Monitor Audio Bronze W10 6G Series Subwoofer Bedienungsanleitung

1. Einleitung

Vielen Dank für Ihren Einkauf.asing the Monitor Audio Bronze W10 6G Series Subwoofer. This manual provides essential information for the safe and optimal operation of your new subwoofer. Please read these instructions thoroughly before installation and use, and retain them for future reference.

2. Sicherheitshinweise

Beachten Sie stets die folgenden Sicherheitsvorkehrungen, um Stromschläge, Brände oder Schäden am Gerät zu vermeiden:

• Setzen Sie das Gerät weder Regen noch Feuchtigkeit aus.
• Öffnen Sie nicht das casing. Alle Wartungsarbeiten sind qualifiziertem Personal zu überlassen.
• Sorgen Sie für ausreichende Belüftung. Blockieren Sie keine Belüftungsöffnungen.
• Ziehen Sie den Netzstecker aus der Steckdose, wenn das Gerät längere Zeit nicht benutzt wird.
• Verwenden Sie ausschließlich das mitgelieferte oder vom Hersteller angegebene Netzkabel.
• Vermeiden Sie es, das Gerät in der Nähe von Wärmequellen oder in direktem Sonnenlicht aufzustellen.

3. Packungsinhalt

Prüfen Sie, ob alle Artikel in der Verpackung vorhanden sind:

• Monitor Audio Bronze W10 6G Series Subwoofer
• Netzkabel
• Benutzerhandbuch (dieses Dokument)

4. Produktüberschreitungview

4.1 Hauptmerkmale

• Long-throw 10" driver featuring 'dished' C-CAM cone for powerful bass.
• 10" flat panel Auxiliary Bass Radiator (ABR) positioned underneath the unit for enhanced low-frequency extension.
• Klasse D amplifier with high current Switch Mode Power Supply (SMPSU) for efficient power delivery.
• Amplifier Output: 220 Watts RMS.
• Power Consumption: Maximum 300 W, Standby <0.5 W (ErP compliance).

4.2 Subwoofer-Komponenten

Abbildung 4.2.1: Vorderseite View of the Monitor Audio Bronze W10 Subwoofer. This image displays the front of the subwoofer with its protective grille, showcasing the compact and elegant design.

Abbildung 4.2.2: Schräg View of the Monitor Audio Bronze W10 Subwoofer. This image provides an angled perspective, highlighting the overall form factor and the four sturdy feet.

Figure 4.2.3: Rear Panel of the Monitor Audio Bronze W10 Subwoofer. This image details the rear panel, showing all input/output connections, control knobs for frequency, volume, and phase, and the power switch.

5. Einrichtung

5.1 Platzierung

Optimal placement of the subwoofer is crucial for sound quality. Experiment with different positions in your listening room. Generally, placing the subwoofer in a corner can enhance bass output, while placing it along a wall can provide a more balanced response. Avoid placing it directly against a wall if possible, as this can lead to boomy bass.

5.2 Anschlüsse

1. Audioeingang: Schließen Sie den Subwoofer an Ihren AV-Receiver an oder amplifier's LFE (Low-Frequency Effects) or Subwoofer output using an RCA cable. The Bronze W10 features both LFE and stereo RCA inputs.
2. Stromanschluss: Ensure the subwoofer's power switch is in the 'Off' position. Connect the supplied power cord to the subwoofer's AC inlet and then to a suitable wall outlet. The unit supports AC 110-120V or 220-240V, selectable via a switch on the rear panel.
3. 12V-Trigger (optional): If your AV receiver or amplifier has a 12V trigger output, connect it to the subwoofer's 12V Trigger input. This allows the subwoofer to power on/off automatically with your main system.

5.3 Erstes Einschalten

After making all connections, switch the subwoofer's power to 'On'. The power indicator light should illuminate. If using the 12V trigger, ensure your main system is powered on.

6. Bedienungsanleitung

6.1 Bedienelemente

The rear panel of the Bronze W10 features several controls for fine-tuning its performance:

• Volumen: Adjusts the overall output level of the subwoofer. Start with a low setting and gradually increase until it blends seamlessly with your main speakers.
• Frequenz (Übergangsfrequenz): Sets the upper frequency limit for the subwoofer. This should typically be set to match the low-frequency extension of your main speakers. Common settings range from 80Hz to 120Hz.
• Phase: Allows you to adjust the phase of the subwoofer's output relative to your main speakers (0° or 180°). This helps ensure that the subwoofer's sound waves are in sync with the main speakers, preventing cancellation or reinforcement at the crossover point. Experiment with both settings to find the one that produces the most coherent bass.
• Modus: Selects the power mode (On, Auto, 12V Trigger). 'Auto' mode will put the subwoofer into standby when no audio signal is detected and power it on when a signal is present.
• Bassmodus: (Refer to Figure 4.2.3) This switch allows selection between different bass characteristics, such as 'Music' or 'Movie' modes, or a 'Bass Boost' setting, to optimize performance for various content.

6.2 Drahtlose Konnektivität (Bluetooth)

The Bronze W10 features Bluetooth connectivity for wireless control or audio input (check specific model features for audio input capability). Refer to your source device's manual for pairing instructions. The Bluetooth range is approximately 10 meters.

7. Wartung

7.1 Reinigung

To clean the subwoofer, use a soft, dry, lint-free cloth. Do not use abrasive cleaners, waxes, or solvents, as these can damage the finish. For stubborn marks, a slightly damp Man kann ein Tuch verwenden und anschließend mit einem trockenen Tuch nachwischen.

7.2 Pflege

• Avoid exposing the subwoofer to extreme temperatures or humidity.
• Stellen Sie keine schweren Gegenstände auf das Gerät.
• Sorgen Sie für eine ausreichende Luftzirkulation um das Gerät, um eine Überhitzung zu vermeiden.

8. Fehlerbehebung

9. Spezifikationen

10. Garantieinformationen

Monitor Audio products are designed and manufactured to the highest quality standards. This product is covered by a Limited Warranty. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official Monitor Audio webBitte bewahren Sie Ihren Kaufbeleg für Garantieansprüche auf.

11. Unterstützung

For further assistance, technical support, or service inquiries, please contact your authorized Monitor Audio dealer or visit the official Monitor Audio webWebsite:

WebWebsite: www.monitoraudio.com

Address: Monitor Audio Ltd, 24 Brook Road, Rayleigh, Essex, SS6 7XJ, United Kingdom