Outwell 400013

Outwell Schlafmatte für Doppelschlafsäcke 7.5 cm – Benutzerhandbuch

Modell: 400013

Einführung

Thank you for choosing the Outwell Sleepin Double Mat 7.5 CM. This self-inflating sleeping mat is designed to provide comfort and insulation for your outdoor adventures. Please read this manual carefully before first use to ensure proper setup, operation, and maintenance.

Sicherheitshinweise

  • Do not expose the mat to open flames or extreme heat sources.
  • Avoid sharp objects that could puncture the mat.
  • Außerhalb der Reichweite von Kleinkindern aufbewahren, wenn das Gerät nicht in Gebrauch ist.
  • Nicht als Schwimmhilfe verwenden.
  • An einem kühlen, trockenen Ort aufbewahren und direkte Sonneneinstrahlung vermeiden.

Packungsinhalt

  • 1 x Outwell Sleepin Double Mat 7.5 CM
  • 1 x Tragetasche

Einrichtung und Inflation

The Outwell Sleepin Double Mat is a self-inflating mat. Follow these steps for initial setup and inflation:

  1. Rolle die Matte aus: Remove the mat from its carry bag and unroll it completely on a flat, clean surface.
  2. Öffnen Sie das Ventil: Locate the valve(s) on the mat. Open the valve by turning it to the "Inflate" or "Open" position. You may hear air entering the mat.
Close-up of the mat's valve in the deflate position

Image: Close-up of the mat's valve, showing the 'Deflate' indicator. For inflation, ensure the valve is open to allow air in.

  1. Allow Self-Inflation: Allow the mat approximately 5-10 minutes to self-inflate. The foam inside will expand and draw air into the mat.
  2. Top-Up (Optional): If you prefer a firmer mat, you can manually top up the air by blowing into the valve. Close the valve immediately after topping up to prevent air from escaping.
Close-up of the mat's valve in the airtight position

Image: Close-up of the mat's valve, showing the 'Airtight' indicator. This position seals the mat, preventing air loss.

  1. Close the Valve: Once the desired firmness is achieved, firmly close the valve by turning it to the "Airtight" or "Closed" position.
Outwell Sleepin Double Mat 7.5 CM fully inflated and unrolled

Image: The Outwell Sleepin Double Mat 7.5 CM fully inflated and ready for use.

Deflation und Verpackung

To deflate and pack your Outwell Sleepin Double Mat:

  1. Öffnen Sie das Ventil: Open the valve by turning it to the "Deflate" or "Open" position.
Close-up of the mat's valve showing both deflate and airtight indicators

Image: Close-up of the mat's valve, indicating both 'Deflate' and 'Airtight' positions for easy operation.

  1. Roll the Mat: Starting from the end opposite the valve, begin to tightly roll the mat, pushing the air out as you go. You can kneel on the mat as you roll to help expel air.
  2. Close the Valve: Once rolled, close the valve to prevent air from re-entering.
  3. Sichern und speichern: Use the integrated straps or the provided carry bag to secure the rolled mat.
Outwell Sleepin Double Mat 7.5 CM rolled up and stored in its carry bag

Image: The Outwell Sleepin Double Mat 7.5 CM compactly rolled and placed inside its protective carry bag for transport and storage.

Pflege und Wartung

  • Reinigung: Reinigen Sie die Matte mitamp Mit einem Tuch und milder Seife reinigen. Keine scharfen Chemikalien oder Scheuermittel verwenden. Vor dem Verstauen vollständig an der Luft trocknen lassen.
  • Lagerung: For long-term storage, it is recommended to store the mat unrolled with the valve open in a cool, dry place. This helps the foam maintain its loft and self-inflating properties.
  • Reifenpannenreparatur: In case of a small puncture, use a standard sleeping mat repair kit (not included) to patch the hole.
Querschnitt view of the Outwell Sleepin Double Mat showing internal foam

Abbildung: Ein Querschnitt view illustrating the internal foam structure of the mat, which enables its self-inflating function.

Fehlerbehebung

Mat not fully inflating:

  • Ensure the valve is fully open.
  • Allow more time for self-inflation, especially if the mat has been stored rolled up for a long period.
  • Manually top up the air by blowing into the valve.

Air leaking from mat:

  • Ensure the valve is securely closed and in the "Airtight" position.
  • Check for punctures. Locate leaks by applying soapy water to the surface and looking for bubbles. Repair with a suitable patch kit.

Technische Daten

BesonderheitDetail
ModellOutwell Sleepin Double Mat 7.5 CM
Artikelmodellnummer400013
Abmessungen (LxBxH)183 x 128 x 7.5 cm
Stoffoberteil190T 75D, 100% Polyester
Fabric Bottom190T 75D, 100% Polyester
VentiltypAFC Valve
FarbeSchwarz
Packmaß66 x 28 cm
Gewicht4.9 kg
MaterialtypPolyester
MerkmaleInflatable, Lightweight, Compact
Maximale Gewichtskapazität150 Kilogramm
HerstellerOutwell
Multiple Outwell Sleepin Double Mats stacked, showing their thickness

Image: Multiple Outwell Sleepin Double Mats stacked, illustrating their compact design and consistent thickness.

Garantieinformationen

Outwell products are manufactured to high-quality standards. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official Outwell webBewahren Sie Ihren Kaufbeleg für eventuelle Garantieansprüche auf.

Kundenservice

For further assistance, technical support, or spare parts, please contact Outwell customer service. You can find contact details on the official Outwell webWebsite oder über Ihren Händler.

WebWebsite: www.outwell.com

E-Mail: Siehe webWebsite für Kontaktformular oder E-Mail-Adresse.

© 2024 Outwell. Alle Rechte vorbehalten.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.