SINGER Tailor Deluxe Sewing Machine User Manual

1. Einleitung

Thank you for choosing the SINGER Tailor Deluxe Sewing Machine. This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your new sewing machine. Please read these instructions carefully before use to ensure optimal performance and longevity of your product.

Figure 1: SINGER Tailor Deluxe Sewing Machine with Base and Cover.

2. Produktmerkmale

The SINGER Tailor Deluxe Sewing Machine is designed for reliable stitching with a classic, compact design. Key features include:

• Lever type stitch regulator: Allows for precise control over forward and reverse stitching.
• Flip Open Throat Plate: Provides easy access to the bobbin area.
• Open type shuttle race: Facilitates maintenance and thread management.
• Auto Tripping Spring Loaded Bobbin Winder: Ensures consistent and easy bobbin winding.
• Nickel Plated Needle Bar: Offers durability and smooth needle operation.
• In-built thread cutter: For quick and convenient thread trimming.

Abbildung 2: Nahaufnahme view of the stitch regulator.

3. Einrichtung

Follow these steps to set up your sewing machine:

1. Auspacken: Carefully remove the sewing machine and all accessories from the packaging. Retain the packaging for future storage or transport.
2. Platzierung: Place the machine on a stable, flat surface. Ensure adequate lighting for your work area.
3. Kennenlernen: Identify the main components: needle bar, presser foot, bobbin winder, stitch regulator, and handwheel.
4. Einfädeln der Maschine:
   • Setzen Sie eine Garnrolle auf den Garnrollenstift.
   • Führen Sie den Faden durch die Spannscheiben.
   • Den Aufwickelhebel einfädeln.
   • Pass the thread through the needle bar guides and finally through the eye of the needle from front to back.
5. Aufwickeln der Spule:
   • Setzen Sie eine leere Spule auf die Spulenwickelspindel.
   • Guide the thread from the spool through the bobbin tension disc.
   • Wickeln Sie den Faden einige Male um die Spule.
   • Engage the bobbin winder and turn the handwheel or operate the machine until the bobbin is full. The auto-tripping mechanism will stop winding when full.
6. Einsetzen der Spule:
   • Open the throat plate.
   • Insert the wound bobbin into the shuttle race, ensuring the thread unwinds in the correct direction.
   • Pull the bobbin thread through the tension spring.
   • Close the throat plate.

Abbildung 3: Vorderseite view of the sewing machine, showing threading points.

4. Bedienungsanleitung

Once the machine is threaded and the bobbin is in place, you can begin sewing:

1. Stoff vorbereiten: Place the fabric under the presser foot, aligning the edge with the desired seam allowance.
2. Unterer Nähfuß: Senken Sie den Nähfuß mithilfe des Nähfußhebers ab.
3. Adjust Stitch Length: Use the lever type stitch regulator to select your desired stitch length. Moving the lever up or down adjusts the length, and the central position allows for reverse stitching.
4. Mit dem Nähen beginnen: Slowly turn the handwheel towards you to lower the needle into the fabric. Continue turning the handwheel or use the foot pedal (if applicable) to begin sewing. Guide the fabric gently.
5. Rückwärtsnaht: To secure the beginning and end of a seam, push the stitch regulator lever to the reverse position and sew a few stitches, then return it to the forward position.
6. Finishing a Seam: When you reach the end of your seam, sew a few reverse stitches to secure it. Raise the needle to its highest position, then raise the presser foot. Pull the fabric away from the machine.
7. Cut Thread: Use the in-built thread cutter or a pair of scissors to cut the threads, leaving approximately 4-6 inches of thread tails.

Abbildung 4: Seite view of the sewing machine during operation.

5. Wartung

Regular maintenance ensures your sewing machine operates smoothly and extends its lifespan:

• Reinigung: Regularly remove lint and dust from the bobbin area, feed dogs, and tension discs using a small brush or lint remover.
• Ölen: Refer to the machine's oiling points (usually marked with small holes or indicated in a diagram) and apply a drop of high-quality sewing machine oil as recommended. Do not over-oil.
• Nadelwechsel: Replace the needle frequently, especially when sewing different types of fabric or if it becomes dull or bent. Use only appropriate needle types for your machine.
• Lagerung: When not in use, cover the machine with the provided cover to protect it from dust and damage. Store in a dry, cool place.

6. Fehlerbehebung

Hier sind einige häufige Probleme und ihre Lösungen:

7. Spezifikationen

Detailed specifications for your SINGER Tailor Deluxe Sewing Machine:

• Marke: SINGER
• Modellnummer: Tailor Deluxe Unit Pack
• Farbe: Schwarz
• Material: Eisen
• Produktabmessungen (T x B x H): 48 cm (T) x 32 cm (B) x 24 cm (H)
• Artikelgewicht: 12 Kilogramm
• Energiequelle: Handbedient
• Ist elektrisch: NEIN
• Enthaltene Komponenten: Standardzubehör
• Ursprungsland: Indien

Abbildung 5: Produktabmessungen überview.

8. Garantie und Support

For warranty information, service, or technical support, please contact SINGER India Limited directly:

• Telefon: 18001033474 | 8860118855
• E-Mail: customersupport@singerindia.com
• WebWebsite: www.singerindia.com
• Adresse: Institute for Studies in Industrial Development (ISID), 3rd Floor, Block C-2-3, ISID Campus, 4, Vasant Kunj Institutional Area, New Delhi – 110070, India.

Bitte bewahren Sie Ihren Kaufbeleg als Kaufnachweis für Garantieansprüche auf.