1. Einleitung
This manual provides detailed instructions for the installation, operation, and maintenance of your LogiLink BP0146 Dual Monitor Wall Mount. This product is designed to securely mount two flat or curved monitors ranging from 17 to 32 inches, offering flexible positioning through its integrated gas spring mechanism. Please read this manual thoroughly before installation and retain it for future reference.
2. Sicherheitshinweise
- Ensure the wall structure can support the combined weight of the mount and two monitors (up to 9 kg per arm).
- Die maximale Tragfähigkeit von 9 kg (19.8 lbs) pro Arm darf nicht überschritten werden.
- Use appropriate mounting hardware for your specific wall type (wood stud, concrete, brick, etc.). Consult a professional if unsure.
- Halten Sie Kinder und Haustiere während der Installation fern.
- Tighten all screws firmly but do not overtighten to avoid stripping threads.
- Regularly check the mount for any signs of wear or loose connections.
3. Packungsinhalt
Verify that all components are present and undamaged before proceeding with installation. If any parts are missing or damaged, contact your retailer.
Image: Various components of the LogiLink BP0146 dual monitor wall mount.
Das Paket beinhaltet typischerweise:
- Wandplatte
- Gas Spring Monitor Arms (2 units)
- VESA Monitor Plates (2 units)
- Mounting Hardware Kit (screws, anchors, washers, Allen keys)
- Bedienungsanleitung
4. Installationsanleitung
4.1. Erforderliches Werkzeug
- Bleistift
- Bohren
- Balkensucher (für die Montage von Holzständern)
- Ebene
- Kreuzschlitzschraubendreher
- Socket Wrench (if applicable for lag bolts)
4.2. Wall Preparation and Wall Plate Installation
- Determine the desired mounting height for your monitors.
- Locate wall studs if mounting to wood, or ensure the concrete/brick wall is suitable.
- Position the wall plate against the wall at the desired height and use a level to ensure it is straight. Mark the drill holes with a pencil.
- Drill pilot holes according to the marked positions and wall type.
- Secure the wall plate to the wall using the provided screws and anchors (if necessary).
4.3. Arm Assembly and Monitor Attachment
Image: Monitor attached to the VESA plate on the arm.
- Attach the gas spring arms to the wall plate. Ensure they are securely fastened.
- Attach the VESA monitor plates to the back of your monitors using the appropriate screws from the hardware kit. The mount supports VESA patterns 75x75 mm and 100x100 mm.
- Carefully lift each monitor and slide its VESA plate onto the corresponding arm's mounting head. Ensure the monitor is securely locked in place.
4.4. Kabelmanagement
Image: Integrated cable management on the monitor arm.
Route all monitor cables (power, video, etc.) through the integrated cable management channels on the arms. This helps maintain a tidy workspace and prevents cable damage.
5. Bedienung und Einstellung
Abbildung: Seite view of the monitor arm extended.
5.1. Einstellung der Gasfederspannung
The gas spring mechanism allows for smooth vertical adjustment. If the monitor sags or floats, adjust the gas spring tension using the provided Allen key. Turn clockwise to increase tension for heavier monitors, and counter-clockwise to decrease tension for lighter monitors. Adjust until the monitor stays at the desired height.
5.2. Neigen, Schwenken und Drehen
Image: Monitor arms fully extended, illustrating flexibility.
- Neigung: The monitor can be tilted from -45° to +90° to reduce glare and optimize viewwinkeln.
- Schwenken: The arms allow for a swivel range of -90° to +90° at the wall plate and monitor connection points, enabling side-to-side movement.
- Drehung: Die VESA-Platte ermöglicht eine 360°-Drehung und somit ein einfaches Umschalten zwischen Quer- und Hochformat.
- Verlängerung: The arms can extend from the wall between 90 mm and 540 mm, providing ample depth adjustment.
6. Wartung
- Überprüfen Sie regelmäßig alle Schrauben und Verbindungen, um sicherzustellen, dass sie fest sitzen.
- Reinigen Sie die Halterung mit einem weichen, trockenen Tuch. Vermeiden Sie scheuernde Reiniger oder Lösungsmittel.
- Den Gasfedermechanismus nicht schmieren.
7. Fehlerbehebung
| Problem | Mögliche Ursache | Lösung |
|---|---|---|
| Achten Sie auf Durchhänge oder Abfälle. | Die Gasfederspannung ist für das Gewicht des Monitors zu gering. | Die Gasfederspannung kann durch Drehen der Einstellschraube im Uhrzeigersinn erhöht werden. |
| Monitor floats up | Die Gasfederspannung ist für das Gewicht des Monitors zu hoch. | Die Gasfederspannung kann durch Drehen der Einstellschraube gegen den Uhrzeigersinn verringert werden. |
| Monitor is not level | VESA plate or arm connection is not perfectly aligned. | Adjust the leveling screw on the VESA plate or re-align the monitor on the arm. |
| Die Halterung fühlt sich instabil an | Wall plate not securely fastened or wall structure is inadequate. | Re-check all wall plate screws. Ensure the wall can support the load. Consult a professional if needed. |
8. Spezifikationen
- Modell: BP0146
- Marke: LogiLink
- Farbe: Schwarz
- Material: Aluminium
- Montageart: Wandhalterung
- Number of Screens: 2
- Compatible Screen Size: 17 - 32 inches (flat and curved)
- Maximum Load Capacity per Arm: 9 kg
- VESA-Kompatibilität: 75x75 mm, 100x100 mm
- Wall Distance (Extension): 90 - 540 mm
- Neigungswinkel: -45° bis +90°
- Schwenkwinkel: -90° bis +90°
- Bildschirm Rotation: 360°
- Besondere Merkmale: Gas Spring Mechanism, Integrated Cable Management
- Ursprungsland: China
9. Garantie und Support
For warranty information and technical support, please refer to the documentation provided with your purchase or contact your local LogiLink distributor or retailer. Keep your proof of purchase for warranty claims.