iBeam Micro Kamera Schwarz Festwinkel Benutzerhandbuch

1. Einleitung

This manual provides detailed instructions for the installation, operation, and maintenance of your iBeam Micro Camera Black Fixed Angle (Model TE-MICM). This camera is designed to enhance vehicle safety by providing clear visual assistance. Please read this manual thoroughly before installation and use to ensure proper function and safety.

2. Sicherheitshinweise

• Vor Beginn jeglicher elektrischer Installationen muss immer die Fahrzeugbatterie abgeklemmt werden.
• Stellen Sie sicher, dass alle Kabel ordnungsgemäß isoliert und befestigt sind, um Kurzschlüsse oder Beschädigungen zu vermeiden.
• Den Fahrer nicht behindern. view oder die Fahrzeugsteuerung während der Installation beeinträchtigen.
• Ziehen Sie einen professionellen Installateur zu Rate, wenn Sie sich bei irgendeinem Teil des Installationsprozesses unsicher sind.
• This product is intended as an aid and should not replace safe driving practices.

3. Packungsinhalt

Überprüfen Sie, ob alle Artikel im Paket vorhanden sind:

• iBeam Micro Camera Black Fixed Angle (TE-MICM)
• Mounting Hardware (8MM threaded bolt, nuts, washers)
• Kabelbaum
• Bedienungsanleitung (dieses Dokument)

Image: The retail packaging for the iBeam Micro Camera, showing the camera and its model number on the box.

4. Produktüberschreitungview

The iBeam Micro Camera (TE-MICM) is a compact, fixed-angle camera designed for various vehicle applications, including backup assistance. It features a durable, water-resistant design and provides a clear image for enhanced visibility.

Bild: Eine Nahaufnahme view of the iBeam Micro Camera, highlighting its compact black housing and the camera lens.

Hauptmerkmale:

• Kompaktes Design: Small footprint for discreet installation.
• Wasserfest: IP68 rated for reliable performance in various weather conditions.
• Bildsensor: 1/4 CMOS image sensor for clear video output.
• Switchable Image: Mirror/Normal image option for versatile mounting (e.g., rear view oder vorne view).
• Montage: Features an 8MM threaded bolt for secure mounting.

5. Einrichtung und Installation

Follow these steps for proper installation of your iBeam Micro Camera:

1. Montageort wählen: Wählen Sie einen Standort mit freier Sicht view and allows for secure mounting. Common locations include above the license plate, on the bumper, or integrated into a vehicle panel. Consider the 18.7mm height of the camera housing for clearance.
2. Montagefläche vorbereiten: If drilling is required, ensure no existing wiring or components will be damaged. Drill a hole appropriate for the 8MM threaded bolt.
3. Montieren Sie die Kamera: Insert the 8MM threaded bolt through the prepared hole and secure the camera using the provided nuts and washers. Ensure the camera is oriented correctly for the desired view.
4. Kabelverbindungen:
   • Connect the camera's power wire (typically red) to a 12V power source that is activated when the camera is needed (e.g., reverse light circuit for a backup camera, or ignition-switched power for a front camera).
   • Connect the camera's ground wire (typically black) to a clean chassis ground point.
   • Connect the video output cable from the camera to the video input of your display monitor or head unit.
5. Testfunktionalität: Before reassembling vehicle panels, test the camera's operation. Turn on the vehicle and engage the appropriate gear (e.g., reverse) to activate the camera. Verify that the image appears clearly on your display.
6. Sichere Verkabelung: Route all cables safely away from moving parts, heat sources, and sharp edges. Use zip ties or electrical tape to secure wiring.

Image: Illustration showing two common mounting options for the iBeam Micro Camera: a flush mount and a lip mount using the threaded bolt.

6. Bedienungsanleitung

Once installed, the iBeam Micro Camera operates automatically when power is supplied to it and the connected display is active.

• Backup Camera Use: If connected to the reverse light circuit, the camera image will automatically appear on your display when the vehicle is shifted into reverse.
• Front/Side Camera Use: If connected to an ignition-switched power source or a manual switch, the camera can be activated as needed.
• Bildausrichtung: The camera supports switchable mirror/normal image output. Refer to your installer or the camera's wiring diagram for instructions on how to change this setting, typically by cutting a specific wire loop.

7. Wartung

The iBeam Micro Camera is designed for low maintenance. Follow these guidelines to ensure longevity:

• Reinigung: Reinigen Sie das Kameraobjektiv regelmäßig mit einem weichen Tuch.amp Tuch zum Entfernen von Schmutz, Staub oder Wasserflecken, die die Sicht behindern könnten view. Do not use abrasive cleaners.
• Inspektion: Regularly check the camera's mounting and wiring connections to ensure they remain secure and free from damage.
• Vermeiden Sie Hochdruckreinigung: While water-resistant, avoid directing high-pressure water sprays directly at the camera lens or housing, as this could potentially compromise the seal.

8. Fehlerbehebung

If you experience issues with your iBeam Micro Camera, refer to the following common problems and solutions:

9. Spezifikationen

10. Garantie und Support

For warranty information and technical support, please contact iBeam customer service or visit the official iBeam webBewahren Sie Ihren Kaufbeleg als Kaufnachweis für eventuelle Garantieansprüche auf.

Hersteller: Metra Electronics Corp