Cressi Big Eyes Evolution Crystal Scuba Diving Mask User Manual

1. Zu Endeview

The Cressi Big Eyes Evolution Crystal mask is an advanced diving and snorkeling mask designed for enhanced vision and comfort. It features exclusive Crystal Silicone technology, which improves transparency and resists discoloration over time, ensuring a clear view for years. The mask's design, including tilted lenses, significantly widens the field of view, making it suitable for various underwater activities.

Abbildung 1: Vorderseite view of the Cressi Big Eyes Evolution Crystal Scuba Diving Mask. This image shows the clear silicone skirt and the dual lenses.

Abbildung 2: Seite view of the Cressi Big Eyes Evolution Crystal Scuba Diving Mask, highlighting the strap and buckle attachment.

2. Hauptmerkmale

• Crystal Silicone Technology: Exclusive Cressi material that offers superior transparency, minimizes fogging, and prevents yellowing over time, extending the mask's lifespan.
• Erweitertes Feld von View: Inclined and inverted tear-drop lenses widen the downward and lateral field of view by approximately 30%.
• Low Internal Volume: Reduces the need for frequent equalization, enhancing comfort during dives.
• Integrated Buckles: Easy-to-use, patented swivel buckles integrated into the frame allow for quick and precise strap length adjustment.
• Linsen aus gehärtetem Glas: Durable and safe for diving and snorkeling.

3. Packungsinhalt

Prüfen Sie nach dem Öffnen der Verpackung, ob alle Komponenten vorhanden und unbeschädigt sind:

• Cressi Big Eyes Evolution Crystal Scuba Diving Mask (1 unit)

4. Einrichtung und Justierung

4.1 Erste Vorbereitung

Before first use, it is recommended to clean the lenses to remove any manufacturing residue that may cause fogging. Apply a small amount of non-abrasive toothpaste or a commercial mask defogger to the inside of the lenses, rub gently, and rinse thoroughly with fresh water. Repeat if necessary.

4.2 Riemenverstellung

The mask features integrated, flexible buckles for easy strap adjustment. To adjust the strap:

1. Place the mask gently on your face without the strap around your head.
2. Hold the mask in place and pull the strap over your head.
3. Use the buckles on each side of the mask to tighten or loosen the strap. Press the release buttons on the buckles to adjust the strap length.
4. Adjust until the mask feels secure but not uncomfortably tight. Overtightening can cause leaks and discomfort.

Figure 3: Detail of the integrated buckle system for strap adjustment. The flexible buckles allow for precise fitting.

4.3 Fit Test

To check for a proper seal:

1. Place the mask on your face without using the strap.
2. Inhale gently through your nose. The mask should suction to your face and stay in place without holding it.
3. If air leaks in, adjust the mask's position or the strap tension until a good seal is achieved. Ensure no hair is caught under the silicone skirt.

5. Bedienungsanleitung

5.1 Donning the Mask

After adjusting the strap, place the mask over your eyes and nose, ensuring the silicone skirt forms a complete seal around your face. The strap should rest comfortably around the back of your head, above your ears.

5.2 Mask Clearing

If water enters the mask, it can be cleared underwater:

1. Press the top of the mask frame firmly against your forehead.
2. Exhale slowly and steadily through your nose. The exhaled air will push the water out from the bottom of the mask.
3. Continue exhaling until all water has been expelled.

5.3 Ausgleich

As you descend, pressure builds up in the mask. To equalize this pressure and prevent discomfort, gently pinch your nose through the mask's nose pocket and blow gently through your nose. This equalizes the pressure in your ears and sinuses with the surrounding water pressure.

6. Wartung

6.1 Nach jeder Verwendung

Rinse your mask thoroughly with fresh, clean water immediately after each use. This removes salt, chlorine, and other residues that can degrade the silicone and lenses over time. Avoid using harsh chemicals or abrasive materials.

6.2 Speicherung

Store the mask in a cool, dry place away from direct sunlight and extreme temperatures. Prolonged exposure to UV light can cause the silicone to yellow or become brittle. Store it in its original case or a protective container to prevent scratches to the lenses.

6.3 Tiefenreinigung

Periodically, if the mask shows signs of stubborn residue or persistent fogging, a deeper clean may be necessary. Use a mild soap solution (e.g., baby shampoo) and soft cloth to gently clean the silicone skirt and lenses. Rinse thoroughly afterwards.

7. Fehlerbehebung

7.1 Mask Leaks

• Ursache: Hair caught under the skirt. Lösung: Ensure all hair is clear of the mask skirt before donning.
• Ursache: Overtightened strap. Lösung: Loosen the strap. A mask should seal with minimal strap tension.
• Ursache: Passt nicht richtig. Lösung: Re-adjust the mask's position on your face. Perform a dry fit test (Section 4.3).
• Ursache: Facial hair (mustache). Lösung: Apply a thin layer of silicone grease or petroleum jelly to the area where the skirt meets the facial hair to improve the seal.

7.2 Mask Fogging

• Ursache: New mask residue. Lösung: Perform initial preparation cleaning (Section 4.1) thoroughly.
• Ursache: Temperaturdifferenz. Lösung: Use an anti-fog solution or saliva rubbed on the inside of the lenses before each use. Rinse lightly.

8. Spezifikationen

Figure 4: Cressi Big Eyes Evolution Crystal Mask size chart, providing dimensions for mask fit reference.

9. Garantie und Support

The Cressi Big Eyes Evolution Crystal Scuba Diving Mask is covered by a 2 Jahr eingeschränkte Garantie Diese Garantie gilt ab Kaufdatum und deckt Herstellungsfehler und Materialmängel bei normalem Gebrauch ab.

For warranty claims, technical support, or additional product information, please visit the official Cressi webBesuchen Sie die Website oder kontaktieren Sie den Kundendienst. Bewahren Sie Ihren Kaufbeleg zur Überprüfung der Garantie auf.

Cressi Official WebWebsite: www.cressi.com