1. Einleitung
The SOMMER Pearl Twin S10019-00001 is a high-quality 2-command remote control transmitter designed for use with SOMMER garage door operators. It features an interference-resistant radio signal and robust 128-bit encryption for secure and reliable operation. This manual provides essential information for the proper setup, operation, and maintenance of your remote control.
2. Produktüberschreitungview
The Pearl Twin remote control features two buttons for operating your garage door or other compatible SOMMER devices. Its compact design ensures ease of use and portability.

Image 1: SOMMER Pearl Twin S10019-00001 remote control in its retail packaging, showing the front of the device with two grey buttons and the SOMMER logo.

Image 2: Back of the SOMMER Pearl Twin S10019-00001 packaging, displaying technical details such as model number (S10019), frequencies (868.8 MHz, 868.95 MHz), battery type (3V, CR2032), and manufacturer information.
3. Einrichtung und Programmierung
To use your SOMMER Pearl Twin remote control, it must first be programmed to your SOMMER garage door operator. The programming process is straightforward:
- Locate the Programming Button: On your SOMMER garage door operator's control unit, find the programming button. This button is often labeled "Radio" or may be a distinct color, such as blue. Refer to your garage door operator's manual for its exact location.
- Programmiermodus aktivieren: Press and release the programming button on the operator. The indicator light on the operator will typically illuminate or flash, indicating it is in programming mode.
- Fernbedienung programmieren: Within a few seconds of activating programming mode on the operator, press and hold the desired button on your Pearl Twin remote control that you wish to program.
- Kopplung bestätigen: Release the button on the remote control once the operator's indicator light confirms successful pairing. This confirmation may be indicated by the light flashing rapidly, changing color, or turning off.
- Testbetrieb: Test the remote control to ensure it operates the garage door correctly. If not, repeat the programming steps.
4. Bedienungsanleitung
Once programmed, operating your SOMMER Pearl Twin remote control is simple:
- Tür öffnen/schließen: Press the programmed button on the remote control to open or close your garage door.
- Betrieb stoppen: Pressing the button again during the door's movement will stop the door at its current position.
5. Wartung
The SOMMER Pearl Twin remote control requires minimal maintenance, primarily battery replacement.
Batteriewechsel
The remote control is powered by a CR2032 3V lithium coin cell battery. When the remote's range decreases or it stops responding, it is likely time to replace the battery.
- Batteriefach öffnen: Locate the battery compartment on the back of the remote control. Use a small screwdriver or a coin to carefully open the compartment cover.
- Alte Batterie entfernen: Remove the old CR2032 battery from its holder.
- Neue Batterie einlegen: Insert a new CR2032 3V lithium coin cell battery, ensuring that the positive (+) side faces upwards, as indicated in the compartment.
- Fach schließen: Schließen Sie den Batteriefachdeckel sicher.
Entsorgung: Entsorgen Sie alte Batterien gemäß den örtlichen Vorschriften. Batterien dürfen nicht im Hausmüll entsorgt werden.
6. Fehlerbehebung
If you encounter issues with your SOMMER Pearl Twin remote control, refer to the following troubleshooting tips:
- Fernbedienung reagiert nicht:
- Check the battery. Replace it if it is low or depleted (refer to Section 5).
- Ensure the remote is within range of the garage door operator.
- Re-program the remote control to the garage door operator (refer to Section 3).
- Begrenzte Reichweite:
- Ersetzen Sie die Batterie.
- Ensure there are no significant obstructions (e.g., metal objects, thick walls) between the remote and the operator.
- Check for sources of radio interference in the vicinity (e.g., other wireless devices).
- Door Opens/Closes Unintentionally:
- Ensure the remote control buttons are not being accidentally pressed (e.g., in a pocket or bag).
- If the issue persists, re-program the remote control.
Sollten diese Schritte das Problem nicht beheben, wenden Sie sich bitte an den Kundendienst oder einen qualifizierten Techniker.
7. Spezifikationen
| Besonderheit | Spezifikation |
|---|---|
| Modellnummer | S10019-00001 (RPT404) |
| Hersteller | SOMMER |
| Frequenz | 868.8 MHz, 868.95 MHz |
| Codierung | 128-Bit |
| Reichweite | Approx. 50 - 140 m (depending on external conditions) |
| Akku-Typ | 1 x CR2032 3V Lithium Coin Cell (included) |
| Abmessungen (L x B x H) | 79 x 26 x 13 mm |
| Gewicht | 30 g |
8. Garantieinformationen
Specific warranty terms for the SOMMER Pearl Twin S10019-00001 remote control may vary. Please retain your proof of purchase and refer to the warranty documentation provided by your retailer or contact SOMMER directly for detailed warranty information.
9. Unterstützung
For further assistance, technical support, or inquiries regarding your SOMMER Pearl Twin S10019-00001 remote control, please contact:
- Your authorized SOMMER retailer.
- The official SOMMER customer service (contact details typically available on the manufacturer's webSeite? ˅).