BANNER ENGINEERING S18AW3FF50
S18AW3FF50 EZ-Beam S18 Series Photoelectric Sensor User Manual
Model: S18AW3FF50 | Brand: BANNER ENGINEERING
1. Einleitung
This manual provides essential information for the installation, operation, and maintenance of the BANNER ENGINEERING S18AW3FF50 EZ-Beam S18 Series Photoelectric Sensor. This sensor is designed for reliable object detection in industrial environments, featuring a 50 mm range, 20-250VAC input, and SPST solid-state light operate output.
Figure 1: BANNER ENGINEERING S18AW3FF50 Photoelectric Sensor with coiled cable.
2. Einrichtung und Installation
Eine fachgerechte Installation ist für optimale Leistung und Sicherheit unerlässlich. Befolgen Sie diese Schritte sorgfältig.
2.1 Auspacken und Prüfen
- Carefully remove the sensor from its packaging.
- Inspect the sensor for any visible damage that may have occurred during shipping.
- Prüfen Sie, ob alle im Lieferschein aufgeführten Komponenten vorhanden sind.
2.2 Montage des Sensors
The S18AW3FF50 sensor is designed for easy mounting. Ensure the mounting surface is stable and free from excessive vibration.
- Select a mounting location that provides clear line-of-sight for the sensor's detection range (50 mm).
- Secure the sensor using appropriate mounting hardware (not included). The sensor features a threaded barrel for secure attachment.
- Ensure the sensor is oriented correctly for the intended detection application.
Abbildung 2: Seite view of the S18AW3FF50 sensor, showing the threaded barrel and cable.
2.3 Elektrische Anschlüsse
WARNUNG: Disconnect all power before making electrical connections to prevent electric shock or damage to the equipment.
The S18AW3FF50 operates on 20-250VAC input and provides an SPST Solid-State Light Operate output. The sensor comes with a 2M (6.5FT) cable.
| Kabelfarbe | Funktion |
|---|---|
| Braun | AC Line (L1) |
| Blau | AC Neutral (L2) |
| Schwarz | Output (SPST Light Operate) |
Connect the sensor wires to the control circuit according to the provided wiring diagram and local electrical codes. Ensure all connections are secure.
Figure 3: S18AW3FF50 sensor showing the cable with exposed wires for electrical connection.
3. Bedienung
Once installed and wired, the S18AW3FF50 sensor is ready for operation.
3.1 Einschalten
Apply power to the sensor (20-250VAC). The sensor will typically have an indicator LED (if present) to show power status and output state.
3.2 Detection Principle
The S18AW3FF50 is a photoelectric sensor operating in a fixed field mode. It emits a light beam and detects objects based on the reflection or interruption of this beam. The "Light Operate" output means the output will be active when light is received by the sensor (i.e., when an object is detected or not detected, depending on the specific fixed field configuration).
3.3 Reichweite und Leistung
The sensor has a specified detection range of 50 mm. Ensure that objects to be detected fall within this range for reliable operation. Environmental factors such as dust, moisture, and ambient light can affect performance.
4. Wartung
The S18AW3FF50 sensor is designed for low maintenance. Regular checks can ensure long-term reliable operation.
4.1 Reinigung
- Periodically clean the sensor lens and housing to remove dust, dirt, or debris that may accumulate and interfere with detection.
- Use a soft, lint-free cloth and a mild cleaning solution if necessary. Avoid abrasive cleaners or solvents.
4.2 Kabel- und Verbindungsprüfung
- Regularly inspect the sensor cable for any signs of wear, cuts, or damage.
- Check electrical connections to ensure they remain secure and free from corrosion.
5. Fehlerbehebung
This section provides solutions to common issues encountered with the S18AW3FF50 sensor.
| Problem | Mögliche Ursache | Lösung |
|---|---|---|
| Sensor schaltet sich nicht ein | No power supply; Incorrect wiring; Damaged sensor. | Verify power supply (20-250VAC); Check wiring against Table 1; Replace sensor if damaged. |
| Sensor erkennt keine Objekte | Object out of range (50 mm); Dirty lens; Misalignment; Ambient light interference. | Ensure object is within 50 mm range; Clean sensor lens; Realign sensor; Shield sensor from strong ambient light. |
| Intermittierende Erkennung | Vibration; Loose connections; Fluctuating power. | Secure sensor mounting; Check all electrical connections; Ensure stable power supply. |
6. Spezifikationen
Key technical specifications for the BANNER ENGINEERING S18AW3FF50 Photoelectric Sensor.
- Modell: S18AW3FF50
- Serie: EZ-Beam S18 Series
- Erfassungsbereich: 50 mm
- Eingangslautstärketage: 20-250 V Wechselspannung
- Ausgabetyp: SPST Solid-State Light Operate
- Kabellänge: 2 M (6.5 Fuß)
- Sensortyp: Photoelectric, Fixed Field
- Hersteller: BANNER ENGINEERING
- ASIN: B07RZTBRLS
- Datum der Erstveröffentlichung: 3. Dezember 2021
7. Garantie und Support
For warranty information and technical support, please contact BANNER ENGINEERING directly or refer to their official webWebsite.
Rückgaberecht: The product may be subject to a return policy of 30 days for refund/replacement, as per the seller's terms.
Hersteller: BANNER ENGINEERING
Weitere Unterstützung finden Sie unter BANNER ENGINEERING official webWebsite.
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.