Amazon Basics CLL-002
Amazon Basics Class II Cross-Line Laser Level
Model: CLL-002 | Brand: Amazon Basics
Einführung
This manual provides essential information for the safe and effective operation of your Amazon Basics Class II Cross-Line Laser Level. Please read these instructions thoroughly before use and retain them for future reference.
Sicherheitshinweise
WARNING: CLASS II LASER PRODUCT
This device emits a Class II laser beam. Avoid direct eye exposure to the laser beam. Do not stare into the beam. Do not intentionally direct the laser beam at others. Use caution when operating the laser level to prevent accidental exposure.
- Always operate the laser level in a safe manner.
- Versuchen Sie nicht, das Gerät zu modifizieren oder zu zerlegen.
- Außerhalb der Reichweite von Kindern aufbewahren.
- Ensure the work area is clear of obstructions and reflective surfaces that could redirect the laser beam.
Packungsinhalt
- Amazon Basics Class II Cross-Line Laser Level
- L-shaped Magnetic Pivoting Base
- Tragetasche
- Bedienungsanleitung

Produkt überview
The Amazon Basics Cross-Line Laser Level is designed to project bright horizontal, vertical, or cross-line laser beams for various leveling and alignment tasks. Its compact design and versatile mounting options make it suitable for indoor and outdoor use.
Hauptmerkmale:
- Projects horizontal, vertical, and cross-line green laser beams.
- 59-foot (708 inch) range for indoor and outdoor applications.
- Automatic self-leveling mode for quick and accurate setup.
- Manual mode for locking the laser at desired angles.
- Durable plastic and metal construction with a soft rubber exterior for enhanced grip.
- Battery-operated (AA batteries, not included).


Aufstellen
1. Einlegen der Batterie
- Locate the battery compartment on the bottom of the laser level.
- Schieben Sie den Batteriefachdeckel auf.
- Insert two AA batteries (not included), ensuring correct polarity (+/-).
- Schließen Sie den Batteriefachdeckel fest.
2. Montage des Gerätes
The laser level can be used freestanding or mounted using the included L-shaped magnetic pivoting base. The base features a 1/4-inch screw thread for attachment to the laser level and magnets for securing to metallic surfaces. It is also compatible with standard tripods (not included).

Bedienungsanleitung
1. Ein-/Ausschalten
To turn the device on, slide the lock switch on the side to the unlocked position. To turn off, slide the switch to the locked position.
2. Automatic (Self-Leveling) Mode
When the lock switch is in the unlocked position, the laser level will automatically self-level within 4 degrees. If the device is outside this range, the laser lines will blink to indicate it is not level. Adjust the device's position until the laser lines become solid, indicating a level projection.

3. Manueller Modus
To use the laser at a specific angle (e.g., for stair railings), slide the lock switch to the locked position. The laser lines will remain fixed at the angle you set. The lines may blink in manual mode to indicate that the self-leveling feature is disengaged.

4. Laser Line Selection
Press the power button on top of the device to cycle through different laser line modes: horizontal line, vertical line, or cross-line (both horizontal and vertical).


Wartung
- Keep the laser level clean and free of dust and debris. Use a soft, dry cloth for cleaning.
- Bewahren Sie das Gerät bei Nichtgebrauch in der mitgelieferten Tragetasche an einem kühlen, trockenen Ort auf.
- Wenn das Gerät längere Zeit nicht verwendet wird, entfernen Sie die Batterien, um ein Auslaufen zu verhindern.
- Tauchen Sie das Gerät nicht in Wasser und setzen Sie es nicht extremen Temperaturen aus.
Fehlerbehebung
| Problem | Mögliche Ursache | Lösung |
|---|---|---|
| Laser lines are blinking. | In Automatic mode, the device is not level (outside 4-degree range). In Manual mode, blinking is normal. | In Automatic mode, adjust the device's position until the lines become solid. No action needed in Manual mode. |
| No laser lines. | Batteries are dead or incorrectly installed. Device is off. | Check battery polarity and replace if necessary. Ensure the lock switch is in the unlocked position. |
| Laserlinien sind schwach. | Low battery power. Bright ambient light. | Replace batteries. Use the laser level in areas with less ambient light for better visibility. |
Technische Daten
- Marke: Amazon-Grundlagen
- Modellnummer: CLL-002
- Laserklasse: Klasse II
- Lasertyp: Green Cross-Line Laser
- Reichweite: 59 Fuß / 708 Zoll
- Selbstnivellierender Bereich: ±4 Grad
- Material: 70 % Kunststoff, 30 % Metall
- Farbe: Gelb/Schwarz
- Energiequelle: 2 x AA-Batterien (nicht im Lieferumfang enthalten)
- Produktabmessungen: 2.8" L x 2.4" B x 3.3" H
- Artikelgewicht: 12 Unzen (0.34 Kilogramm)
- Betriebsmodus: Automatisch / Manuell
Garantie und Support
Informationen zur Garantie oder zum Kundensupport finden Sie auf der offiziellen Amazon Basics-Website. webBesuchen Sie die Website oder kontaktieren Sie direkt den Amazon-Kundenservice. Bewahren Sie Ihren Kaufbeleg für Garantieansprüche auf.