Einführung
This instruction manual provides essential information for the safe and correct installation, operation, and maintenance of your Bernstein TWG62 Wall-Mounted Mineral Cast Washbasin. Please read this manual thoroughly before installation and retain it for future reference. Incorrect installation or use may lead to damage or injury.
Sicherheitshinweise
- Always ensure the wall structure is suitable and strong enough to support the weight of the washbasin (36 kg) plus any additional load (water, items). Consult a structural engineer if unsure.
- Installation should be performed by qualified personnel or a competent plumber.
- Tragen Sie während der Installation geeignete persönliche Schutzausrüstung (PSA), einschließlich Schutzbrille und Handschuhe.
- Vor Beginn der Installation muss sichergestellt werden, dass alle Wasserleitungen abgestellt sind.
- Handle the washbasin with care to prevent chipping or damage to the mineral cast material.
- Halten Sie Kinder und Haustiere vom Installationsbereich fern.
Packungsinhalt
Vor Beginn der Installation prüfen Sie, ob alle Komponenten vorhanden und unbeschädigt sind.
- Bernstein TWG62 Wall-Mounted Mineral Cast Washbasin (100x46x20 cm)
- Befestigungsmaterial (Schrauben, Dübel usw.)
- Installation template (if provided)
Note: Faucet, drain valve, and siphon are not included and must be purchased separately.
Setup und Installation
Follow these steps carefully for proper installation. It is recommended to have two people for lifting and positioning the washbasin aufgrund seines Gewichts.
1. Vorbereitung
- Packen Sie alle Komponenten aus und überprüfen Sie sie auf Beschädigungen.
- Determine the desired mounting height. The top edge of the washbasin is typically installed at 85-90 cm from the finished floor, but adjust according to user preference.
- Locate and mark the positions for water supply lines and the drain pipe on the wall.
- The faucet hole is not pre-drilled. Mark the desired position for your faucet on the washbasin and drill carefully using an appropriate drill bit for mineral cast.
2. Wandmontage
- Using the provided mounting template (if applicable) or by measuring directly from the washbasin, mark the drilling points for the wall mounting bolts on the wall. Ensure these marks are level.
- Drill holes at the marked positions using a drill bit suitable for your wall material.
- Setzen Sie die passenden Dübel in die vorgebohrten Löcher ein.
- Secure the mounting bolts or brackets (part of the included mounting hardware) into the wall plugs. Ensure they are firmly tightened.
- Carefully lift the washbasin and align it with the mounting bolts/brackets. Slide the washbasin onto the bolts/brackets.
- Secure the washbasin to the wall using the remaining mounting hardware (e.g., nuts and washers). Do not overtighten, but ensure the washbasin ist stabil und sicher.
Figure 1: Technical drawing with overall dimensions (1000mm width, 460mm depth, 200mm height).
Abbildung 2: Detailansicht der Seite view showing internal dimensions and drain channel (e.g., 92mm depth to drain).
Abbildung 3: Querschnitt view illustrating the drain channel and mounting points.
3. Installation von Armatur und Abfluss
- Install your chosen faucet according to its manufacturer's instructions into the drilled hole on the washbasin.
- Install the drain valve and siphon according to their respective manufacturer's instructions. Ensure all connections are watertight.
- Schließen Sie die Wasserzuleitungen an den Wasserhahn an.
- Turn on the main water supply and check for any leaks at all connections. Tighten as necessary.
Figure 4: The Bernstein TWG62 washbasin installiert, Showcasing sein Design und seine Funktionen.
Bedienungsanleitung
The Bernstein TWG62 washbasin is designed for standard bathroom use. Its integrated towel rail and storage compartment provide convenient functionality.
- Use the faucet to control water flow and temperature as usual.
- Die Waschbasin features a drain channel without an overflow. Ensure the faucet is not left running unattended to prevent accidental flooding.
- Utilize the integrated towel rail for hanging hand towels and the storage surface for bathroom essentials.
Wartung und Pflege
To maintain the appearance and longevity of your mineral cast washbasin, befolgen Sie diese Pflegehinweise:
- Tägliche Reinigung: Clean the washbasin regularly with a soft cloth and a mild, non-abrasive liquid cleaner. Rinse thoroughly with water and dry with a soft cloth to prevent water spots.
- Vermeiden Sie Scheuermittel: Do not use abrasive cleaners, scouring pads, or harsh chemicals (e.g., strong acids, ammonia-based cleaners) as these can damage the surface finish.
- Fleckentfernung: For stubborn stains, a diluted solution of mild detergent or a specialized mineral cast cleaner can be used. Always test on an inconspicuous area first.
- Hitzebeständigkeit: While mineral cast is durable, avoid placing extremely hot items directly on the surface without protection.
- Kratzer: Minor scratches on the matt surface can often be buffed out with a fine abrasive pad (e.g., Scotch-Brite white pad) and a small amount of mineral cast polishing paste, followed by thorough rinsing. Consult a professional for deeper damage.
Fehlerbehebung
| Problem | Mögliche Ursache | Lösung |
|---|---|---|
| Wasserleck an den Anschlüssen | Lose Verbindungen, beschädigte Dichtungen. | Tighten connections. Replace seals if damaged. Ensure plumber's tape or sealant was used correctly. |
| Langsame Entwässerung | Partial blockage in the drain or siphon. | Remove and clean the siphon. Use a drain cleaner suitable for plumbing systems if necessary. |
| Waschbasin fühlt sich instabil an | Mounting bolts/brackets not securely fastened or wall structure insufficient. | Re-check all mounting hardware for tightness. Ensure wall plugs are appropriate for the wall material. If the wall is insufficient, reinforce it or consult a professional. |
| Surface discoloration/stains | Hard water deposits, chemical residue, or prolonged contact with staining agents. | Clean with a mild descaler for hard water. For other stains, use a specialized mineral cast cleaner. Avoid abrasive scrubbing. |
Technische Daten
- Modell: TWG62
- Marke: Bernstein Badshop
- Material: Mineral Cast (Solid Stone)
- Farbe: Weiß Matt
- Abmessungen (B x T x H): 100 x 46 x 20 cm
- Gewicht: 36 kg
- Installationstyp: Wandmontage
- Wasserhahnloch: Not pre-drilled (suitable for one faucet)
- Überlauf: Kein Überlauf
- Besondere Merkmale: Integrated towel rail, storage surface, pre-drilled holes for wall mounting, drain channel.
Garantieinformationen
Bernstein Badshop products are manufactured to high-quality standards. This product comes with a standard manufacturer's warranty against defects in materials and workmanship. The specific duration and terms of the warranty may vary by region and purchase date. Please retain your proof of purchase for warranty claims.
For detailed warranty terms and conditions, please refer to the documentation provided with your purchase or visit the official Bernstein Badshop webWebsite.
Support und Kontakt
If you encounter any issues or have questions regarding your Bernstein TWG62 washbasin that are not covered in this manual, please contact Bernstein Badshop customer support.
Bernstein Badshop
Visit the Bernstein Store on Amazon
Please have your model number (TWG62) and proof of purchase ready when contacting support.