Einführung
This manual provides essential information for the safe and efficient use of your Legrand Rotative Power Strip, Model 49464. This power strip features three earthed outlets, an LED indicator switch, and a unique rotating design for flexible power distribution. It is supplied without a cord and requires manual wiring.
Sicherheitshinweise
- Always disconnect the power strip from the main power supply before performing any wiring or maintenance.
- Ensure that the total power consumption of connected devices does not exceed the maximum rating of 16A / 230V.
- This product is designed for indoor use only. Avoid exposure to moisture, water, or extreme temperatures.
- Die Steckdosenleiste darf nicht geöffnet oder verändert werden. Reparaturen dürfen nur von qualifiziertem Fachpersonal durchgeführt werden.
- Außerhalb der Reichweite von Kindern aufbewahren.
- Ensure proper grounding when wiring the power strip.
Packungsinhalt
- 1 x Legrand Rotative Power Strip Housing (Model 49464)
Note: Power cord and fixing screws/collars are not included and must be purchased separately.
Einrichtung und Verkabelung
- Bereiten Sie das Kabel vor: Obtain a 3G 1.5 mm² power cable of the desired length. Strip the outer insulation and individual wire insulation (Live, Neutral, Earth) according to standard electrical practices.
- Öffnen Sie das Wohngebäude: Carefully open the power strip housing to access the internal wiring terminals. Refer to the diagram below for guidance.
Abbildung 1: Haupt view of the Legrand Rotative Power Strip. This image shows the overall design with three earthed sockets and the integrated LED switch. - Schließen Sie die Kabel an: Connect the Live, Neutral, and Earth wires from your power cable to the corresponding terminals inside the power strip. Ensure all connections are secure and properly insulated.
Figure 2: Close-up of the earthed sockets. This image highlights the Type E sockets with their grounding pins and electrical ratings. - Schließt das Wohngebäude: Carefully reassemble the power strip housing, ensuring no wires are pinched.
- Montagemöglichkeiten: The power strip offers flexible installation:
- Freistehend: Place the power strip on a flat surface. The integrated feet provide stability.
- Wandmontage: Use appropriate screws (not supplied) to fix the power strip to a wall. The design allows for secure attachment.
- Cable Tie Mounting: Secure the power strip using cable ties (not supplied) for temporary or flexible installations.
Abbildung 3: Seite view of the power strip with feet extended, illustrating its freestanding capability and potential for mounting. 
Abbildung 4: Vorderseite view of the power strip with feet extended, showing the overall form factor when placed on a surface.
Bedienungsanleitung
- Anschließen an die Stromversorgung: Plug the wired power strip into a suitable wall outlet.
- Ein-/Ausschalten: Use the integrated LED switch to turn the power strip on or off. The LED indicator will illuminate when the power strip is active.
- Anschließen von Geräten: Plug your electrical devices into the three earthed outlets. The sockets are oriented at 45° for standard plugs and one at 90° for larger transformers, optimizing space and preventing blockage.
- Rotierendes Design: The cylindrical design allows you to rotate the power strip to orient the outlets as needed, providing flexibility for various plug types and cable management.
- Retractable Sockets: When not in use, the sockets can be retracted to prevent dust accumulation.
Wartung
- Reinigung: Disconnect the power strip from the main power supply before cleaning. Use a dry, soft cloth to wipe the exterior. Do not use liquid cleaners or abrasive materials.
- Inspektion: Periodically inspect the power strip and its connected cable for any signs of damage, such as frayed wires, cracks, or loose connections. If damage is found, discontinue use immediately and consult a qualified electrician.
- Staubschutz: Utilize the retractable socket feature to minimize dust accumulation when outlets are not in use.
Fehlerbehebung
| Problem | Mögliche Ursache | Lösung |
|---|---|---|
| Power strip does not turn on (LED off). | No power from wall outlet, faulty wiring, or internal issue. |
|
| Devices connected are not receiving power. | Power strip is off, device is faulty, or overloaded circuit. |
|
| Overheating of the power strip. | Überlastung, mangelhafte Belüftung oder interner Defekt. |
|
Technische Daten
| Besonderheit | Detail |
|---|---|
| Modellnummer | 49464 |
| Marke | Legrand |
| Anzahl der Verkaufsstellen | 3 (Type E, Earthed) |
| Bandtage | 230 Volt |
| Maximaler Strom | 16 Amperes |
| Besondere Merkmale | Rotative design, LED indicator switch, Retractable sockets, 45°/90° oriented sockets |
| Material | Plastik |
| Farbe | White and Dark Grey |
| Kabel | Not supplied (requires 3G 1.5 mm² cable) |
| Smart Home Kompatibilität | NEIN |
| Empfohlene Verwendung | Indoor settings, workspaces |
| Ursprungsland | China |
Garantie und Support
This Legrand product is covered by the manufacturer's warranty. For specific warranty terms and conditions, please refer to the documentation provided with your purchase or visit the official Legrand webWebsite.
For technical support, troubleshooting assistance, or to inquire about replacement parts, please contact Legrand customer service through their official channels. Contact information can typically be found on the product packaging or the Legrand webWebsite.
Legrand Official WebWebsite: Www.legrand.com