Einführung
This manual provides essential information for the safe assembly, operation, and maintenance of your Intex 10 ft x 30 in Beachside Metal Frame Pool Set. Please read all instructions carefully before setting up and using the pool. Retain this manual for future reference.
Image: A family enjoying the Intex 10 ft x 30 in Beachside Metal Frame Pool Set in a backyard. The pool features a blue liner with a beachside print.
Sicherheitshinweise
Always supervise children in and around the pool. Drowning can occur quickly and silently. Ensure all users understand basic pool safety rules. Do not dive or jump into the pool. The pool is not designed for diving. Keep electrical devices away from the pool area. Always use ground fault circuit interrupters (GFCI) for all electrical equipment connected to the pool.
- Lassen Sie Kinder niemals unbeaufsichtigt.
- No diving or jumping.
- Keep electrical devices away from water.
- Ensure proper fencing or barriers are in place according to local regulations.
Packungsinhalt
Verify that all components are present before beginning assembly. If any parts are missing or damaged, do not proceed with assembly and contact Intex customer service.
- Pool Liner (with Beachside print)
- Metal Frame Components (horizontal beams, vertical legs, pins)
- Filter Pump (as shown in images)
- Schläuche und Clamps für Filterpumpe
- Bedienungsanleitung
Image: A gray Intex filter pump with white hoses and clamps, a common accessory for maintaining pool water clarity.
Standortvorbereitung
Proper site preparation is crucial for the stability and longevity of your pool. Choose a level, solid surface free from sharp objects, debris, or excessive slopes. The area should be large enough to accommodate the pool and provide adequate space around it for safe access.
- Ebenes Gelände: The pool must be placed on perfectly level ground. An uneven surface can cause the pool to collapse, leading to serious injury or property damage.
- Freier Bereich: Remove all rocks, sticks, roots, and other sharp objects.
- Drainage: Ensure the area has good drainage to prevent water accumulation around the pool base.
- Nähe zu Versorgungseinrichtungen: Position the pool near a suitable electrical outlet for the filter pump, ensuring it is GFCI protected.
Montageanleitung
Assembly typically requires two or more adults. Follow these steps carefully:
- Komponenten auspacken: Lay out all pool liner and frame parts on a clean, soft surface to prevent damage.
- Spread Liner: Carefully spread the pool liner on the prepared level ground. Ensure the drain plug is positioned correctly for future draining.
- Horizontale Träger montieren: Insert the horizontal beams through the sleeves at the top edge of the pool liner.
- Connect Vertical Legs: Attach the vertical legs to the horizontal beams using the provided pins. Ensure all connections are secure.
- Bilden Sie den Rahmen: Continue connecting all frame components until the circular structure is complete and stable.
- Glätten von Falten: Once the frame is assembled, gently pull the liner outwards from the center to remove any wrinkles from the bottom.
Image: An Intex Beachside Metal Frame Pool set up on grass, showcasing the blue liner with a starfish pattern on the bottom.
Filling and Operating
After assembly, the pool is ready for filling and initial operation.
- Mit Wasser füllen: Begin filling the pool with water. As the water level rises, continue to smooth out any remaining wrinkles on the bottom of the liner. Fill the pool to the recommended fill line, typically indicated on the liner or in the manual. Do not overfill.
- Filterpumpe anschließen: Once the pool is partially filled (enough to cover the inlet/outlet fittings), connect the filter pump hoses to the pool's inlet and outlet connections. Ensure all connections are tight and secure to prevent leaks.
- Prime and Start Pump: Follow the filter pump's specific instructions for priming and starting. Ensure the pump is operating correctly and circulating water.
- Wasseraufbereitung: Add appropriate pool chemicals (e.g., chlorine, pH adjusters) according to manufacturer instructions and test the water regularly to maintain proper balance and sanitation.
Wartung
Regular maintenance is essential for clean water and extending the life of your pool.
- Wasserchemie: Test water pH and chlorine levels daily. Maintain pH between 7.2-7.6 and chlorine levels between 1-3 ppm.
- Funktionsweise der Filterpumpe: Run the filter pump for at least 4-6 hours daily to ensure proper water circulation and filtration.
- Reinigung/Austausch der Filterpatrone: Clean the filter cartridge every few days by rinsing with a garden hose. Replace the cartridge every 2-4 weeks, or more frequently if the water is heavily used or dirty.
- Abschöpfen und Absaugen: Remove debris from the water surface daily using a skimmer net. Vacuum the pool bottom as needed to remove settled dirt.
- Poolabdeckung: Use a pool cover when the pool is not in use to prevent debris from entering and reduce water evaporation.
Lagerung
At the end of the swimming season, properly store your pool to protect it from damage and prolong its lifespan.
- Drain Pool: Completely drain the pool using the drain plug. Ensure all water is removed.
- Clean Liner: Thoroughly clean the pool liner with mild soap and water. Rinse completely and allow it to air dry. Ensure it is completely dry before folding to prevent mold and mildew.
- Disassemble Frame: Carefully disassemble the metal frame components. Clean and dry all parts.
- Komponenten speichern: Store the liner, frame parts, and filter pump in a dry, cool place, protected from extreme temperatures and pests.
Fehlerbehebung
In diesem Abschnitt finden Sie häufig auftretende Probleme und deren Lösungen.
| Problem | Mögliche Ursache | Lösung |
|---|---|---|
| Trübes Wasser | Insufficient filtration, improper chemical balance, high organic load. | Run filter longer, check/adjust pH and chlorine, shock treat pool, clean/replace filter cartridge. |
| Algenwachstum | Low chlorine, poor circulation, high phosphates. | Shock treat with chlorine, brush pool walls, run filter continuously, add algaecide. |
| Pumpe funktioniert nicht | Power issue, clogged impeller, air in system. | Check power connection/GFCI, clear debris from impeller, prime pump. |
| Wasserleck | Hose connection loose, small puncture in liner. | Schlauchklemme festziehenamps, inspect liner for holes and use a repair patch kit. |
Technische Daten
- Modellnummer: 28208GN
- Pooltyp: Metallrahmenpool
- Form: Runden
- Abmessungen (Durchmesser x Höhe): 10 ft x 30 in (305 cm x 76 cm)
- Material: Durable PVC liner with a galvanized steel frame
- Capacity (at 90% fill): Ungefähr 1,470 Gallonen (5,560 Liter)
- Montage erforderlich: Ja
- Besondere Merkmale: Photorealistic ocean print on liner
Image: A cutaway diagram illustrating the three-ply construction of the Intex pool liner, showing two outer layers of heavy-gauge PVC laminated to an inner layer of polyester mesh for reinforcement.
Garantie und Support
Intex-Produkte werden aus hochwertigen Materialien gefertigt und zeichnen sich durch sorgfältige Verarbeitung aus. Genauere Garantiebedingungen finden Sie auf der Ihrem Produkt beiliegenden Garantiekarte oder auf der offiziellen Intex-Website. website. For technical support, replacement parts, or further assistance, please contact Intex customer service directly. Keep your proof of purchase and model number handy when contacting support.