Produkt überview
The AUTGA 1.4W Solar Fountain Water Pump is designed for use in bird baths, small ponds, gardens, and pools. It operates automatically when exposed to sufficient sunlight, providing a water circulation feature without the need for external power or batteries.
Image: The AUTGA 1.4W Solar Fountain Water Pump, a black circular device with solar panels and a central nozzle.
Komponenten
- Solarmodul (integriert)
- Wasserpumpe
- Nozzle Heads (various styles)
- Float Circle
- Anti-collision Poles (straws)
Image: A diagram illustrating the main components of the solar fountain: Nozzle, Float Circle, Solar Panel, and Water Pump, with dimensions indicating a diameter of 16cm / 6.29 inches.
Installationsanweisungen
- Auspacken und prüfen: Nehmen Sie alle Komponenten vorsichtig aus der Verpackung. Vergewissern Sie sich, dass keine Teile fehlen oder beschädigt sind.
- Schutzfolie entfernen: Before initial use, peel off any protective film covering the solar panel surface.
- Düse anbringen: Select your desired nozzle head and firmly attach it to the pump outlet. The fountain comes with 6 different types of nozzle heads to vary the water spray pattern.
- Install Anti-collision Poles (Optional): To prevent the fountain from drifting, locate the four grooves on the back of the fountain. Insert the fasteners into these grooves, then attach the transparent anti-collision poles. These poles help stabilize the fountain in larger water bodies.
Image: A four-step visual guide demonstrating how to attach the anti-collision poles to the solar fountain. Step 1 shows the grooves on the back, Step 2 shows inserting a fastener, Step 3 shows attaching a transparent pole, and Step 4 shows the fountain placed in water with poles extended.
- Ins Wasser legen: Gently place the assembled solar fountain into your bird bath, pond, or pool. Ensure the pump is fully submerged and the solar panel is facing upwards, exposed to direct sunlight. The minimum water depth required for operation is 1.2 inches.
Bedienungsanleitung
The AUTGA Solar Fountain is designed for automatic operation under direct sunlight.
- Sunlight Activation: The pump will start working automatically within 3 seconds when the solar panel receives sufficient direct sunlight.
- Spray Height: Under sunny conditions, the spray height typically ranges from 40-60 cm. In cloudy or faint sunlight, the spray height will be reduced to approximately 10-20 cm.
- No Energy Storage: This solar fountain does not store electrical energy. It operates directly from solar power, meaning it will only function when exposed to sunlight and will stop when sunlight is insufficient or absent.
- Schutz vor Wassermangel: The pump is equipped with water-shortage protection and will stop working if it leaves the water or the water level becomes too low.
Image: A collage showing six different water spray patterns achievable by changing the nozzle heads on the solar fountain.
Image: A comparison of the solar fountain's spray height in cloudy/faint sunlight (10-20cm) versus sunny/direct sunlight (40-60cm), emphasizing the need for a minimum 1.2 inch water depth.
Wartung
Regular maintenance ensures optimal performance and extends the lifespan of your solar fountain.
- Keep Water Clean: Ensure the water in your bird bath or pond is clean. Impurities can clog the pump and filter.
- Clean Filter and Rotor: Regularly clean the filter cotton and rotor. To do this:
- Entfernen Sie die Düse.
- Carefully remove the water pump from the main unit.
- Take out the filter cotton and clean it thoroughly.
- Remove the front cover of the pump to access and clean the rotor.
Image: A three-step visual guide demonstrating how to clean the filter cotton and rotor. Step 1 shows removing the nozzle, Step 2 shows removing the water pump, and Step 3 shows taking out the filter cotton and accessing the rotor for cleaning.
- Transparente Solarzelle: Ensure the solar panel is free from leaves, dirt, or other debris that might block sunlight. A covered panel will prevent the fountain from functioning.
- Wasserstand halten: Do not allow the water level to get too low, as this can cause the pump to stop working and potentially lead to damage.
Fehlerbehebung
If your solar fountain is not working as expected, consider the following common issues:
| Problem | Mögliche Ursache | Lösung |
|---|---|---|
| Fountain does not start or spray weakly | Protective film not removed from solar panel | Entfernen Sie die Schutzfolie vom Solarpanel. |
| Fountain does not start or spray weakly | Unzureichendes Sonnenlicht | Move the fountain to an area with direct and sufficient sunlight. |
| Brunnen funktioniert nicht mehr | Solar panel is covered by leaves or debris | Clean the solar panel surface to ensure full exposure to sunlight. |
| Brunnen funktioniert nicht mehr | Der Wasserstand ist zu niedrig | Add more water to ensure the pump is fully submerged. |
| Schwacher oder ungleichmäßiger Sprühstrahl | Pump or filter is clogged | Clean the pump and filter regularly as described in the Maintenance section. |
Image: A visual guide highlighting four common situations where the solar pump may not work well: protective film not removed, not enough sunshine, solar panel covered, and water level too low.
Technische Daten
- Modell: 1.4W Solar Fountain Water Pump
- Marke: AUTGA
- Energiequelle: Solarbetrieben
- Material: Polyethylenterephthalat
- Produktabmessungen: 6.73 Zoll L x 6.57 Zoll B x 1.73 Zoll H
- Artikelgewicht: 0.25 Kilogramm
- Minimale Wassertiefe: 1.2 Zoll
- Spray Height (Sunny): 40-60 cm
- Spray Height (Cloudy/Faint): 10-20 cm
Garantie und Support
For information regarding product warranty, please refer to the documentation included with your purchase or contact the retailer. For technical support or further assistance, please reach out to the manufacturer or your point of purchase.