Einführung
This manual provides essential information for the assembly, operation, maintenance, and troubleshooting of your Genesis Nitro 950 Gaming Chair. Please read these instructions carefully before assembly and use to ensure proper function and safety. Keep this manual for future reference.
Sicherheitshinweise
- Vor der Montage sicherstellen, dass alle Komponenten vorhanden und unbeschädigt sind. Nicht verwenden, wenn Teile fehlen oder beschädigt sind.
- Follow assembly instructions precisely. Incorrect assembly can lead to instability and injury.
- Bitte nicht auf dem Stuhl stehen. Benutzen Sie ihn nur zum Sitzen.
- Die maximale Tragfähigkeit von 150 kg (330 lbs) darf nicht überschritten werden.
- Halten Sie Kinder und Haustiere während der Montage fern. Kleinteile können verschluckt werden und eine Erstickungsgefahr darstellen.
- Überprüfen Sie regelmäßig alle Schrauben und Bolzen auf festen Sitz. Ziehen Sie sie gegebenenfalls nach.
- Um eine Materialbeeinträchtigung zu vermeiden, sollte der Stuhl weder direkter Sonneneinstrahlung noch extremen Temperaturen ausgesetzt werden.
Packungsinhalt
Before beginning assembly, verify that all components are included in your package. While specific part names may vary, a typical gaming chair package includes:
- Sitzbasis
- Rückenlehne
- Armlehnen (2)
- Sternbasis
- Rollen (5)
- Gasdruckfeder
- Gas lift cover
- Mechanismusplatte
- Lendenkissen
- Kopfstützenkissen
- Hardware-Kit (Schrauben, Unterlegscheiben, Inbusschlüssel)
Einrichtung und Montage
Assembly is required for this product. Follow these general steps for proper setup. Refer to the included assembly diagram for detailed visual guidance.
- Befestigen Sie die Rollen an der Sternbasis: Insert each of the five casters into the holes at the end of the star base arms until they click securely into place.
- Gaslift einsetzen: Setzen Sie den Gasliftzylinder in die zentrale Öffnung des Sternfußes ein. Decken Sie den Gasliftzylinder mit der teleskopierbaren Kunststoffabdeckung ab.
- Mount Mechanism Plate: Align the mechanism plate with the screw holes on the underside of the seat base. Ensure the front of the mechanism (usually indicated by a label or the lever side) faces the front of the seat. Secure with screws and washers using the provided Allen key.
- Armlehnen anbringen: Secure the armrests to the sides of the seat base using the designated screws. Do not overtighten initially to allow for minor adjustments.
- Connect Seat to Backrest: Attach the backrest to the seat base using the side brackets and screws. Ensure proper alignment before tightening all screws firmly.
- Sitzbaugruppe auf den Gasdruckfederhebel aufsetzen: Setzen Sie den zusammengebauten Sitz und die Rückenlehne vorsichtig auf den Gasdruckfederzylinder und achten Sie darauf, dass sie mittig und stabil sitzen.
- Kissen anbringen: Position the lumbar cushion and headrest cushion using their straps as desired for ergonomic support.
Bedienungsanleitung
The Genesis Nitro 950 Gaming Chair offers several adjustment features to customize your seating experience.
1. Sitzhöhenverstellung
To adjust the seat height, locate the lever on the right side, beneath the seat. While seated, pull the lever up to lower the seat. To raise the seat, stand up slightly and pull the lever up. Release the lever at the desired height to lock it in place.
2. Verstellung der Rückenlehnenneigung
The backrest can be reclined up to 165 degrees. Locate the recline lever on the right side of the chair, near the seat. Pull the lever up to release the backrest lock, then lean back to the desired angle. Release the lever to lock the backrest in position.
3. Armlehnenverstellung
The armrests are four-way adjustable. Depending on the specific model, adjustments may include height, forward/backward, left/right swivel, and inward/outward angle. Locate the buttons or levers on the armrests to unlock and adjust them. Press or lift the control, move the armrest to the desired position, and release to lock.
4. Rocker and Locking Function (Frog Mechanism)
The chair is equipped with an advanced mechanism that allows for a rocking motion and the ability to lock the chair in any position. To enable rocking, pull out the lever located on the left side, beneath the seat. To disable rocking and lock the chair in an upright or reclined position, push the lever back in.
5. Lumbar and Headrest Cushion Positioning
The ergonomic headrest and lumbar cushion are filled with memory foam for comfort. Adjust their position by sliding them along the straps on the backrest to find optimal support for your neck and lower back.
Wartung
Regular maintenance helps prolong the life and appearance of your Genesis Nitro 950 Gaming Chair.
- Reinigung: Mit Anzeige abwischenamp cloth. For ecological leather, use a mild soap solution if necessary, then wipe dry immediately. Avoid abrasive cleaners or solvents.
- Befestigungsmaterial: Periodically check all screws and bolts, especially after initial assembly and every few months, to ensure they remain tight. Retighten as needed to maintain stability.
- Rollen: Um eine reibungslose Bewegung zu gewährleisten, sollten die Rollen frei von Haaren, Staub und Schmutz sein.
- Gaslift: Do not attempt to disassemble or repair the gas lift cylinder. It contains pressurized gas.
Fehlerbehebung
If you encounter issues with your Genesis Nitro 950 Gaming Chair, refer to the following common problems and solutions:
| Problem | Mögliche Ursache | Lösung |
|---|---|---|
| Der Stuhl ist instabil oder wackelig. | Loose screws or incorrect assembly | Check and tighten all assembly screws. Ensure the gas lift is fully seated in the star base and mechanism. |
| Sitzhöhenverstellung funktioniert nicht | Gas lift issue or lever mechanism obstruction | Ensure the lever is fully engaged. Check for any obstructions. If the gas lift is faulty, it may need replacement (contact support). |
| Die Rückenlehne lässt sich weder verstellen noch arretieren. | Recline lever not engaged or mechanism obstruction | Ensure the recline lever is fully pulled or pushed to engage/disengage the lock. Check for obstructions around the mechanism. |
| Quietschgeräusche | Lose Verbindungen oder Reibung zwischen Teilen | Ziehen Sie alle Schrauben fest. Tragen Sie gegebenenfalls eine kleine Menge Silikonfett auf bewegliche Teile oder Verbindungsstellen auf. |
| Die Rollen laufen nicht reibungslos | Schutt in Rollen | Entfernen Sie Haare, Staub und Schmutz von den Lenkrollen. |
Technische Daten
Detailed specifications for the Genesis Nitro 950 Gaming Chair:
| Besonderheit | Detail |
|---|---|
| Marke | Genesis |
| Modellname | Nitro 950 |
| Modellnummer | NFG-1366 |
| Farbe | Schwarz |
| Material | Ecological Leather, Memory Foam (fill), Alloy Steel (frame) |
| Produktabmessungen (T x B x H) | 34.25" x 27.95" x 14.37" (87 x 71 x 36.5 cm) |
| Artikelgewicht | 28.72 Kilogramm (ca. 63.3 Pfund) |
| Maximalgewichtsempfehlung | 150 Kilogramm (ca. 330 Pfund) |
| Neigungswinkel der Rückenlehne | Bis zu 165° |
| Armlehnentyp | Four-way adjustable |
| Mechanismus | Advanced rocker and locking function |
| Rollen | Robust large wheels with brakes, plastic-coated for scratch-resistant surfaces |
| Montage erforderlich | Ja |
| Empfohlene Verwendung | Gaming, Büro |
Garantieinformationen
For specific warranty terms and conditions, please refer to the documentation provided at the time of purchase or contact your retailer. Warranty coverage typically includes manufacturing defects for a specified period from the date of purchase.
Kundenservice
If you require further assistance, have questions about your product, or need to report a missing or damaged part, please contact the retailer where you purchased the Genesis Nitro 950 Gaming Chair or visit the official Genesis webWebsite für Support-Kontaktinformationen.