JLab Play Gaming Wireless Earbuds Instruction Manual

Einführung

The JLab Play Gaming Wireless Earbuds are designed for an immersive gaming experience across mobile and console platforms. Featuring Bluetooth 5 with 60ms super-low latency, a built-in microphone with quick mute, and an included AUX console cord, these earbuds offer versatile connectivity and clear audio for both solo play and team communication.

Im Leistungsumfang enthalten

• JLab Play Gaming Wireless Earbuds
• Reisetasche
• AUX Console Cord (3.5mm)
• Micro-USB-Ladekabel
• Multiple sizes of silicone ear tips for optimal fit

Image: JLab Play Gaming Wireless Earbuds, Micro USB charging cable, 3.5mm AUX console cord, travel bag, and various ear tip sizes.

Installationshandbuch

1. Erstes Aufladen

Before first use, fully charge your JLab Play Gaming Wireless Earbuds. Connect the provided Micro USB charging cable to the charging port on the earbuds and to a USB power source. The indicator light will show charging status.

Rapid Charge Feature: 10 minutes of charging provides over 1 hour of playtime.

2. Bluetooth Pairing (Mobile Devices)

1. Stellen Sie sicher, dass die Ohrhörer ausgeschaltet sind.
2. Press and hold the power button on the earbuds for approximately 10 seconds until the indicator light flashes red and blue. This indicates pairing mode.
3. On your mobile device (iOS or Android), navigate to the Bluetooth settings.
4. Select "JLab Play Earbuds" from the list of available devices.
5. Once connected, the indicator light on the earbuds will turn solid blue.

3. Console Connection (Wired)

For console gaming (Xbox, PlayStation, Nintendo Switch), use the included 3.5mm AUX console cord.

1. Locate the 3.5mm audio jack on your gaming console controller or device.
2. Plug one end of the AUX console cord into the earbuds' 3.5mm port.
3. Plug the other end of the AUX console cord into your console controller or device.
4. Ensure the microphone mute switch on the AUX cord is in the 'on' position if you intend to use voice chat.

Image: JLab Play Gaming Wireless Earbuds shown with the AUX console cord, illustrating wired connection capability.

Bedienungsanleitung

1. Bedienelemente

The earbuds feature an in-line remote with buttons for various functions:

• Ein-/Ausschalten: Halten Sie die Haupttaste gedrückt.
• Abspielen/Pause: Einmal die Haupttaste drücken.
• Anruf annehmen/beenden: Drücken Sie während eines eingehenden Anrufs einmal die Haupttaste.
• Eingehenden Anruf abweisen: Halten Sie die Haupttaste 2 Sekunden lang gedrückt.
• Lautstärke erhöhen: Single press the '+' button.
• Lautstärke runter: Single press the '-' button.
• Weiterverfolgen: Halten Sie die Taste „+“ 2 Sekunden lang gedrückt.
• Track rückwärts: Die Taste „-“ 2 Sekunden lang gedrückt halten.
• Switch Gaming/Music EQ: Press and hold both '+' and '-' buttons for 2 seconds to cycle between Gaming and Music sound modes.

2. Mikrofonnutzung

The earbuds include a built-in microphone for voice communication. When using the AUX console cord, a dedicated mute switch is available on the cord for quick control.

• Microphone On: Ensure the switch on the AUX console cord is in the 'on' position.
• Microphone Off (Mute): Slide the switch on the AUX console cord to the 'off' position.

Image: A user engaged in mobile gaming while wearing the JLab Play Gaming Wireless Earbuds, highlighting their use for portable entertainment.

Wartung

1. Reinigung

• Reinigen Sie die Silikon-Ohrstöpsel regelmäßig mit einem weichen, fusselfreien Tuch.amp Tuch.
• Gently wipe the earbuds and cables with a dry, soft cloth to remove dust and debris.
• Vermeiden Sie die Verwendung scharfer Chemikalien oder scheuernder Materialien zum Reinigen.

2. Speicherung

• When not in use, store the earbuds in the provided travel bag to protect them from damage.
• The magnetic earbuds can be clicked together to prevent tangling when worn around the neck or stored.
• An einem kühlen, trockenen Ort aufbewahren und vor extremen Temperaturen schützen.

Image: The JLab Play Gaming Wireless Earbuds with their magnetic earpieces connected, demonstrating a convenient storage method.

Fehlerbehebung

1. Earbuds Not Pairing via Bluetooth

• Stellen Sie sicher, dass die Ohrhörer vollständig aufgeladen sind.
• Confirm the earbuds are in pairing mode (flashing red and blue light).
• Schalten Sie Bluetooth an Ihrem Gerät aus und wieder ein.
• Forget/delete "JLab Play Earbuds" from your device's Bluetooth list and attempt to re-pair.
• Bringen Sie die Ohrhörer näher an Ihr Gerät heran.

2. Kein Ton oder geringe Lautstärke

• Überprüfen Sie die Lautstärke sowohl an den Ohrhörern als auch an Ihrem angeschlossenen Gerät.
• Ensure the earbuds are properly connected (Bluetooth or AUX).
• If using AUX, ensure the cable is fully inserted into both the earbuds and the device.
• Try switching between Gaming and Music EQ modes.

3. Mikrofon funktioniert nicht

• If using the AUX console cord, verify the microphone mute switch is in the 'on' position.
• Ensure your device's microphone settings are configured to use the JLab Play Earbuds.
• Testen Sie das Mikrofon mit einer anderen Anwendung oder einem anderen Gerät.

Technische Daten

Garantieinformationen

The JLab Play Gaming Wireless Earbuds come with a JLab Zwei-Jahres-Garantie. For detailed terms and conditions, please refer to the official JLab webWebsite oder wenden Sie sich an den Kundendienst.

Kundenservice

For further assistance, troubleshooting, or warranty claims, please visit the official JLab support page:

Visit JLab Support

Sie finden dort möglicherweise auch hilfreiche Ressourcen und FAQs. webWebsite.