1. Einleitung
Thank you for choosing the LEPOTEC 30-LED Motion Sensor Cabinet Light. This manual provides detailed instructions for the proper installation, operation, and maintenance of your new lighting product. Please read this manual thoroughly before use and retain it for future reference.
Packungsinhalt:
- LEPOTEC 30-LED Motion Sensor Cabinet Light (2 units)
- USB-Ladekabel
- Adhesive Magnetic Strips
- Bedienungsanleitung
2. Produktmerkmale
- Fortschrittliche LED-Technologie: Features 30 side-emitting LED lamp beads for bright (up to 200 lumens) yet soft, non-glare illumination. Constructed from durable aluminum alloy.
- Einfache Installation: Built-in magnet allows direct attachment to iron surfaces. For non-iron surfaces, use the included adhesive tape and metal sheet for secure mounting. Lights can be easily removed for charging or relocation.
- Drei Arbeitsmodi: Equipped with a 3-mode switch (ON-OFF-G) for continuous illumination, off, or motion sensor mode.
- USB wiederaufladbar: Integrated 1000mAh high-capacity rechargeable battery, easily charged via the included USB cable. Offers approximately 3 hours of continuous light or 2-4 weeks in motion sensor mode (based on 10 activations per day) on a full charge.
- Breite Anwendung: Suitable for various indoor locations such as closets, cabinets, corridors, workshops, basements, garages, and stairwells.
Image: Two LEPOTEC 30-LED Motion Sensor Cabinet Lights, illustrating the product design.
3. Einrichtung und Installation
The LEPOTEC cabinet light offers flexible installation options due to its magnetic design.
Installationsschritte:
- Direkte magnetische Befestigung: If installing on an iron surface (e.g., refrigerator, metal cabinet), simply place the light directly onto the surface. The built-in magnet will secure it.
- Adhesive Magnetic Strip Installation (for non-iron surfaces):
- Clean the desired installation surface to ensure it is dry and free of dust or grease.
- Peel off the protective film from one side of the adhesive tape and attach it to the metal plate.
- Peel off the protective film from the other side of the adhesive tape and firmly press the metal plate onto the cleaned surface.
- Attach the LEPOTEC cabinet light to the metal plate. The light will magnetically adhere to the plate.
Image: Illustration of the built-in magnet for direct attachment and the adhesive magnetic strip method for non-metal surfaces.
4. Bedienungsanleitung
The LEPOTEC cabinet light features a versatile 3-mode switch and motion sensing capabilities.
Modusauswahl:
Locate the switch on the side of the light bar. Slide the switch to select one of the following modes:
- AUF: Das Licht bleibt dauerhaft eingeschaltet.
- AUS: Das Licht wird ausgeschaltet.
- G (Motion Sensor Mode): In a dark environment, the light will automatically detect human motion within a 10ft/120° range. It will turn on when motion is detected and automatically turn off after 20 seconds of no movement. The motion sensor is designed to activate only in low-light conditions to conserve battery life.
Bild: Detailliert view of the 3-mode switch (G, OFF, ON) and the Type-C charging port.
Image: Explanation of the auto-induction condition, showing the motion sensor activates only in low light (night) and not in bright light (daytime).
5. Wartung
Laden des Akkus:
The light is equipped with a built-in rechargeable battery. When the battery is low, the light output may diminish. To charge:
- Connect the included USB charging cable to the Type-C charging port on the light bar.
- Verbinden Sie das andere Ende des USB-Kabels mit einem Standard-USB-Netzteil (nicht im Lieferumfang enthalten) oder einem USB-Anschluss Ihres Computers.
- Die Ladeanzeigeleuchte leuchtet während des Ladevorgangs rot.
- Sobald der Akku vollständig aufgeladen ist (nach etwa 3 Stunden), leuchtet die Kontrollleuchte grün.
- Trennen Sie das Ladekabel.
Image: Visual representation of the 1000mAh battery, quick charge capability, and charging status indicators (red for charging, green for fully charged).
Reinigung:
To clean the light, gently wipe the surface with a soft, dry cloth. Do not use abrasive cleaners or solvents, as these may damage the finish or electronic components.
6. Fehlerbehebung
If you encounter issues with your LEPOTEC cabinet light, please refer to the following common problems and solutions:
| Problem | Mögliche Ursache | Lösung |
|---|---|---|
| Light does not turn on in 'G' (Motion Sensor) mode. | Insufficient darkness; battery low; sensor obstructed. | Ensure the environment is dark enough for the sensor to activate. Charge the battery. Check if the sensor is clean and unobstructed. |
| Light stays on continuously in 'G' mode or flickers. | Constant motion detected; sensor malfunction; switch issue. | Ensure no continuous motion is within the sensor's range. Try switching to 'OFF' and then back to 'G' mode. If the issue persists, contact customer support. |
| Licht lädt nicht. | Faulty cable; power source issue; charging port damage. | Versuchen Sie es mit einem anderen USB-Kabel und Netzteil. Stellen Sie sicher, dass der Ladeanschluss sauber und unbeschädigt ist. |
| Die Akkulaufzeit ist kürzer als erwartet. | Frequent activation; continuous 'ON' mode usage. | Battery life varies with usage frequency. Reduce activations in 'G' mode or use 'OFF' mode when not needed. Ensure the light is fully charged. |
7. Spezifikationen
| Besonderheit | Detail |
|---|---|
| Marke | LEPOTEC |
| Modellnummer | TL030-2 |
| Lichtquelle | 30 LED-Perlen |
| Lichtfarbe | Weißes Licht |
| Helligkeit | 200 Lumen |
| Wastage | 2 Watt |
| Bandtage | 3.7 Volt |
| Batteriekapazität | 1000 mAh Lithium-Polymer |
| Ladezeit | Ca. 3 Stunden |
| Reichweite des Bewegungssensors | 10 Fuß / 120° |
| Auto-Off-Zeit | 20 seconds (after no motion in 'G' mode) |
| Material | Aluminium, Eisen |
| Technische Daten | 8.2"L x 3.5"W x 0.6"H (7.8 inch length for the light bar itself) |
| Artikelgewicht | 9.12 Unzen |
| Installationstyp | Magnetic, Adhesive Mount |
| Verwendung im Innen- und Außenbereich | Innenbereich |
8. Garantie und Support
LEPOTEC is committed to providing high-quality products. For any questions, concerns, or technical support regarding your LEPOTEC 30-LED Motion Sensor Cabinet Light, please contact our customer service team.
Bitte konsultieren Sie Ihre Kaufunterlagen oder die des Händlers. webFür detaillierte Garantieinformationen und Kontaktangaben besuchen Sie bitte die entsprechende Webseite.