Technics SL-1200MK7 Direktantrieb-Plattenspieler – Benutzerhandbuch

Einführung

This manual provides essential instructions for the proper setup, operation, and maintenance of your Technics SL-1200MK7 Direct Drive Turntable. Please read this manual thoroughly before using the product to ensure optimal performance and longevity. Keep this manual for future reference.

Image: A black Technics SL-1200MK7 direct drive turntable, featuring a slipmat with the Technics logo, a tonearm, and pitch control faders. This image illustrates the overall design of the turntable.

Sicherheitshinweise

To prevent electric shock, fire, damage, or injury, please observe the following safety precautions:

• Setzen Sie dieses Gerät nicht Regen oder Feuchtigkeit aus.
• Die Abdeckung darf nicht entfernt werden. Wartungsarbeiten dürfen nur von qualifiziertem Fachpersonal durchgeführt werden.
• Ensure the unit is placed on a stable, level surface to prevent vibrations and ensure proper operation.
• Connect the unit to a grounded power outlet. Proper grounding is essential to prevent humming and ensure sound quality.
• Vermeiden Sie es, das Gerät in der Nähe von Wärmequellen oder in direktem Sonnenlicht aufzustellen.
• Außerhalb der Reichweite von Kindern aufbewahren.

Lieferumfang

Verify that all the following components are included with your Technics SL-1200MK7 turntable:

• Plattenspielereinheit
• Slipmat
• Slipsheet
• Staubschutzhülle
• EP-Plattenadapter
• Ausgleichsgewicht
• Kopfschale
• Screw set for cartridge
• PHONO-Kabel
• PHONO-Erdungskabel
• Netzkabel
• Benutzerhandbuch (dieses Dokument)

Aufstellen

Follow these steps to properly set up your turntable:

1. Auspacken und Aufstellen: Carefully remove all components from the packaging. Place the turntable on a firm, level surface, away from speakers to minimize vibration feedback.
2. Stylus/Cartridge Installation: Attach your chosen cartridge to the head shell using the provided screw set. Note: A stylus is not included with the turntable and must be purchased separately.
3. Tonearm Balance and Tracking Force:
   • Attach the head shell with the cartridge to the tonearm.
   • Mount the balance weight onto the rear of the tonearm.
   • Adjust the balance weight until the tonearm is perfectly level (floating freely).
   • Set the tracking force ring to "0" while the tonearm is balanced.
   • Rotate the balance weight to apply the recommended tracking force for your cartridge (typically 0-4g, as per the turntable's adjustment range).
4. Anti-Skating-Einstellung: Set the anti-skating dial to match the tracking force you applied. This helps prevent the stylus from skipping inwards.
5. Arm-Height Adjustment: The tonearm height can be adjusted from 0 to 6 mm to ensure the tonearm is parallel to the record surface when playing. Use the tonearm height adjustment ring at the base of the tonearm.
6. Anschlusskabel:
   • Connect the PHONO cable from the turntable's output to the PHONO input on your ampVerstärker oder Receiver.
   • Connect the PHONO earth lead (ground wire) from the turntable to the ground terminal on your ampschwerer. Proper grounding is crucial to eliminate hum.
   • Connect the AC power supply cord to the turntable and then to a wall outlet.
7. Staubschutzhülle: Place the dust cover on the turntable to protect it when not in use.

Bedienungsanleitung

Once set up, operating your SL-1200MK7 is straightforward:

1. Einschalten: Schalten Sie den Plattenspieler mit dem Netzschalter ein.
2. Geschwindigkeit auswählen: Choose the appropriate speed (33-1/3, 45, or 78 rpm) using the speed selector buttons. For 78 rpm, ensure the switch is engaged.
3. Ortsrekord: Carefully place a record on the platter. If playing an EP record, use the provided adaptor.
4. Wiedergabe starten:
   • Heben Sie den Tonarm mithilfe des Tonarmlifts an.
   • Drücken Sie die START/STOP button to begin platter rotation. The platter will reach the selected speed quickly due to the direct drive system (approx. 0.7 seconds to 33 1/3 rpm).
   • Carefully position the stylus over the desired groove on the record.
   • Senken Sie den Tonarm vorsichtig mit dem Tonarmhebel ab.
5. Tonhöhe anpassen: Use the pitch control fader to fine-tune the playback speed if desired.
6. Wiedergabe stoppen: At the end of the record, or when you wish to stop, lift the tonearm using the cueing lever, return it to the tonearm rest, and press the START/STOP button to halt platter rotation.

Wartung

Regular maintenance ensures the longevity and optimal performance of your turntable:

• Cleaning the Dust Cover: Use a soft, dry cloth to wipe the dust cover. For stubborn marks, use a slightly damp Mit einem Tuch abwischen und sofort trocknen. Scheuermittel vermeiden.
• Cleaning the Platter and Chassis: Wipe the metal platter and turntable chassis with a soft, dry cloth. Do not use solvents or harsh chemicals.
• Stiftpflege: Regularly clean your stylus with a dedicated stylus brush or cleaner to remove dust and debris, which can affect sound quality and record wear.
• Aktenpflege: Keep your records clean and stored properly to prevent dust accumulation and scratches.
• Vermeiden Sie Flüssigkeiten: Do not spill liquids on the turntable. If liquid enters the unit, disconnect power immediately and consult a qualified technician.

Fehlerbehebung

Sollten Sie Probleme mit Ihrem Plattenspieler haben, beachten Sie bitte die folgenden häufig auftretenden Probleme und Lösungen:

Technische Daten

Key technical specifications for the Technics SL-1200MK7 Direct Drive Turntable:

• Typ: Direct Drive Manual Turntable
• Plattenspielergeschwindigkeiten: 33-1/3, 45 rpm (with switch 78 rpm)
• Anlaufmoment: 0.18 N·m / 1.8 kg·cm
• Build-up Characteristics: 0.7 s. from standstill to 33 1/3 rpm
• Wow und Flattern: 0.025 % WRMS
• Plattendurchmesser: 332 mm (13-5/64 Zoll)
• Tonearm Effective Length: 230 mm (9-1/16")
• Tonearm Overhang: 15 mm (19/32")
• Tonearm Offset Angle: 22°
• Spurfehlerwinkel: Within 2° 32’ (at the outer groove of 30 cm (12") record) / Within 0° 32' (at the inner groove of 30 cm (12") record)
• Stylus Pressure Adjustment Range: 0 - 4 g (Direct Reading)
• Arm-height Adjustment Range: 0 - 6 mm
• Head Shell Weight: Ca. 7.6 g
• Stromversorgung: Wechselstrom 110-240 V, 60 Hz
• Energieverbrauch: 8 Watt
• Abmessungen (B x H x T): 453 x 169 x 353 mm (17.8 x 6.7 x 13.9 Zoll)
• Gewicht: Ca. 9.6 kg / 21.2 Pfund
• Material: Metall (Chassis)
• Farbe: Schwarz

Garantie und Support

For warranty information and customer support, please refer to the warranty card included with your product or visit the official Technics webWebsite.

Online-Ressourcen:

• Visit the Technics Store on Amazon
• Offizielle Technics WebWebsite