Onforu BDB100D-3
Onforu 100W Dusk to Dawn Outdoor LED Flood Light Instruction Manual
Modell: BDB100D-3
1. Einleitung
This manual provides detailed instructions for the installation, operation, and maintenance of your Onforu 100W Dusk to Dawn Outdoor LED Flood Light. Please read this manual thoroughly before installation and use, and retain it for future reference. This flood light is designed for outdoor use, featuring a photocell sensor for automatic operation and adjustable heads for broad illumination.
Image 1.1: Onforu 100W Dusk to Dawn Outdoor LED Flood Light installed on a house, providing bright illumination.
2. Sicherheitshinweise
WARNUNG: Stromschlaggefahr. Vor Installation oder Wartung die Stromzufuhr an der Sicherung oder dem Leitungsschutzschalter unterbrechen.
- Stellen Sie sicher, dass die Stromversorgung vor der Installation oder Wartung ausgeschaltet ist.
- Die Installation sollte von einem qualifizierten Elektriker gemäß den örtlichen Elektrovorschriften durchgeführt werden.
- Nicht auf Oberflächen montieren, die keine tragfähige Struktur aufweisen.
- Schauen Sie nicht direkt in die eingeschaltete LED-Lichtquelle.
- Halten Sie brennbare Materialien von der Leuchte fern.
- This product is not intended for use with motion sensors.
- This product is not solar powered.
3. Packungsinhalt
Vergewissern Sie sich vor Beginn der Installation, dass alle Komponenten vorhanden sind:
- 1 x Onforu 100W Dusk to Dawn Outdoor LED Flood Light
- 1 x Befestigungswinkel
- 1 x Gummidichtung
- 1 x Black Cap for Photocell (for switch-controlled mode)
- Befestigungsschrauben und Drahtklemmen
- Bedienungsanleitung
Image 3.1: The flood light fixture and included installation hardware.
4. Produktmerkmale
- Hohe Leuchtkraft: 100W LED flood light producing up to 9000 lumens with 154 LEDs.
- Verstellbare Köpfe: Drei lamp heads can be adjusted independently to customize lighting angles and provide a wide light range (up to 120° beam angle).
- Dämmerungssensor: Integrated photocell sensor automatically turns the light on at night (10-20 Lux) and off during the day (30-60 Lux).
- Switch-Controlled Mode: Option to cover the photocell sensor with the included black cap to enable manual control via a wall switch.
- IP65 Wasserdicht: Ensures reliable operation in various weather conditions, including rain, sleet, and snow.
- Effiziente Kühlung: Constructed with high-quality aluminum housing and a fin-type heat sink design for effective heat dissipation, prolonging LED lifespan.
- Energieeinsparung: Advanced high-efficiency LEDs reduce electricity consumption by over 80%.
Image 4.1: The three adjustable lamp heads and the light perception sensor.
Image 4.2: The light demonstrating its IP65 waterproof capability during rainfall.
5. Einrichtung und Installation
This product requires hardwired installation. Ensure power is disconnected before proceeding.
- Verkabelung vorbereiten: Ensure the electrical box is properly installed and the power is off at the circuit breaker.
- Montagehalterung: Attach the mounting bracket to the electrical box using the provided screws. Ensure the rubber gasket is placed between the bracket and the mounting surface for a watertight seal.
- Kabelverbindungen: Connect the light fixture's wires to your household wiring:
- Black wire (Live) to the Live wire.
- Weißer Draht (Neutralleiter) an den Neutralleiter anschließen.
- Grünes Kabel (Erdung) an das Erdungskabel anschließen.
- Vorrichtung anbringen: Align the light fixture with the mounting bracket and secure it with the central screw. Ensure the fixture is flush against the mounting surface.
- Köpfe anpassen: Loosen the screws on the adjustable heads to position them to your desired lighting angles. Tighten the screws to secure the heads.
- Strom wiederherstellen: Schalten Sie den Strom am Leistungsschalter ein.
Image 5.1: Wiring diagram for installation.
Abbildung 5.2: Visuelle Anleitung für den Installationsprozess.
Video 5.1: Official product video demonstrating the installation process and key features of the Onforu 100W Dusk to Dawn LED Flood Light.
6. Bedienungsanleitung
The Onforu 100W Dusk to Dawn Outdoor LED Flood Light offers two operating modes:
6.1. Dämmerungsmodus (Standard)
In this mode, the integrated photocell sensor detects ambient light levels. The light will automatically turn on when the ambient light drops to 10-20 Lux (at dusk) and turn off when the ambient light increases to 30-60 Lux (at dawn).
Image 6.1: The light operating in automatic dusk to dawn mode.
6.2. Schaltergesteuerter Modus
To operate the light manually via a wall switch, cover the photocell sensor with the provided black cap. This will prevent the sensor from detecting ambient light, allowing the light to be controlled solely by the external switch.
Image 6.2: Using the black cap to enable switch-controlled mode.
7. Wartung
- Reinigung: Periodically clean the light fixture and photocell sensor with a soft, damp Für optimale Ergebnisse mit einem Tuch abwischen. Keine Scheuermittel oder Lösungsmittel verwenden.
- Inspektion: Regularly inspect the wiring and mounting for any signs of damage or loosening.
- LED-Ersatz: Die LEDs sind integriert und können vom Benutzer nicht ausgetauscht werden.
8. Fehlerbehebung
| Problem | Mögliche Ursache | Lösung |
|---|---|---|
| Das Licht geht nachts nicht an. | 1. Strom ist ausgeschaltet. 2. Photocell sensor is obstructed or faulty. 3. Verkabelungsproblem. | 1. Überprüfen Sie den Leitungsschutzschalter und den Wandschalter. 2. Ensure photocell is clean and unobstructed. Remove black cap if installed. 3. Verify wiring connections (consult a qualified electrician). |
| Das Licht bleibt tagsüber an. | 1. Photocell sensor is covered or in a dark location. 2. Light from another source is hitting the sensor. 3. Photocell sensor is faulty. | 1. Ensure photocell is exposed to sufficient daylight. Remove black cap if installed. 2. Relocate the light or shield the sensor from other light sources. 3. Wenden Sie sich an den Kundendienst. |
| Licht flackert. | 1. Insufficient light reaching the photocell (borderline lux level). 2. Lose Kabelverbindung. | 1. Use the included black cap to cover the photocell for switch-controlled mode, or ensure the photocell is in a location with clear light/dark distinction. 2. Überprüfen und sichern Sie alle Kabelverbindungen. |
9. Spezifikationen
| Besonderheit | Detail |
|---|---|
| Marke | Onforu |
| Modellnummer | BDB100D-3 |
| Wastage | 100 Watt |
| Helligkeit | 9000 Lumen |
| Farbtemperatur | 6500 Kelvin (Tageslichtweiß) |
| Lichtquelle | LED |
| Anzahl der Lichtquellen | 3 (Adjustable Heads) |
| IP-Schutzart | IP65 (wasserdicht) |
| Stromquelle | Kabelgebundener Strom (110 Volt) |
| Kontrollmethode | Photocell (Dusk to Dawn) or Wall Switch (with cap) |
| Material | Aluminium |
| Artikelabmessungen (L x B x H) | 11 Zoll L x 7 Zoll B x 4 Zoll H |
| Montagetyp | Wall Mount / Eave Mount |
10. Garantie und Support
This product is sold with no stated warranty. For any questions or technical assistance, please refer to the retailer's customer service or the manufacturer's official webSite für Supportoptionen.
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.