SMARTRO Wireless Remote Sensor User Manual

Einführung

This manual provides detailed instructions for the setup, operation, and maintenance of your SMARTRO Wireless Remote Sensor (Model SENSOR92). This sensor is designed to work with compatible SMARTRO indoor/outdoor thermometers, specifically models SC91 and SC62, to provide accurate temperature and humidity readings.

Important Note: This sensor is not compatible with SMARTRO models SC92, SC93, or SC31B.

Produkt überview

Abbildung 1: Front view of the SMARTRO Wireless Remote Sensor, showing the digital display for temperature and humidity, channel indicator, and signal icon.

Abbildung 2: Hinteren view of the sensor with the battery cover removed, illustrating the battery compartment, °C/°F selection button, TX button, and 1 to 3 channel switch. Also visible is the wall-mounting hole.

The SMARTRO Wireless Remote Sensor (SENSOR92) is a compact, battery-powered device designed to transmit outdoor or indoor environmental data to a compatible main unit. It features a digital display showing current temperature (in °C or °F) and humidity (%RH). The sensor is equipped with a wall-mount hole and a table stand for versatile placement.

Setup und Installation

1. Einlegen der Batterie:

   • Öffnen Sie die Batteriefachabdeckung auf der Rückseite des Sensors (siehe Abbildung 2).
   • Insert two (2) AA batteries, ensuring correct polarity (+ and -). Batteries are not included.
   • Schließen Sie den Batteriefachdeckel fest.

2. Kanalauswahl:

   • Locate the 1 to 3 Channel Switch inside the battery compartment (refer to Figure 2).
   • Select a channel (1, 2, or 3) for the sensor. If you are using multiple sensors, ensure each sensor is set to a different channel.

3. Kopplung mit der Haupteinheit:

   • Place the sensor within close proximity to your SMARTRO main unit (e.g., SC91 or SC62).
   • On the sensor, press the "TX" button (Transmit button) located inside the battery compartment (refer to Figure 2). This will send a signal to the main unit.
   • Follow the pairing instructions for your specific SMARTRO main unit to establish a connection. The main unit should display the sensor's readings.

4. Platzierung:

   • The sensor can be placed on a flat surface using its integrated stand or mounted on a wall using the wall-mount hole.
   • For outdoor use, choose a location that is protected from direct sunlight and heavy rain to ensure accuracy and longevity. The transmission range is up to 200ft/60m in an open area.
   

   Abbildung 3: Example of outdoor sensor placement, demonstrating its wireless transmission capability to the main unit.

Bedienungsanleitung

• Auswahl der Temperatureinheit (°C/°F):

  • To switch between Celsius (°C) and Fahrenheit (°F), open the battery compartment cover.
  • Press the "°C/°F" selection button located inside the compartment (refer to Figure 2). The display will update accordingly.

• Anzeige lesen:

  • The sensor's digital display shows the current temperature and humidity readings.
  • These readings are also transmitted wirelessly to your paired SMARTRO main unit.

Wartung

• Batteriewechsel:

  • When the battery indicator on the sensor or main unit shows low power, replace both AA batteries promptly.
  • Ensure proper polarity during installation.

• Reinigung:

  • Wipe the sensor's exterior with a soft, damp Tuch. Verwenden Sie keine Scheuermittel und tauchen Sie das Gerät nicht in Wasser.

• Umweltschutz:

  • Keep the sensor away from direct sunlight and heavy rain to prevent damage and ensure accurate readings.

Fehlerbehebung

Technische Daten

• Modell: SENSOR92
• Kompatibilität: SMARTRO SC91, SC62 (Not compatible with SC92, SC93, SC31B)
• Energiequelle: 2 x AA-Batterien (nicht im Lieferumfang enthalten)
• Übertragungsbereich: Bis zu 60 m (Freifläche)
• Kanäle: 3 wählbare Kanäle
• Temperaturanzeige: °C / °F wählbar
• Temperaturtoleranz: +/- 5 ° F
• Feuchtigkeitstoleranz: +/- 5 % relative Luftfeuchtigkeit
• Material: Plastik
• Maße (ca.): 2.3 Zoll (Länge)
• Gewicht (ca.): 2.46 Unzen
• Konnektivitätstechnologie: RF
• Anzeigetyp: Digitales
• Produktpflege: Keep away from direct sunlight and rain.

Garantie und Support

SMARTRO products are designed for reliability and performance. For warranty information or technical support, please contact SMARTRO customer service. Details can often be found on the official SMARTRO webWebsite oder über Ihre Einkaufsplattform.

Hersteller: SMARTRO

E-Mail: support@smartro.co

Please have your model number (SENSOR92) and purchase details ready when contacting support.