Logilink UA0363

LogiLink UA0363 USB-C to 3.5mm Audio Adapter with Equalizer User Manual

Modell: UA0363

1. Einleitung

The LogiLink UA0363 is a USB-C to 3.5mm audio adapter designed to provide audio output for smartphones, tablets, and laptops that lack a dedicated 3.5mm audio jack. This adapter integrates a high-quality Digital-to-Analog Converter (DAC) and a hardware equalizer to deliver enhanced audio performance. It supports standard 3.5mm headphones and headsets with microphone functionality.

2. Produktmerkmale

  • Supports most mobile phones and laptops with a USB-C interface.
  • Integrated 3-level hardware equalizer (EQ), selectable via a control button.
  • Integrated microphone support.
  • LED display for sampling rate and EQ modes.
  • Supports most 3.5mm 3-pin headphones with 16-600 ohms impedance.
  • Kopfhörer Amplifier: Maxim MAX97220AA.
  • DAC: BES Technik BES3100.
  • Unterstütztampling frequencies of 44, 48, and 96 kHz with 24-bit resolution.
  • USB powered, no external power supply required.
  • Compliant with USB 2.0 specifications.
  • Signal-to-Noise Ratio (SNR): Approximately 100 dB (A).

3. Einrichtung

  1. Connect the LogiLink UA0363 adapter to the USB-C port of your smartphone, tablet, or laptop. Ensure it is fully inserted.
  2. Plug your 3.5mm headphones or headset into the 3.5mm jack on the adapter.
  3. The device is plug-and-play and should be recognized automatically by most operating systems.
LogiLink UA0363 adapter connected to a smartphone with a 3.5mm headphone jack inserted.

Image: The LogiLink UA0363 adapter connected to a smartphone, ready for headphone use.

4. Bedienungsanleitung

4.1 Grundlegende Audiowiedergabe

Once connected, audio from your device will be routed through the UA0363 adapter to your headphones. Use your connected device's volume controls to adjust the audio output level.

4.2 Equalizer (EQ) Function

The adapter features a built-in 3-level hardware equalizer. To cycle through the available EQ modes, press the control button located on the adapter. An LED display on the adapter indicates the currently active EQ mode and the sampling-Rate.

Close-up of the LogiLink UA0363 adapter showing LED indicators for sampling rates (44, 48, 96 kHz) and EQ modes.

Bild: Detailliert view of the adapter's indicators for sampling frequency and equalizer settings.

4.3 Mikrofonfunktion

If your connected headphones or headset include a microphone, its functionality will be supported through the UA0363 adapter. Ensure your device's audio input settings are configured to use the USB audio device's microphone.

5. Wartung

  • Keep the adapter clean and dry. Use a soft, dry cloth for cleaning.
  • Setzen Sie den Adapter keinen extremen Temperaturen, hoher Luftfeuchtigkeit oder direkter Sonneneinstrahlung aus.
  • Versuchen Sie nicht, den Adapter zu zerlegen oder zu verändern, da dies zum Erlöschen der Garantie führt.
  • Bewahren Sie den Adapter bei Nichtgebrauch an einem sicheren Ort auf, um Beschädigungen zu vermeiden.

6. Fehlerbehebung

6.1 Keine Tonausgabe

  • Ensure the UA0363 adapter is fully and securely inserted into your device's USB-C port.
  • Verify that your headphones are fully plugged into the adapter's 3.5mm jack.
  • Check your device's audio output settings to confirm that the USB audio device is selected as the primary output.
  • Test the adapter with a different pair of headphones or another compatible USB-C device to isolate the issue.
  • Stellen Sie sicher, dass die Lautstärke Ihres angeschlossenen Geräts nicht stummgeschaltet oder zu niedrig eingestellt ist.

6.2 Poor Audio Quality or Distortion

  • Stellen Sie sicher, dass die Audioquelle (z. B. Musik) file(Streaming-Dienst) ist von hoher Qualität.
  • Try cycling through the different EQ settings on the adapter to see if a different profile improves the sound.
  • Check for any loose connections between the adapter, device, and headphones.
  • Avoid using the adapter near sources of strong electromagnetic interference.

6.3 Mikrofon funktioniert nicht

  • Confirm that your headphones or headset are equipped with a working microphone.
  • Check your device's audio input settings to ensure the USB audio device's microphone is selected as the input source.
  • Ensure the microphone on your headset is not muted.

7. Spezifikationen

BesonderheitSpezifikation
ModellnummerUA0363
AnschlüsseUSB-C Male, 3.5mm Jack Female
DAC-ChipBES Technik BES3100
Kopfhörer AmpschwererMaxim MAX97220AA
Unterstützte Sampling Preise44 kHz, 48 kHz, 96 kHz
Auflösung24-Bit
Impedance Support16-600 Ohm
Signal-Rausch-Verhältnis (SNR)Ca. 100 dB (A)
StromquelleStromversorgung über USB
USB-KonformitätUSB 2.0
Besondere MerkmaleIntegrated Microphone Support, 3-level Hardware Equalizer, LED Indicators
Abmessungen (L x B x H)17 x 10 x 26 mm
FarbeSchwarz

8. Garantie und Support

For warranty information, technical support, and further assistance, please refer to the official LogiLink website or contact your authorized retailer. Keep your purchase receipt for warranty claims.

© 2024 LogiLink. Alle Rechte vorbehalten.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.