BNT 5MP POE Two-Way Audio Security Camera

1. Einleitung

Thank you for choosing the BNT 5MP POE Two-Way Audio Security Camera. This camera is designed to provide high-resolution surveillance with advanced features such as two-way audio communication, motion detection, and night vision. This manual provides essential information for the proper installation, operation, and maintenance of your security camera.

An image of the BNT 5MP POE Two-Way Audio Security Camera, showing its compact design and weatherproof casing.

2. Produktmerkmale

• 5MP Ultra High Resolution: Captures video at 2560x1920 pixels, offering twice the clarity of Full HD (1920x1080P) cameras. The F=3.6MM lens provides a wide field of view with sharp image quality.
• Zwei-Wege-Audiokommunikation: Equipped with a built-in microphone and speaker, enabling real-time two-way conversations via the dedicated smartphone application (Android/iPhone). This feature allows communication with family, visitors, or to deter intruders.
• IP67 Waterproof & Night Vision: Designed with IP67 international standard waterproofing, ensuring reliable operation both indoors and outdoors. The IR-CUT night vision function automatically switches between day and night modes, providing clear visibility up to 30 meters in complete darkness.
• POE Power Supply: Utilizes Power over Ethernet (POE) technology, allowing both power and data transmission through a single Ethernet cable, simplifying installation.
• Aufnahme mit Bewegungserkennung: Features motion sensor technology for automatic recording upon detecting movement, enhancing security monitoring.

3. Einrichtung

1. Packen Sie die Kamera aus: Entnehmen Sie vorsichtig alle Komponenten aus der Verpackung.
2. LAN-Kabelanschluss: Connect the camera to a POE-enabled network switch or NVR using an Ethernet (LAN) cable. Note: A LAN cable is not included with single camera units.
3. Einschalten: Ensure the POE switch/NVR is powered on. The camera will receive power through the Ethernet cable.
4. HDD Formatting (if applicable): If connecting to an NVR with a hard disk drive (HDD), it is crucial to format the HDD vor connecting the camera. Formatting the HDD after the camera is connected may not be possible.
5. App-Installation: Download and install the dedicated mobile application (e.g., "eseecloud" or similar, as specified by the manufacturer) on your Android or iPhone device for remote monitoring and control.
6. Systemkompatibilität: Please note that due to system updates, this camera is not compatible with 5-megapixel camera sets purchased before December 2020.

4. Bedienungsanleitung

• Fernüberwachung: Greifen Sie auf Live-Kamerabilder und aufgezeichnete Inhalte zu.tage from your smartphone or PC using the installed application.
• Zweiwege-Audio: Nutzen Sie die Mikrofon- und Lautsprecherfunktionen der App, um mit Personen in der Nähe der Kamera zu kommunizieren.
• Nachtsichtmodus: The camera automatically switches to IR-CUT night vision mode in low-light conditions.
• Bewegungserkennung: Configure motion detection zones and sensitivity settings through the app to receive alerts and initiate recording when movement is detected.
• Aufnahmewiedergabe: Review recorded video clips stored on your NVR or cloud storage via the mobile application.

5. Wartung

• Reinigung: Reinigen Sie das Kameraobjektiv regelmäßig mit einem weichen, trockenen Tuch, um eine klare Bildqualität zu gewährleisten. Vermeiden Sie die Verwendung aggressiver Chemikalien.
• Kabelinspektion: Periodically check all cable connections for wear, damage, or loose fittings, especially for outdoor installations.
• Software-Updates: Keep the camera firmware and mobile application updated to ensure optimal performance and access to the latest features and security patches.
• Umweltaspekte: Obwohl die Kamera die Schutzart IP67 aufweist, sollten Sie Hochdruckwasserstrahlen nicht direkt auf sie richten. Sorgen Sie für eine ordnungsgemäße Entwässerung im Bereich der Installation.

6. Fehlerbehebung

• No Image/Connection:
  • Ensure the POE switch/NVR is powered on and functioning correctly.
  • Überprüfen Sie die Ethernet-Kabelverbindung an beiden Enden.
  • Verify that the camera is compatible with your existing system (especially if purchased before December 2020).
• Poor Image Quality on Remote Monitoring:
  • Image quality may be reduced during remote viewing via smartphone/PC for bandwidth efficiency. This is normal.
  • Ensure a stable internet connection for both the camera system and your viewgerät.
• Microphone Picks Up Excessive Ambient Noise:
  • The built-in microphone is highly sensitive. Consider adjusting the microphone sensitivity settings in the app if available, or repositioning the camera to minimize unwanted background noise.
• Speaker Sound is Muffled or Low:
  • The speaker output may be low or muffled. When using two-way audio, speak slowly and clearly, pausing between phrases, to ensure your message is understood.
• Probleme mit der Nachtsicht:
  • In areas with streetlights or other ambient light, switching the night vision mode to color (if supported by the app, e.g., eseecloud) may provide a clearer image than infrared black and white.
  • Note that even in color night vision mode, the infrared illuminators may still emit light, potentially revealing the camera's location.
• Aufnahme funktioniert nicht:
  • Ensure the HDD in your NVR is properly formatted (refer to Setup section).
  • Überprüfen Sie die Aufnahmepläne und die Einstellungen zur Bewegungserkennung in der App.

7. Spezifikationen

8. Garantie und Support

For any questions or concerns regarding your BNT 5MP POE Two-Way Audio Security Camera, please do not hesitate to contact our support team. We are here to assist you with setup, operation, or any technical issues you may encounter.

Kontaktinformationen:

• E-Mail: admin@bnt-store.com
• LINE: bnt-mina

Bitte bewahren Sie Ihren Kaufbeleg für Garantiezwecke auf.