Disney Frozen 2 Fly Wheels 10" Junior Cruiser Ride-On Instruction Manual

Einführung

This manual provides essential information for the safe assembly, operation, and maintenance of your Disney Frozen 2 Fly Wheels 10" Junior Cruiser Ride-On. Please read all instructions carefully before assembly and use. Adult supervision is required at all times.

Sicherheitshinweise

• Eine Aufsicht durch einen Erwachsenen ist erforderlich.
• Always ensure your child wears a helmet when operating the ride-on. (Helmet not included).
• This product contains small parts prior to assembly, posing a Erstickungsgefahr to children under 3 years of age. Keep unassembled parts away from young children.
• Recommended for toddlers aged 2-4 years.
• Maximum weight limit: 35 lbs.
• Stellen Sie vor jedem Gebrauch sicher, dass alle Teile sicher befestigt sind.
• Use on flat, level surfaces away from traffic, stairs, and steep inclines.

Packungsinhalt

Verify all components are present before beginning assembly. Refer to the included printed instruction sheet for a detailed parts list.

• Main body/chassis
• Front wheel with pedals
• Hinterräder (2)
• Lenker
• Achsstange
• Fasteners and caps
• Stickerbogen

Montageanleitung

Adult assembly is required. You will need a hammer and a screwdriver (not included) for assembly. Please follow the steps below carefully.

1. Einbau der Hinterräder

Insert the axle rod through the designated holes in the main body. Secure the rear wheels onto the axle rod, ensuring they are firmly in place. Use the provided caps and tap gently with a hammer if needed to secure.

2. Installation der Pedale

Attach the pedals to the front wheel assembly. Ensure they fit snugly and are securely fastened. Tap into place with a hammer if necessary.

3. Building the Chassis

Connect the front fork assembly (with the front wheel and pedals) to the main body of the ride-on. Align the components and secure them using the provided screws. Do not overtighten.

4. Attaching Handlebars

Place the handlebars onto the steering column. Secure them with the appropriate fasteners, ensuring they are stable and allow for smooth steering. Do not overtighten.

5. Anbringen von Aufklebern

Personalize your ride-on by applying the Frozen 2 character graphics stickers as desired. Ensure surfaces are clean and dry before application for best adhesion.

Bild: Seite view of the assembled Disney Frozen 2 Fly Wheels 10 inch Junior Cruiser Ride-On.

Bedienungsanleitung

The Disney Frozen 2 Fly Wheels Junior Cruiser is designed for young riders to enjoy. Its low center of gravity and easy-grip handlebars provide stability and control.

• Reiten: Children can propel the ride-on by pedaling with their feet or by pushing off the ground.
• Soundeffekte: Press the push button located on the handlebars to activate exhilarating sounds and tunes.

Wartung

• Überprüfen Sie regelmäßig alle Befestigungselemente und Verbindungen, um sicherzustellen, dass sie fest und sicher sitzen.
• Clean the ride-on with a damp Tuch und milde Seife. Vermeiden Sie aggressive Chemikalien.
• Store the ride-on in a dry place away from direct sunlight to prevent material degradation.

Fehlerbehebung

• Lose Teile: If any parts become loose, re-tighten them immediately.
• Soundeffekte funktionieren nicht: Prüfen Sie, ob die Batterien korrekt eingesetzt sind und ausreichend geladen sind. Tauschen Sie die Batterien gegebenenfalls aus.
• Difficulty steering/pedaling: Ensure all assembly steps were followed correctly and no parts are obstructed.

Technische Daten

• Produktabmessungen: 23.7 in L x 14.92 in B x 14.8 in H
• Artikelgewicht: 5.04 Pfund
• Artikelmodellnummer: 600251-2
• Vom Hersteller empfohlenes Alter: 24 Monate – 5 Jahre
• Gewichtsbeschränkung: 35 Pfund
• Vorderradgröße: 10 Zoll

Bild: Produktabmessungendiagramm.

Kundenservice

For missing or broken parts, or any other inquiries, please contact customer service.

• Schylling Customer Service: 800-541-2929