FLEXISPOT EN2 55x28 Electric Height Adjustable Standing Desk Instruction Manual

1. Einleitung

Thank you for choosing the FLEXISPOT EN2 55x28 Electric Height Adjustable Standing Desk. This manual provides essential information for the safe assembly, operation, and maintenance of your new desk. Please read all instructions carefully before use and retain this manual for future reference.

2. Sicherheitshinweise

• Stellen Sie vor der Montage sicher, dass alle Teile vorhanden und unbeschädigt sind.
• Assembly may require two people due to the weight of components.
• Halten Sie Kinder und Haustiere während des Betriebs vom Schreibtisch fern.
• Do not overload the desk. The maximum weight recommendation is 154 pounds (70 kg).
• Ensure all electrical connections are secure and follow local electrical safety standards.
• Vermeiden Sie es, Flüssigkeiten direkt auf das Bedienfeld oder in die Nähe von elektrischen Bauteilen zu bringen.
• Verwenden Sie nur das mitgelieferte Netzteil.
• Do not disassemble or modify the desk's motor or control system.

3. Packungsinhalt

Your FLEXISPOT EN2 desk will arrive in two separate packages. Please verify all components against the packing list before beginning assembly.

• Desktop (55" x 28" White Top)
• Desk Frame (Gray Frame)
• Hubsäulen (Beine)
• Querbalken
• Stützplatten
• Motor
• Control Panel (Keypad)
• Netzteil und Kabel
• Clamp Steckdosenleiste mit 3 AC-Steckdosen und 2 USB-Anschlüssen
• Kabelführungsschale
• Assembly Hardware (screws, hex keys, wrench)
• Bedienungsanleitung

4. Montageanleitung

Please follow these steps carefully. An electric drill (not included) may be required for some steps.

1. Desktop vorbereiten: Lay the desktop upside down on a soft, clean surface to prevent scratches. The packaging includes foam pads that can be used for this purpose.
2. Installieren Sie den Motor: Attach the motor to the right lifting column. Ensure the motor's gear aligns with the column's mechanism and secure it with the provided screws and hex key. Tighten screws gradually and evenly.
3. Attach Lifting Columns to Crossbeam: Connect the lifting columns to the crossbeam. Ensure the orientation is correct as per the manual (e.g., motor side).
4. Montage der Stützplatten: Secure the support plates to the lifting columns using the specified screws.
5. Schreibtischfüße montieren: Attach the desk feet to the bottom of the lifting columns. Ensure they are securely fastened.
6. Antriebsstange einbauen: Insert the transmission rod between the lifting columns, connecting it to the motor. Loosen the nut on the rod if necessary for insertion, then tighten it.
7. Mount the Control Panel (Keypad): Position the control panel on the underside of the desktop, typically on the front right edge for easy access. Secure it with the provided screws.
8. Mount the Cable Management Tray: Assemble the cable management tray by bending it along the perforated lines. Mount it to the underside of the desktop using the provided screws. Ensure the shorter lip faces the back to allow cables to drop in.
9. Verkabelung anschließen: Connect the motor cable, control panel cable, and power adapter to the main control box. Use the provided cable ties and adhesive clips to organize and secure all cables neatly under the desk and within the cable management tray.
10. Cl anhängenamp Steckdosenleiste: Das Clamp power strip can be attached to the back or side of your desk. Adjust the clamp to fit your desktop thickness and secure it in your desired location.
11. Endkontrolle: Ensure all screws are tightened and all cables are securely connected and managed. Carefully flip the desk upright.

5. Bedienungsanleitung

Your FLEXISPOT EN2 desk features an intuitive 6-button digital controller for easy height adjustment and memory presets.

• Auf-/Ab-Tasten (Pfeile): Press the up arrow to raise the desk and the down arrow to lower it. The current height will be displayed on the LED screen.
• Speichervoreinstellungen (1, 2, 3, 4): Your desk can store up to four preferred height settings. To set a memory position:
  1. Stellen Sie den Schreibtisch mithilfe der Auf-/Ab-Pfeile auf die gewünschte Höhe ein.
  2. Drücken Sie die Taste „M“. Im LED-Display erscheint „S-“.
  3. Press the desired number button (1, 2, 3, or 4) within 3 seconds. The height is now saved.
• Antikollisionsfunktion: The desk is equipped with an anti-collision system. If the desk encounters an obstacle during movement, it will stop and reverse slightly to prevent damage. You can adjust the sensitivity of this feature (refer to the full manual for detailed instructions on adjusting sensitivity levels).

6. Funktionen

• Removable Desktop Power Outlet: Equipped with 3 power outlets and 2 USB charging ports, clip it to the back or side of your desk.
• Ampder ganze Schreibtisch: FSC-Certified wood desktop (55" x 28") provides generous space. Hand-measured: ±1" tolerance.
• 4 Memory Buttons: 6-button digital controller with 4 programmable memory presets.
• Motorized Height Adjustment: Smoothly adjusts from 28.1” to 45.7” with a quiet motor (less than 50 dB).
• Langlebige Konstruktion: Industrial-grade steel frame and solid tabletop support up to 176 pounds.
• Kabelmanagement: Integrated cable management device to keep your workspace tidy.

7. Spezifikationen

8. Wartung

• Reinigung: Wischen Sie die Schreibtischoberflächen mit einem Tuch ab.amp Tuch. Vermeiden Sie aggressive Chemikalien, die die Oberfläche beschädigen könnten
• Regelmäßige Kontrollen: Überprüfen Sie regelmäßig alle Schrauben und Bolzen auf festen Sitz. Ziehen Sie sie gegebenenfalls nach.
• Kabelinspektion: Regularly inspect power cords and connections for any signs of wear or damage. Replace immediately if damage is found.

9. Fehlerbehebung

Sollten Sie Probleme mit Ihrem Schreibtisch haben, beachten Sie bitte die folgenden gängigen Lösungsansätze:

• Schreibtisch bewegt sich nicht: Check all cable connections, especially the power adapter and motor cable. Ensure the power outlet is functioning.
• Ungleichmäßige Bewegung/Wackeln: Ensure all assembly screws are tightened evenly. Check if the desk is placed on a level surface. Adjust the leveling feet if necessary.
• Systemsteuerung reagiert nicht: Try resetting the desk. (Refer to the full manual for specific reset procedures, often involves holding down specific buttons until 'RST' appears).
• Antikollisionsmechanismus löst häufig aus: The sensitivity of the anti-collision feature might be too high. Refer to the full manual for instructions on adjusting sensitivity levels.

10. Garantie und Support

Your FLEXISPOT EN2 desk comes with a comprehensive warranty:

• 5 Jahr Garantie: Deckt Rahmen, Motoren und andere mechanische Geräte ab.
• 2 Jahr Garantie: Beinhaltet Steuerungen, Schalter und Elektronik.

For warranty claims, technical support, or any questions not covered in this manual, please contact FLEXISPOT customer service through their official website or the retailer where you purchased the product. Please have your model number (EN2) and proof of purchase ready.