte Tonqualität/Störungen | Interference from other wireless devices; transmitter too far from receiver; antennas not positioned correctly; low batteries. | Move away from other wireless devices. Ensure line of sight between transmitter and receiver. Position antennas vertically. Replace batteries. |
| Kurze Reichweite | Obstructions between transmitter and receiver; antennas not positioned correctly; environmental interference. | Ensure clear line of sight. Position antennas vertically. Avoid using in areas with high RF interference. |
| Receiver LCD not displaying | Receiver not powered on; power adapter faulty. | Check power connection and ensure receiver is switched on. Try a different power outlet. |
9. Spezifikationen
9.1 General System
- Anzahl der Kanäle: 4 Kanäle
- Stabilität: ± 0.006 %
- Normal Deviation: ± 22kHz
- S/N-Verhältnis: <120 dB
- THD: <0.6 %
- Frequenzgang: 50 Hz - 15 kHz
- Reichweite: 65 Meter
9.2 Empfänger
- Empfindlichkeit: > 80 dB
- Audioausgang: Balanced and Unbalanced (6.3cm mixed output, four 6.3cm individual outputs)
- Strombedarf: AC 16 V, 400 mA
- Abmessungen: 440 x 210 x 40 mm
- Gewicht: Ca. 1.3 kg
- Material: Metall
9.3 Wireless Microphone (Transmitter)
- Patronentyp: Dynamisch
- HF-Ausgang: <10 mW
- Normal Deviation: ± 22kHz
- Maximale Abweichung: ± 80kHz
- Batterie: 2 x 1.5 V AA-Batterien
- Akkulaufzeit: 8 Stunden
10. Garantie und Support
XTUGA products are designed for reliability and performance. For warranty information and technical support, please refer to the contact details provided with your purchase or visit the official XTUGA webBewahren Sie Ihren Kaufbeleg als Kaufnachweis für eventuelle Garantieansprüche auf.