Crivit 3D Sensor Pedometer Instruction Manual

Einführung

This manual provides essential information for the proper use and maintenance of your Crivit 3D Sensor Pedometer, Model 307012. This device is designed to track your physical activity, including steps, distance, and calories burned, using advanced 3D sensor technology. Please read these instructions carefully before using the pedometer to ensure optimal performance and longevity.

Merkmale

• 3D Sensor Technology: Allows for accurate step counting regardless of placement (e.g., pocket, keychain).
• Multifunktionsanzeige: Shows number of steps, distance, duration, speed, calorie consumption, fat burn, temperature, and current time.
• 7-Tage-Speicher: Stores activity data for the past seven days.
• Personalisierte Einstellungen: Individual adjustment for body height, weight, and stride length for improved accuracy.
• Von hinten beleuchteter LCD-Bildschirm: Bietet klare Sicht bei unterschiedlichen Lichtverhältnissen.
• Attachment Clip: For secure and convenient carrying.
• Batterie im Lieferumfang enthalten: Operates with one CR2032 3V battery.

Produkt überview

Image: The Crivit 3D Sensor Pedometer, featuring a red casing, an LCD screen, and an integrated clip for attachment. The display shows numerical data.

Aufstellen

1. Einlegen der Batterie

1. Suchen Sie das Batteriefach auf der Rückseite des Schrittzählers.
2. Verwenden Sie eine kleine Münze oder einen Schraubendreher, um die Batterieabdeckung zu öffnen.
3. Insert one CR2032 3V battery with the positive (+) side facing up.
4. Bringen Sie die Batterieabdeckung wieder an und sichern Sie sie.

2. Grundeinstellungen

Upon first use or after battery replacement, you will need to set your personal data for accurate tracking.

1. Zeiteinstellung: Follow the on-screen prompts to set the current time (12-hour or 24-hour format).
2. Einheitenauswahl: Choose between metric (cm/kg) or imperial (inches/lbs) units.
3. Höhe: Geben Sie Ihre Körpergröße ein.
4. Gewicht: Enter your body weight.
5. Schrittlänge: Measure and enter your average stride length. This can be estimated by walking 10 steps, measuring the total distance, and dividing by 10.
6. Confirm all settings to save.

Bedienungsanleitung

1. Ein-/Ausschalten

• The pedometer typically powers on automatically when activity is detected or a button is pressed.
• To conserve battery, the device may enter a sleep mode after a period of inactivity. Press any button to wake it up.

2. Navigation durch die Anzeigemodi

Use the mode button (usually labeled 'MODE' or similar) to cycle through different display screens:

• Schritte: Displays the total number of steps taken for the current day.
• Distanz: Zeigt die insgesamt zurückgelegte Strecke an.
• Kalorien: Zeigt den geschätzten Kalorienverbrauch an.
• Dauer: Displays the active time.
• Geschwindigkeit: Shows your average speed.
• Fat Burn: Displays an estimate of fat burned.
• Temperatur: Zeigt die Umgebungstemperatur an.
• Zeit: Zeigt die aktuelle Uhrzeit an.

3. Resetting Daily Data

To reset the daily activity data (steps, distance, calories) to zero, typically press and hold the 'RESET' button for a few seconds while on the main display screen. Refer to the specific button layout on your device.

4. Accessing 7-Day Memory

The pedometer stores data for the past seven days. Use the 'MEMORY' or 'HISTORY' button (if available) to review previous days' activity. The display will typically show the date and the corresponding activity data.

Wartung

Reinigung

Wipe the pedometer with a soft, dry cloth. Do not use abrasive cleaners or solvents, as these can damage the device. Avoid submerging the pedometer in water.

Batteriewechsel

When the battery indicator appears low or the display becomes dim, replace the CR2032 3V battery following the installation steps in the 'Setup' section. Dispose of used batteries responsibly according to local regulations.

Lagerung

Bewahren Sie den Schrittzähler bei längerer Nichtbenutzung an einem kühlen, trockenen Ort fern von direkter Sonneneinstrahlung und extremen Temperaturen auf.

Fehlerbehebung

• Pedometer not counting steps:
  - Ensure the battery is correctly installed and charged.
  - Check if the device is securely attached or placed in a pocket where movement can be detected.
  - Verify that personal settings (stride length, height) are correctly entered.
• Bildschirm ist leer oder dunkel:
  - Replace the battery.
  - Ensure the battery is inserted with correct polarity.
• Ungenaue Messwerte:
  - Re-enter your personal settings (height, weight, stride length).
  - Ensure the pedometer is not subjected to excessive shaking or vibrations that are not related to walking.
• Tasten reagieren nicht:
  - Try removing and reinserting the battery to perform a soft reset.
  - Ensure the buttons are not obstructed.

Technische Daten

Garantie und Support

Informationen zur Garantie und zum Kundendienst finden Sie in der mit Ihrem Kauf gelieferten Dokumentation oder auf der offiziellen Crivit-Website. webBewahren Sie Ihren Kaufbeleg für eventuelle Garantieansprüche auf.