Vive EMS Muscle Stimulator RHB2026GRY User Manual

1. Einleitung

The Vive EMS Muscle Stimulator (Model RHB2026GRY) is a versatile 3-in-1 device designed for Transcutaneous Electrical Nerve Stimulation (TENS), Electrical Muscle Stimulation (EMS), and Massage therapy. This non-invasive device provides temporary relief for sore, aching muscles by stimulating nerves and muscles. It is intended for use in managing various conditions such as overuse, tendonitis, sciatica, carpal tunnel, bursitis, and plantar fasciitis, by targeting pain, reducing inflammation, and promoting natural healing.

This manual provides essential information for the safe and effective operation of your Vive EMS Muscle Stimulator. Please read it thoroughly before first use and retain it for future reference.

Vive EMS Muscle Stimulator device with electrode pads attached to a person's arm and leg

Image 1.1: Vive EMS Muscle Stimulator in use, showing electrode pad placement.

2. Sicherheitshinweise und Warnungen

Wichtig: Consult your physician before using this device, especially if you have pre-existing medical conditions.

Nicht verwenden, wenn Sie einen Herzschrittmacher, einen implantierten Defibrillator oder andere metallische oder elektronische Implantate haben.
Nicht verwenden, wenn Sie schwanger sind.
Do not use on areas of skin that are broken, irritated, or have open wounds.
Nicht über den Karotissinusnerven (Vorderseite des Halses), über der Brust oder am Kopf anwenden.
Außerhalb der Reichweite von Kindern aufbewahren.
Die Anwendung sollte abgebrochen werden, wenn Nebenwirkungen wie Hautreizungen, Unwohlsein oder Schwindel auftreten.
Do not operate heavy machinery or drive while using the device.
Use only as directed in this manual. Improper use can lead to injury.

3. Packungsinhalt

Überprüfen Sie, ob alle Artikel in Ihrem Paket vorhanden sind:

Vive EMS Muscle Stimulator Device
4 Square Self-Adhesive Electrode Pads (2"x2")
4 Rectangle Self-Adhesive Electrode Pads (2"x4")
2 Lead Wires
Gürtelclip
3 AAA-Batterien
Benutzerhandbuch (dieses Dokument)

Contents of the Vive EMS Muscle Stimulator package, including the device, electrode pads, belt clip, and AAA batteries.

Image 3.1: Included components of the Vive EMS Muscle Stimulator kit.

4. Produktmerkmale

3-in-1 Therapy: Combines TENS (Targeted Pain Relief), EMS (Muscle Toning), and Massage (Recovery & Relaxation) functions.
22 Modi: 9 TENS modes, 8 EMS modes, and 5 Massage modes for varied treatment options.
40 Intensitätsstufen: Each channel offers 40 adjustable intensity levels for personalized comfort and effectiveness.
A/B Dual Channels: Allows independent control of two separate treatment areas simultaneously with different modes and intensities.
Wiederverwendbare Elektrodenpads: Self-adhesive, pre-gelled pads in two sizes (square and rectangle) for strong conduction and even electrical distribution.
Display mit Hintergrundbeleuchtung: Large, high-resolution display for easy navigation and visibility in low-light conditions.
Kompakt und tragbar: Designed for on-the-go use, includes a belt clip for convenience.
Akkulaufzeit: Up to 25 hours of continuous relief on 3 AAA batteries.

Vive EMS Muscle Stimulator display showing 3 customizable treatments: TENS, EMS, and Massage with their respective modes.

Bild 4.1: Überview of the 3 customizable treatment types and their modes.

A person using the Vive EMS Muscle Stimulator with electrode pads on their arm and thigh, demonstrating independent control of Channel A and Channel B.

Image 4.2: Illustration of A/B Dual Channels for independent control.

5. Einrichtung

Batterien einlegen: Open the battery compartment on the back of the device. Insert 3 AAA batteries, ensuring correct polarity (+/-). Close the compartment securely.
Anschlussdrähte: Plug the lead wires into the output ports (CH1 and CH2) on the top of the device.
Elektrodenpads anbringen: Verbinden Sie die Elektrodenpads mit den Stiften am Ende der Zuleitungen. Achten Sie auf eine sichere Verbindung.
Haut vorbereiten: Clean and dry the skin area where you intend to place the electrode pads. Avoid applying lotions or oils.
Elektrodenpads anbringen: Remove the protective film from the electrode pads and firmly press them onto the desired treatment area. Ensure the pads are flat against the skin and not overlapping.

Close-up of hands applying a reusable electrode pad to skin, with text highlighting features like self-adhesive, residue-free, strong conduction, and even electrical distribution.

Image 5.1: Reusable electrode pads and their features.

6. Bedienungsanleitung

Follow these steps to operate your Vive EMS Muscle Stimulator:

Gerät einschalten: Drücken Sie die ON/OFF/M button to power on the device. The backlit display will illuminate.
Select Treatment Option: Drücken Sie die ON/OFF/M button repeatedly to cycle through the available treatment types: TENS, EMS, or MASSAGE. Once the desired type is selected, press the P button to select a specific program (mode) within that type. There are 22 modes in total.
Intensität anpassen:
- Drücken Sie die CH1 button to activate Channel 1. Use the + Und - buttons on the left side to increase or decrease the intensity for Channel 1.
- Drücken Sie die CH2 button to activate Channel 2. Use the + Und - buttons on the right side to increase or decrease the intensity for Channel 2.
Adjust the intensity gradually to a comfortable level. Do not set the intensity too high, as this may cause discomfort. The device offers 40 intensity levels.
Sitzungsdauer: The device has a default session duration, typically 30 minutes. This timer cannot be adjusted.
Gerät ausschalten: Halten Sie die ON/OFF/M button to turn off the device. Always turn off the device before removing electrode pads.

Diagram showing the steps to turn on the device, select treatment options (TENS, EMS, Massage), and adjust intensity levels.

Image 6.1: Step-by-step guide for operating the device.

Close-up of the Vive EMS Muscle Stimulator's control panel, labeling the Backlit Display, Power/Mode button, Intensity Control buttons, and Dual-Channel buttons.

Image 6.2: Device interface and button functions.

7. Leitfaden zur Elektrodenplatzierung

Proper placement of electrode pads is crucial for effective therapy. Refer to the diagrams below for suggested placement areas for various body parts. Always ensure pads are placed on clean, dry skin and are not overlapping.

Diagrams showing recommended electrode pad placements for various body parts including stiff shoulder, cervical pain, shoulder pain, bicipital tendonitis, stomach pain, abdominal pain, erector spinalis, lower back, hip neuralgia, hip pain, lower leg pain, foot pain, sciatica, slipped disc, knee pain, calf muscle, elbow pain, and carpal tunnel syndrome.

Image 7.1: Recommended electrode pad placements for whole body use.

Notiz: The diagrams illustrate general placement. For specific conditions or if you are unsure, consult a healthcare professional.

8. Wartung und Pflege

Reinigung des Geräts: Wischen Sie das Gerät mit einem weichen, damp Tuch. Verwenden Sie keine Scheuermittel und tauchen Sie das Gerät nicht in Wasser.
Reinigung der Elektrodenpads: Falls die Klebepads ihre Klebekraft verlieren, wischen Sie die Klebefläche vorsichtig mit einem Tuch ab.amp cloth or a drop of water. Allow them to air dry completely before re-applying the protective film.
Lagerung: Store the device and pads in a cool, dry place away from direct sunlight and extreme temperatures. Always re-apply the protective film to the electrode pads after each use to prolong their lifespan.
Batteriewechsel: Replace AAA batteries when the low battery indicator appears on the display or when the device no longer powers on.

9. Fehlerbehebung

Problem	Mögliche Ursache	Lösung
Gerät lässt sich nicht einschalten.	Tote oder falsch eingelegte Batterien.	Batteriepolung prüfen. Durch neue AAA-Batterien ersetzen.
Keine oder nur schwache Empfindung.	Pads not making full contact. Lead wires not connected properly. Intensität zu niedrig eingestellt. Die Klebepads haben ihre Haftkraft verloren.	Achten Sie darauf, dass die Pads fest auf die saubere, trockene Haut gedrückt werden. Check lead wire connections to both device and pads. Increase intensity gradually using the '+' button. Clean pads or replace with new ones if necessary.
Skin irritation under pads.	Allergische Reaktion auf Klebstoff. Pads left on too long. Die Haut darf vor der Anwendung nicht gereinigt sein.	Beenden Sie die Verwendung sofort. Reduce session duration. Ensure skin is clean and dry before applying pads.
Das Display ist dunkel oder flackert.	Niedriger Batteriestand.	AAA-Batterien ersetzen.

10. Spezifikationen

Modellnummer: RHB2026GRY
Energiequelle: 3 x AAA-Batterien
Anzahl der Modi: 22 (TENS, EMS, Massage)
Intensitätsstufen: 40 pro Kanal
Kanäle: Dual (A/B)
Electrode Pad Sizes: 2"x2" (Square), 2"x4" (Rectangle)
Geräteabmessungen: Approximately 5.5" x 3"
Hersteller: Vive Health

11. Garantie und Support

The Vive EMS Muscle Stimulator (Model RHB2026GRY) is backed by a 60 Tage Garantie Diese Garantie gilt ab Kaufdatum und deckt Herstellungsfehler ab. Sie gewährleistet Ihre Zufriedenheit mit dem Produkt.

For warranty claims, technical support, or any questions regarding your device, please contact Vive Health customer service.

Kontaktinformationen: Please refer to the product packaging or the official Vive Health webHier finden Sie die aktuellsten Kontaktdaten des Kundensupports.

A person using the Vive EMS Muscle Stimulator on a couch, with a 'Vive Health 60 Day Guarantee' badge overlaid.

Image 11.1: Vive Health 60-Day Guarantee.

12. Produktvideo beendetview

Watch this official product video for a visual guide on the Vive EMS Muscle Stimulator's features and benefits.

Video 12.1: Offiziell vorbeiview of the Vive EMS Muscle Stimulator, demonstrating its use and key features.

Vive RHB2026GRY