1. Produktüberschreitungview
The Robertshaw IMV708 W10408179 Refrigerator Water Valve is a replacement component designed to regulate the flow of water to your refrigerator's ice maker and water dispenser. This valve ensures a consistent and controlled water supply for both functions.

Image: Robertshaw IMV708 W10408179 Refrigerator Water Valve, showing its inlet and outlet connections.
Kompatibilität
This water valve is compatible with various refrigerator brands, including but not limited to: Whirlpool, KitchenAid, Kenmore, Maitag, Amana, Roper, Crosley, IKEA, Und Inglis.
It serves as a direct replacement for the following part numbers: 1938614, 2186486, 2188622, 2188708, 2188746, 2205762, 2255457, 2304757, 2304833, 2315534, 4389177, AP5263471, W10408179, W10408179VP, PS3497634.
Elektrische Wertung
Dual Electrical Rating: 120V AC, 50/60 Hz, 35W | 120V AC, 50/60 Hz, 20W.
2. Sicherheitshinweise
- Always unplug the refrigerator Vor jeglichen Reparatur- oder Wartungsarbeiten den Netzstecker ziehen.
- Turn off the main water supply to the refrigerator before disconnecting any water lines to prevent flooding.
- Tragen Sie geeignete persönliche Schutzausrüstung wie Handschuhe und Schutzbrille.
- Wenn Sie sich bei einem der Schritte unsicher sind, wenden Sie sich an einen qualifizierten Haushaltsgerätetechniker.
- Have a towel or absorbent cloth ready to catch any residual water when disconnecting lines.
3. Einrichtung und Installation
Replacing the refrigerator water valve is a straightforward process that can typically be completed in about 10 minutes. Follow these steps carefully:
Erforderliche Werkzeuge:
- Half-inch wrench
- Quarter-inch nut driver
- Flachkopfschraubenzieher
- Towel or absorbent cloth
Installationsschritte:
- Bereiten Sie den Kühlschrank vor: Carefully pull the refrigerator away from the wall to access its rear. Unplug the refrigerator from the electrical outlet and turn off the main water supply valve to the refrigerator.
- Zugang zum Ventil: Locate the rear access panel at the bottom of the refrigerator. Use a nut driver or screwdriver to remove the bolts or screws securing this panel, then carefully remove the panel.
- Wasserzufuhr unterbrechen: Identify the existing water inlet valve. Use a half-inch wrench to disconnect the water supply copper tubing from the valve. Be prepared for a small amount of residual water.
- Altes Ventil ausbauen: Use a nut driver to remove the screws that secure the old water valve to the refrigerator frame. Carefully disconnect the two wire connectors and the water line hoses from the old valve. Note their positions to ensure correct reassembly.
- Neues Ventil einbauen: Position the new Robertshaw IMV708 W10408179 water valve in place. Reconnect the wire connectors and water line hoses to their corresponding ports on the new valve. Ensure all connections are firm and secure.
- Sichern und testen: Reattach the valve to the refrigerator frame with the screws. Reconnect the water supply copper tubing. Turn on the main water supply and carefully check all connections for any leaks. Once confirmed leak-free, plug the refrigerator back into the electrical outlet.
- Endgültige Platzierung: Replace the rear access panel and push the refrigerator back into its original position.
Videoanleitung zur Installation:
Video: A detailed guide on how to replace the IMV708 W10408179 Refrigerator Water Valve for Whirlpool and compatible models. This video demonstrates the steps for removal and installation of the water valve.
4. Bedienungsanleitung
The Robertshaw IMV708 W10408179 water valve is an automatic component. It functions under the control of your refrigerator's internal systems. When the ice maker calls for water or the water dispenser lever is pressed, the valve opens to allow water to flow. It then closes automatically once the required amount of water has been dispensed or the ice maker cycle is complete.
5. Wartung
- Regelmäßige Inspektion: Periodically inspect the water valve and all connected water lines for any signs of leaks, cracks, or corrosion. Early detection can prevent significant water damage.
- Wasserfilter: If your refrigerator has a water filter, ensure it is replaced according to the refrigerator manufacturer's recommendations. A clogged filter can reduce water flow and put undue strain on the water valve.
- Sauberkeit: Keep the area around the water valve and the rear of the refrigerator clean and free of dust and debris to ensure proper ventilation and operation.
6. Fehlerbehebung
No Water to Ice Maker or Dispenser:
- Wasserversorgung prüfen: Ensure the main water supply valve to the refrigerator is fully open.
- Stromanschluss: Verify the refrigerator is plugged in and receiving power.
- Kinked Water Line: Inspect the water lines behind the refrigerator for any kinks or blockages that might restrict water flow.
- Clogged Water Filter: A clogged water filter can severely restrict water flow. Replace the water filter if it's due for replacement.
- Faulty Valve: If the valve is leaking or not activating, it may need replacement.
Wasser läuft aus:
- Sofortige Aktion: Immediately turn off the water supply to the refrigerator and unplug it.
- Verbindungen prüfen: Check all connections to the water valve and hoses for tightness. Tighten any loose fittings.
- Damaged Valve/Hose: If the leak originates from the valve body itself or a damaged hose, the component will need to be replaced.
Slow Water Dispensing:
- Wasserfilter: A partially clogged water filter is a common cause. Replace the filter.
- Niedriger Wasserdruck: Verify that your household water pressure is adequate.
7. Spezifikationen
| Besonderheit | Spezifikation |
|---|---|
| Marke | Robertshaw |
| Modellnummer | IMV708 |
| Teilenummer | IMV708 |
| Material | Metall |
| Außenverkleidung | Chrom |
| Einlassverbindungstyp | Gewinde |
| Auslassanschlusstyp | G Connector |
| Anzahl der Ports | 3 |
| Größe des Auslassanschlusses | 0.25 Zoll |
| Spezifikation erfüllt | UL |
| Artikelgewicht | 9.6 Unzen |
| Verpackungsabmessungen | 8.19 x 4.84 x 3.43 Zoll |
| Batterien enthalten? | NEIN |
| Batterien erforderlich? | NEIN |
| UPC | 191175006031 |
8. Garantieinformationen
Warranty information for this specific Robertshaw IMV708 W10408179 water valve is not provided in the product details. For detailed warranty terms and conditions, please refer to the manufacturer's official website or contact Robertshaw customer service directly.
9. Unterstützung
For further assistance, technical support, or inquiries regarding the Robertshaw IMV708 W10408179 Refrigerator Water Valve, please contact Robertshaw customer service through their official channels. You may also consult a qualified appliance technician for professional installation or diagnosis.