Einführung
Thank you for choosing the BRIKSMAX LED Lighting Kit for your LEGO 10255 Assembly Square model. This kit is designed to illuminate your building blocks, bringing your creation to life with vibrant lighting. This manual provides essential information for safe installation, operation, and maintenance of your lighting kit.
Sicherheitshinweise
- Dieses Produkt enthält Kleinteile und ist wegen Erstickungsgefahr nicht für Kinder unter 3 Jahren geeignet.
- Handle LED lights and wires with care to prevent damage. Do not bend wires excessively.
- Ensure the power source is disconnected before performing any installation or maintenance.
- Use only the specified power sources (battery holder or USB power cable) provided with the kit.
- Avoid exposing the kit to water or extreme temperatures.
Packungsinhalt
Bitte überprüfen Sie, ob alle unten aufgeführten Komponenten in Ihrem Paket enthalten sind:
Bild: Überview of the BRIKSMAX LED Lighting Kit components, including various lights, cables, expansion boards, and power options.
| Komponente | Menge |
|---|---|
| Warm White Street Light | 2 |
| 15cm Connecting Cables | 6 |
| Blue Dot Lights | 1 |
| 6-port Expansion Boards | 1 |
| AA Battery Holder (Batteries not included) | 2 |
| Klebequadrate | 2 |
| 15cm Warm White Dot Lights | 7 |
| 5cm Connecting Cables | 1 |
| 30cm USB Power Cable | 2 |
| 8-port Expansion Boards | 2 |
| Multiple Function Boards | 1 |
| LEGO PLATE (Random Color) | 8 |
| 30cm Connecting Cables | 4 |
| 15cm Red Dot Lights | 2 |
| White Strip Lights | 8 |
| 30cm Warm White Dot Lights | 1 |
Setup und Installation
This lighting kit is designed for integration with your existing LEGO 10255 Assembly Square model (LEGO set not included). Follow the detailed step-by-step instructions provided in the physical manual included with your kit. Careful placement of lights and routing of wires are crucial for optimal appearance and functionality.
- Prepare Your LEGO Model: Ensure your LEGO 10255 Assembly Square model is fully assembled and accessible for light installation.
- Identify Light Placement: Refer to the instruction manual for specific locations to place dot lights and strip lights within the model.
- Komponenten verbinden: Use the connecting cables to link the lights to the expansion boards. Ensure connections are secure but not forced.
- Kabel verlegen: Carefully route wires between LEGO bricks to conceal them as much as possible, avoiding pinching or excessive tension.
- Stromanschluss: Connect the expansion boards to the multiple function board, then connect the power source (battery holder or USB cable).
Video: A demonstration of the BRIKSMAX LED Lighting Kit installed on the LEGO 10255 Assembly Square, showcasing the various illuminated sections and overall effect.
Bild: Vorderseite view of the LEGO 10255 Assembly Square model, brightly illuminated by the BRIKSMAX LED lighting kit, highlighting the main entrance and street lights.
Abbildung: Seite view of the LEGO 10255 Assembly Square, showing the illuminated bakery section with warm yellow lights and a street lamp.
Image: A different side view of the LEGO 10255 Assembly Square, featuring the illuminated cafe area and the central fountain with blue lighting.
Image: Close-up of the upper floors of the LEGO 10255 Assembly Square, showing interior lighting through the windows.
Image: Detail of the dentist office section within the LEGO 10255 Assembly Square, illuminated to show interior details.
Bedienungsanleitung
Once the lighting kit is fully installed, you can power it using one of the following methods:
- Batterieleistung: Insert AA batteries (not included) into the battery holder and connect it to the multiple function board.
- USB-Stromversorgung: Connect the provided USB power cable to the multiple function board and plug the other end into a compatible USB power source (e.g., power bank, USB wall adapter).
The lights will activate once power is supplied. There are no additional controls for this specific kit beyond connecting/disconnecting the power source.
Wartung
- Reinigung: Gently dust the lights and wires with a soft, dry cloth. Do not use liquid cleaners.
- Batteriewechsel: If using battery power, replace batteries when lights dim or cease to function. Ensure correct polarity when inserting new batteries.
- Kabelinspektion: Periodically check wires for any signs of wear or damage. If damage is found, discontinue use and contact customer support.
Fehlerbehebung
| Problem | Mögliche Ursache | Lösung |
|---|---|---|
| Das Licht geht nicht an. | Kein Strom, lose Verbindung, defektes Bauteil. | Check power source (batteries or USB). Ensure all connections are secure. Inspect wires for damage. |
| Einige Lichter leuchten schwach oder flackern. | Low battery power, loose connection, damaged light. | Replace batteries or try a different USB power source. Check connections. If a specific light is damaged, contact support. |
| Die Kabel sind sichtbar oder nicht ordentlich verlegt. | Fehlerhafte Verlegung während der Installation. | Carefully re-route wires, utilizing gaps between bricks or under plates as shown in the instruction manual. |
If you encounter persistent issues not resolved by the above steps, please contact BRIKSMAX customer support for assistance.
Technische Daten
- Modellnummer: 10255
- Lichtquellentyp: LED
- Energiequelle: Battery Powered (AA, not included), Corded Electric (USB)
- Material: Plastik
- Farbe: Warm White (main lighting)
- Artikelgewicht: 0.37 Kilogramm
Garantie und Support
BRIKSMAX provides a 1 Jahr Garantie against manufacturer defects for this product. If you have any difficulties with your product, require technical assistance, or need to claim warranty service, please do not hesitate to contact us via email. Our customer support team is always available to provide assistance.
For further support, visit the official BRIKSMAX store on Amazon: BRIKSMAX Store