Edge-Core Networks AS7326-56X Switch User Manual

1. Einleitung

This manual provides comprehensive instructions for the installation, operation, maintenance, and troubleshooting of the Edge-Core Networks AS7326-56X switch. The AS7326-56X is a high-performance network switch designed for data center and enterprise environments, featuring 48 x 25 Gigabit Ethernet SFP28 ports and 8 x 100 Gigabit Ethernet QSFP+ uplink ports. It supports the Open Network Install Environment (ONIE) for flexible operating system deployment.

2. Sicherheitshinweise

Beachten Sie die folgenden Sicherheitsvorkehrungen, um Verletzungen und Schäden am Gerät zu vermeiden:

• Ensure proper grounding of the device before connecting power.
• Use only the power cord supplied with the unit or a certified equivalent.
• Der Schalter darf nicht in Umgebungen mit übermäßiger Feuchtigkeit oder extremen Temperaturen betätigt werden.
• Vermeiden Sie es, die Lüftungsöffnungen zu blockieren, um eine Überhitzung zu vermeiden.
• Disconnect all power before performing any maintenance or installation procedures.
• Die Installation und Wartung dieser Geräte sollte ausschließlich von qualifiziertem Fachpersonal durchgeführt werden.

3. Packungsinhalt

Überprüfen Sie, ob alle Artikel im Paket vorhanden sind:

• Edge-Core Networks AS7326-56X Switch Unit
• AC Power Cord(s)
• Rack Mounting Kit (brackets, screws)
• Konsolenkabel (RJ-45 auf DB-9)
• Dokumentation (Schnellstartanleitung, Sicherheitshinweise)

4. Physikalische Beschreibung

The AS7326-56X switch features a standard 1U rack-mountable form factor. The rear panel provides access to power inputs, fan modules, and network ports.

Abbildung 1: Hinteren view of the Edge-Core Networks AS7326-56X switch. This image displays the back panel of the switch, featuring two power supply units on the left and right sides, each with an orange handle. In the center, there are multiple fan modules, also with orange handles, arranged horizontally. Between the power supplies and fan modules, and to the right of the fan modules, are the various network port interfaces, including 48 x 25G SFP28 ports and 8 x 100G QSFP+ uplink ports, designed for high-speed network connectivity.

4.1. Vorderseite

The front panel typically includes status LEDs for power, system, and individual port activity. Specific LED indicators and their meanings are detailed in the LED Status section.

4.2. Rückseite

The rear panel (as shown in Figure 1) houses the following components:

• Power Supply Units (PSUs): Redundant, hot-swappable AC power supply modules.
• Lüftermodule: Hot-swappable fan modules for cooling.
• 48 x 25G SFP28 Ports: For high-speed server and access layer connectivity.
• 8 x 100G QSFP+ Uplink Ports: For high-bandwidth uplinks to core network devices.
• Konsolenport: RJ-45-Seriellanschluss für lokalen Managementzugriff.
• Management-Port: RJ-45 Ethernet port for out-of-band management.
• USB-Anschluss: Für Software-Upgrades oder die Sicherung/Wiederherstellung von Konfigurationen.

5. Einrichtung

5.1. Rackmontage

1. Befestigen Sie die mitgelieferten Rack-Montagehalterungen mithilfe der beiliegenden Schrauben an den Seiten des Switches.
2. Secure the switch into a standard 19-inch equipment rack using appropriate rack screws. Ensure adequate space for airflow around the unit.

5.2. Stromanschluss

1. Connect the AC power cord(s) to the power input receptacles on the rear panel of the switch.
2. Plug the other end of the power cord(s) into a grounded AC power outlet.
3. The switch will power on automatically once connected to power.

5.3. Netzwerkverbindungen

• SFP28-Ports: Insert compatible 25G SFP28 transceivers into the 48 SFP28 ports and connect fiber optic cables to your network devices.
• QSFP+-Anschlüsse: Insert compatible 100G QSFP+ transceivers into the 8 QSFP+ ports and connect fiber optic cables for uplink connections.

5.4. Zugriff auf die Erstkonfiguration

1. Connect a computer to the console port using the provided RJ-45 to DB-9 console cable.
2. Konfigurieren Sie Ihre Terminalemulationssoftware (z. B. PuTTY, Tera Term) mit den folgenden Einstellungen: 115200 Baud, 8 Datenbits, keine Parität, 1 Stoppbit, keine Flusssteuerung.
3. Power on the switch. The boot process will display on the console.
4. Alternatively, connect an Ethernet cable from your management workstation to the dedicated management port and configure an IP address within the same subnet as the switch's default management IP (if applicable).

6. Bedienungsanleitung

6.1. Power On and Boot Sequence

Upon connecting power, the switch will initiate its boot sequence. Observe the system LEDs for status indications. The ONIE (Open Network Install Environment) will load, allowing for the installation of a network operating system (NOS).

6.2. LED-Statusanzeigen

Refer to the following table for common LED indicators:

6.3. ONIE and Network Operating System (NOS)

The AS7326-56X ships with ONIE pre-installed. ONIE is a small operating system that provides an environment for installing other network operating systems. To install a NOS:

1. Access the ONIE prompt via the console port.
2. Follow the specific instructions provided by your chosen NOS vendor for installation via ONIE (e.g., using HTTP, FTP, or local USB).
3. Once the NOS is installed, the switch will reboot into the new operating system.

7. Wartung

7.1. Reinigung

Periodically clean the exterior of the switch with a soft, dry cloth. Ensure ventilation openings are free from dust and debris. Do not use liquid or aerosol cleaners directly on the unit.

7.2. Firmware- und Software-Updates

Regularly check the Edge-Core Networks support website or your NOS vendor's website for the latest firmware and software updates. Follow the provided instructions for updating to ensure optimal performance and security.

7.3. Fan and Power Supply Replacement

The fan modules and power supply units are hot-swappable. To replace a module:

1. Grasp the handle of the module to be replaced.
2. Gently pull the module straight out of its bay.
3. Insert the new module into the empty bay, ensuring it is fully seated.

8. Fehlerbehebung

8.1. Kein Strom

• Verify that the power cord(s) are securely connected to both the switch and the power outlet.
• Stellen Sie sicher, dass die Steckdose funktioniert, indem Sie sie mit einem anderen Gerät testen.
• Check the power supply unit LEDs. If off, the PSU may be faulty or not receiving power.

8.2. Keine Verbindung am Port

• Check the cable connection between the switch port and the connected device.
• Ensure the correct transceiver type (SFP28/QSFP+) is used and properly seated.
• Verify that the connected device is powered on and its port is active.
• Check the port configuration on both the switch and the connected device (speed, duplex, VLANs).

8.3. Console Access Issues

• Prüfen Sie, ob das Konsolenkabel korrekt angeschlossen ist.
• Verify the terminal emulation software settings (115200 baud, 8 data bits, no parity, 1 stop bit, no flow control).
• Try a different console cable or USB-to-serial adapter.

9. Spezifikationen

10. Garantieinformationen

The Edge-Core Networks AS7326-56X switch comes with a 3 Jahr Garantie from the date of purchase. This warranty covers defects in materials and workmanship under normal use. For detailed warranty terms and conditions, please refer to the official Edge-Core Networks warranty policy available on their webWebsite oder wenden Sie sich an deren Supportteam.

11. Technischer Support

For technical assistance, product inquiries, or to report issues, please contact Edge-Core Networks technical support. Before contacting support, ensure you have the product model number (AS7326-56X) and serial number readily available.

Visit the official Edge-Core Networks webWebsite mit Supportressourcen, FAQs und Kontaktinformationen: www.edge-core.com