Produkt überview
The Energizer Headband Light is a hands-free LED lighting solution designed for various activities. It features a comfortable, stretchy headband with an integrated light unit. The device offers two light modes and provides up to 100 lumens of illumination. It is powered by AAA batteries and is built with a shatterproof lens and non-slip grip for durability and secure wear.
Image: The Energizer Headband Light highlighting its features: 2 light modes, shatterproof lens, non-slip grip, 100 lumens on high, and 19 hours run time on low.
Image: A woman wearing the Energizer Headband Light, demonstrating its soft, stretchy comfort during an activity.
Lieferumfang
- One (1) Energizer Headband Light
- Zwei (2) Energizer MAX AAA-Batterien
Image: The Energizer Headband Light packaging, showing one headband headlamp and two AAA alkaline batteries included.
Aufstellen
1. Einlegen der Batterie
- Locate the battery compartment cover on the light unit. This is typically on the top surface of the light module.
- Gently open the battery compartment cover. If it is stiff, a small flat-head screwdriver may be used to carefully pry it open.
- Insert two (2) AAA batteries into the compartment, ensuring the positive (+) and negative (-) terminals align correctly with the indicators inside the compartment.
- Schließen Sie den Batteriefachdeckel fest, bis er einrastet.
2. Einstellen des Kopfbandes
- The headband is designed to be soft and stretchy for comfort.
- Place the headband around your head so the light unit is positioned on your forehead.
- Adjust the band to achieve a snug yet comfortable fit. The band can adjust from approximately 5.5 inches to 14.25 inches in diameter.
- Ensure the light unit is stable and does not slip during movement. The non-slip grip on the inner side of the headband helps maintain position.
Bedienungsanleitung
Ein-/Ausschalten und Modusauswahl
The Energizer Headband Light features a single button for power control and mode cycling.
- Zum Einschalten: Press the power button located on the top of the light unit once. The light will activate in its default mode (High).
- Um die Modi durchzuschalten: While the light is on, press the power button again to switch between the available light modes (High and Low).
- Ausschalten: Drücken Sie den Netzschalter ein drittes Mal, um das Licht auszuschalten.
The High mode provides up to 100 lumens of bright light, suitable for activities requiring maximum illumination. The Low mode offers extended runtime, up to 19 hours, for tasks requiring less intense light or to conserve battery life.
Bild: Eine Nahaufnahme view of the Energizer Headband Light, highlighting its slim design and the power button for operation.
Image: Visual representation of the light output, showing a brighter 'White Mode' and a softer 'Warm Mode', illustrating the different illumination options.
Image: A woman engaged in crafting, demonstrating the hands-free convenience of the Energizer Headband Light for indoor activities.
Wartung
Batteriewechsel
- When the light output diminishes significantly, it is time to replace the batteries.
- Befolgen Sie die im Handbuch beschriebenen Schritte zum Einbau der Batterie. Aufstellen Abschnitt.
- Always replace both AAA batteries at the same time with new ones. Do not mix old and new batteries, or different types of batteries.
- Wenn das Gerät längere Zeit nicht verwendet wird, entfernen Sie die Batterien, um ein Auslaufen zu verhindern.
Reinigung
- Wischen Sie die Leuchteinheit mit einem weichen, fusselfreien Tuch ab.amp Tuch. Keine Scheuer- oder Lösungsmittel verwenden.
- The headband can be hand-washed with mild soap and water, then air-dried. Ensure the light unit is removed or protected from water during cleaning of the band.
Lagerung
- Store the headband light in a cool, dry place away from direct sunlight.
- Batterien vor längerer Lagerung entfernen.
Fehlerbehebung
| Problem | Mögliche Ursache | Lösung |
|---|---|---|
| Licht geht nicht an. |
|
|
| Das Licht ist schwach oder flackert. |
|
|
| Headband slips during use. |
|
|
Technische Daten
- Modellnummer: 039800139016
- Lichtquellentyp: LED
- Weiße Helligkeit: Bis zu 100 Lumen (Hochleistungsmodus)
- Laufzeit: Bis zu 19 Stunden (Energiesparmodus)
- Energiequelle: Batteriebetrieben
- Akku-Typ: 2 x AAA-Alkalibatterien (im Lieferumfang enthalten)
- Bandtage: 3 Volt
- Material: Plastik
- Besondere Merkmale: Shatterproof Lens, Non-Slip Grip, Impact Resistant (up to 1 meter)
- Wasserbeständigkeit: Nicht wasserfest
- Artikelgewicht: 2.89 Unzen
- Artikelabmessungen (L x B x H): 1.89" x 2.36" x 4.53"
- Kopfbandeinstellung: 5.5 inches to 14.25 inches in diameter
Wichtige Sicherheitsinformationen
- BATTERIE WARNUNG: Keep away from children. If swallowed, promptly see doctor; have doctor phone 800-498-8666. Do not install backwards, charge, put in fire or mix with used or other battery types – may explode or leak causing injury. Replace all batteries at the same time.
- Do not look directly into the LED light as it can cause temporary vision impairment.
- This device is not water resistant. Avoid exposure to water or moisture.
- Do not attempt to disassemble or modify the light unit. This will void any potential warranty and could cause damage or injury.
Image: Back of the product packaging, displaying important safety warnings and contact details.
Produktvideo
Video: An official product video from Energizer demonstrating the features and use cases of the Energizer Headband Light.
Garantie und Support
Garantieinformationen
The manufacturer's warranty description states "Not applicable." Please refer to your point of purchase for specific return or exchange policies.
Kundenservice
For questions or assistance, please visit the official Energizer webBesuchen Sie die Website oder kontaktieren Sie den Kundenservice. Weitere Informationen finden Sie unter: www.energizer.com
For battery-related inquiries, you may contact the number provided in the battery warning: 800-498-8666.