Segotep Lux-S Mid-Tower Gaming PC Case Instruction Manual

1. Einleitung

Thank you for choosing the Segotep Lux-S Mid-Tower Gaming PC Case. This manual provides essential information for the proper assembly, installation, and maintenance of your new PC case. Please read these instructions carefully before beginning the installation process to ensure optimal performance and longevity of your components.

2. Sicherheitshinweise

• Vor dem Einbau oder Ausbau von Bauteilen muss immer die Stromversorgung von der Steckdose getrennt werden.
• Behandeln Sie alle Komponenten vorsichtig, um Schäden durch statische Elektrizität zu vermeiden. Erwägen Sie die Verwendung eines antistatischen Armbands.
• Be cautious of sharp edges inside the case.
• Kleinteile und Schrauben von Kindern fernhalten.
• Ensure proper ventilation around the assembled PC to prevent overheating.

3. Packungsinhalt

Bitte überprüfen Sie, ob alle Artikel in Ihrem Paket vorhanden sind:

• Segotep Lux-S Mid-Tower PC Case
• 3 x 120mm Front Fans (pre-installed)
• Zubehörbox (mit Schrauben, Abstandshaltern, Kabelbindern usw.)
• Benutzerhandbuch (dieses Dokument)

4. Produktüberschreitungview

The Segotep Lux-S is a stylish mid-tower gaming case featuring a full crystal-style design and transparent tempered glass side panels for showcasing your build. It is designed for efficient airflow and easy component installation.

Hauptmerkmale:

• Motherboard-Unterstützung: Compatible with ATX, Micro-ATX, and ITX motherboards.
• Kühlung: Includes three pre-installed 120mm front fans. Supports additional fans and air cooling solutions.
• Staubfiltration: Equipped with a magnetic anti-dust mesh on the top panel.
• Lagerung: Supports two 3.5" HDDs or one 3.5" HDD and one 2.5" SSD.
• Seitenleiste: Tempered glass side panels for an aesthetic view von internen Komponenten.

Abbildung 4.1: Vorderseite view of the Segotep Lux-S PC Case, highlighting the RGB fans and tempered glass panel.

Abbildung 4.2: Draufsicht view of the case, illustrating the magnetic dust filter on the top panel and the front I/O ports.

Figure 4.3: Interior layout of the Segotep Lux-S, detailing the motherboard mounting area, cable routing cutouts, and drive bay locations.

5. Einrichtung und Installation

5.1 Entfernen der Seitenverkleidungen

Carefully remove the tempered glass side panel(s) by unscrewing the thumb screws located at the rear of the case. Place the panels on a soft, flat surface to prevent scratches.

5.2 Motherboard-Installation

1. Installieren Sie die mit Ihrem Motherboard gelieferte I/O-Blende in die hintere Öffnung des Gehäuses.
2. Align your ATX, Micro-ATX, or ITX motherboard with the pre-installed standoffs. Ensure the standoffs match your motherboard's form factor.
3. Befestigen Sie das Motherboard mit den passenden Schrauben aus dem Zubehörkarton.

5.3 Installation des Netzteils (PSU)

Install your PSU into the dedicated compartment at the bottom rear of the case. Secure it with screws from the accessory box.

5.4 Installation des Speicherlaufwerks

• 3.5"-Festplatten: Locate the drive cage at the bottom of the case. Slide the HDDs into the trays and secure them with screws. The case supports up to two 3.5" HDDs.
• 2.5"-SSDs: SSDs can be mounted on designated brackets, typically behind the motherboard tray or within the HDD cage. Secure with screws. The case supports one 2.5" SSD if one 3.5" HDD is used.

5.5 Grafikkarten und Erweiterungskarten

Remove the necessary PCIe slot covers at the rear of the case. Insert your graphics card or other expansion cards into the motherboard's PCIe slots and secure them with screws.

5.6 Kabelmanagement

Nutzen Sie die Kabeldurchführungen und Befestigungspunkte hinter dem Mainboard-Tray, um die Kabel ordentlich zu verlegen. Dies verbessert die Luftzirkulation und die Optik.

5.7 Connecting Front I/O and Fan Cables

Connect the front panel cables (USB, audio, power switch, reset switch, LED indicators) to the corresponding headers on your motherboard. Connect the pre-installed 120mm front fans to your motherboard's fan headers or a fan controller, if applicable.

6. Bedienungsanleitung

After all components are securely installed and cables are connected, replace the side panels. Connect your monitor, keyboard, mouse, and power cable. Press the power button on the front panel to start your computer.

Abbildung 6.1: Nahaufnahme view of the three 120mm RGB fans pre-installed at the front of the Segotep Lux-S case.

Fan and Lighting Control:

The pre-installed fans may have RGB lighting. Depending on your motherboard and fan connections, you may be able to control the fan speed and lighting effects through your motherboard's software or a dedicated controller (if included or purchased separately).

7. Wartung

• Reinigung des Staubfilters: The top panel features a magnetic dust filter. Regularly remove and clean it with water or a soft brush to maintain optimal airflow and prevent dust buildup inside the case.
• Allgemeine Reinigung: Verwenden Sie ein weiches,amp cloth to clean the exterior of the case. Avoid abrasive cleaners or solvents that could damage the finish or tempered glass.
• Innenreinigung von Staub: Periodically open the case and use compressed air to remove dust from internal components, especially heatsinks and fans.

8. Fehlerbehebung

8.1 Computer Does Not Power On

• Stellen Sie sicher, dass das Netzkabel sowohl mit dem Netzteil als auch mit der Steckdose fest verbunden ist.
• Check that the PSU switch is in the 'ON' position.
• Überprüfen Sie, ob das Netzschalterkabel an der Vorderseite korrekt mit dem Anschluss auf dem Motherboard verbunden ist.
• Confirm all internal power cables (24-pin ATX, 8-pin CPU, PCIe power) are properly seated.

8.2 Fans Not Spinning / RGB Not Lighting Up

• Check that fan power cables are securely connected to the motherboard or fan controller.
• Ensure RGB cables (if separate) are connected to the appropriate RGB headers on the motherboard or controller.
• Consult your motherboard manual for proper fan and RGB header connections and software control.

8.3 Überhitzungsprobleme

• Ensure all case fans are operating correctly and oriented for optimal airflow (intake/exhaust).
• Reinigen Sie regelmäßig Staubfilter und interne Bauteile.
• Überprüfen Sie, ob der CPU-Kühler und die GPU-Lüfter ordnungsgemäß funktionieren.

9. Spezifikationen

10. Garantie und Support

For warranty information and technical support, please refer to the warranty card included with your product or visit the official Segotep webBewahren Sie Ihren Kaufbeleg für Garantieansprüche auf.

If you encounter any issues not covered in this manual, please contact Segotep customer support for assistance.