Einführung
This manual provides essential information for the safe and efficient operation of your APC Back-UPS Pro Gaming UPS, model BGM1500B. This Uninterruptible Power Supply (UPS) is designed to protect your gaming console, PC, and other electronic equipment from power outagSpannungen, Spannungsspitzen undtage fluctuations, ensuring continuous power and data integrity.
Sicherheitshinweise
Read these instructions carefully before installing or operating the unit. Save this manual for future reference.
- Elektrische Sicherheit: Schließen Sie die USV nur an eine geerdete Steckdose an. Entfernen Sie den Erdungsstift nicht.
- Batteriesicherheit: The battery is user-replaceable. Refer to the maintenance section for proper replacement procedures. Do not dispose of batteries in a fire; they may explode.
- Platzierung: Install the UPS indoors in a protected area, away from excessive moisture, heat, or conductive contaminants. Ensure adequate airflow around the unit.
- Überlast: Do not overload the UPS. Ensure the total power draw of connected equipment does not exceed the UPS's capacity (900W).
Packungsinhalt
Überprüfen Sie, ob Ihr Paket die folgenden Artikel enthält:
- APC Back-UPS Pro Gaming UPS (Model BGM1500B)
- USB-Kommunikationskabel
- Koaxialkabel
- Benutzerhandbuch und Sicherheitsinformationen
Produkteigenschaften
The APC Back-UPS Pro Gaming UPS BGM1500B offers advanced features for power protection and convenience:
- 1500VA / 900W Sine Wave Output: Provides clean and stable power, ideal for sensitive electronics and Active PFC power supplies.
- Interaktives LCD-Display: Features a Reactor Circle that changes color to indicate power status, surges, dips, and remaining battery power.
- Customizable RGB Ambient LED Lighting: Personalize the look of your UPS to match your gaming setup.
- 10 Total Outlets: Includes 6 battery backup outlets and 4 surge-only outlets for comprehensive protection.
- 3 USB-Ladeanschlüsse: Two Type-A and one Type-C port (5V/3A shared) for convenient device charging.
- Automatische Lautstärketage Verordnung (AVR): Corrects high and low voltage fluctuations without using battery power, preserving battery life.
- Surge-Protected Dataline Ports: 1 Gb dataline ports and gold-plated co-axial ports protect network and cable connections.
- Hot-Swappable, User-Replaceable Battery: Allows for easy battery replacement without powering down connected equipment.
Abbildung 1: Vorderseite view of the APC Back-UPS Pro Gaming UPS BGM1500B, showcasing the interactive LCD display and overall design.
Video 1: An official video from APC highlighting the key features and benefits of the APC Back-UPS Pro Gaming UPS.
Aufstellen
1. Batterieanschluss
The UPS is shipped with the battery disconnected for safety. Before use, you must connect the internal battery.
- Stellen Sie die USV auf eine stabile Oberfläche.
- Locate the battery access panel, typically on the side or bottom of the unit.
- Entfernen Sie die Abdeckung, um an das Batteriefach zu gelangen.
- Connect the red battery cable to the red terminal. Ensure a secure connection.
- Replace the battery access panel.
2. Platzierung
Choose a suitable location for your UPS:
- Avoid direct sunlight, heat sources, and areas with high humidity.
- Ensure proper ventilation by keeping at least 1 inch (2.5 cm) of space around the unit.
- Stellen Sie die USV auf eine ebene, stabile Oberfläche.
3. Geräte anschließen
Connect your devices to the appropriate outlets on the rear of the UPS.
Figure 2: Rear panel of the UPS, illustrating the battery backup and surge-only outlets, data ports, and circuit breaker.
- Battery Backup + Surge Protected Outlets: These 6 outlets provide power from the battery during outages and protect against surges. Connect your critical equipment such as your gaming PC, console, monitor, and external hard drives here.
- Steckdosen nur für Überspannungsschutz: These 4 outlets provide surge protection but no battery backup. Connect less critical devices like printers, speakers, or lampes ist hier.
- USB-Ladeanschlüsse: Use the two USB-A and one USB-C ports on the side of the unit to charge mobile devices, controllers, or other USB-powered accessories.
- Dataline Protection: Connect your network cable (RJ45) and coaxial cable to the respective IN and OUT ports for surge protection on your data lines.
4. Erstes Aufladen
After connecting the battery and plugging the UPS into a wall outlet, allow the unit to charge for at least 16 hours before connecting any equipment. This ensures the battery is fully charged and ready to provide maximum runtime.
5. PowerChute Personal Edition Software (Optional)
For advanced monitoring and management features, install the PowerChute Personal Edition software on your PC. Connect the UPS to your computer using the provided USB communication cable. The software allows you to:
- Monitor power events and energy consumption.
- Configure alarms and notifications.
- Perform automatic and safe shutdown of your computer during extended power outages.
Betrieb der USV
1. Ein-/Ausschalten
- So schalten Sie das Gerät ein: Press the power button located on the top panel. The LCD display will illuminate.
- So schalten Sie das Gerät aus: Press and hold the power button until the unit powers down.
2. LCD Display and Reactor Circle
Abbildung 3: Oben view of the UPS, highlighting the LCD display and control buttons for easy interaction.
The interactive LCD display provides real-time information about the UPS status. The Reactor Circle around the display changes color to indicate different operational states:
- Grün: Normal operation, providing power.
- Gelb/Orange: Warning, indicating a power event (e.g., voltage fluctuation) or low battery.
- Rot: Critical alert, indicating a significant issue or very low battery.
Use the navigation buttons next to the LCD to cycle through various display screens, showing information such as input/output voltage, Lastprozenttage, Batterieladestand und geschätzte Laufzeit.
3. Anpassbare RGB-Beleuchtung
The ambient LED lighting can be customized to match your preference. Refer to the specific controls on the unit or the PowerChute software for options to change colors and lighting effects.
4. USB aufladen
Abbildung 4: Seite view of the UPS, showing the convenient USB-A and USB-C charging ports.
The USB ports provide 5V/3A shared power for charging devices. These ports are always active when the UPS is powered on, regardless of battery backup status.
Wartung
1. Batteriewechsel
The battery in your UPS has an average life of 4 years. When the battery needs replacement, the UPS will indicate this on the LCD display. The replacement battery part number is APCRBC163.
- Ensure the UPS is powered off and disconnected from the wall outlet.
- Remove the battery access panel.
- Disconnect the battery cables (black first, then red).
- Carefully slide out the old battery.
- Insert the new battery (APCRBC163).
- Connect the battery cables (red first, then black).
- Replace the battery access panel.
- Recycle the old battery responsibly.
2. Reinigung
Reinigen Sie die Außenseite der USV regelmäßig mit einem weichen, trockenen Tuch. Verwenden Sie keine flüssigen Reiniger oder Lösungsmittel. Stellen Sie sicher, dass die Lüftungsöffnungen frei von Staub und Schmutz sind.
Fehlerbehebung
Sollten Sie Probleme mit Ihrer USV haben, beachten Sie bitte die folgenden häufig auftretenden Probleme und Lösungen:
| Problem | Mögliche Ursache | Lösung |
|---|---|---|
| Die USV schaltet sich nicht ein. | Battery not connected or low charge | Ensure battery cables are securely connected. Charge the UPS for 16 hours. |
| Die UPS piept häufig. | On battery power, low battery, or overload | Check utility power. Reduce connected load. Allow battery to recharge. |
| LCD shows 'Overload' | Too many devices connected to battery backup outlets | Nicht benötigte Geräte sollten von den Notstromanschlüssen getrennt werden. |
| Building Wiring Fault indicator is lit | Wiring problem in the wall outlet | Lassen Sie die Gebäudeverkabelung von einem qualifizierten Elektriker überprüfen. |
Technische Daten
Key technical specifications for the APC Back-UPS Pro Gaming UPS BGM1500B:
- Modell: BGM1500B
- Kapazität: 1500 VA / 900 W.
- Eingangslautstärketage: 120 Volt
- Ausgangsvolumentage: 120 Volt
- Wellenform: Sinus
- Akku-Typ: Versiegelte Blei-Säure
- Akkuladezeit: 16 Stunden
- Durchschnittliche Batterielebensdauer: 4 Jahre
- Überspannungsschutzbewertung: 1080 Joule
- Anzahl der Verkaufsstellen: 10 (6 Battery Backup + Surge, 4 Surge Only)
- USB-Ladeanschlüsse: 2x Type-A, 1x Type-C (5V/3A shared)
- Abmessungen (T x B x H): 16.06" x 4.13" x 11.45" (40.8 cm x 10.5 cm x 29.1 cm)
- Gewicht: 25.35 kg
- Betriebstemperatur: 32 °C bis 104 °C (0 °F bis 40 °F)
- Zertifizierungen: Energie-Star
Garantie und Support
This APC Back-UPS Pro Gaming UPS BGM1500B comes with a 3 Jahr Herstellergarantie. For warranty claims, technical support, or further assistance, please contact APC customer service or visit the official APC website. Ensure you have your product model number and serial number available when contacting support.
For the most up-to-date support information and resources, please visit: www.apc.com/support