Hüppe Alpha 2 Seitenwand-Duschkabine mit begehbarem Eingang – Benutzerhandbuch

Einführung

This manual provides essential information for the safe and proper installation, operation, and maintenance of your Hüppe Alpha 2 Side Panel Walk-In Shower Enclosure. Please read all instructions carefully before beginning installation or use. Retain this manual for future reference.

Produkt überview

The Hüppe Alpha 2 Side Panel is a high-quality, fully framed walk-in shower enclosure designed for modern bathrooms. It features durable construction and flexible installation options.

Hauptmerkmale:

• Single side panel, fully framed design.
• Suitable for free-standing, floor-level installation.
• Constructed with high-quality anodized aluminum profiles.
• Compatible with both shower trays and tiled floors.
• Designed without an external handle.
• Allows for right or left-hand mounting.
• Supplied partially assembled for easier installation.
• Available with 2 mm Pacific S artistic glass or 4 mm tempered safety glass (DIN EN 12150).
• Optional Hüppe Anti-Plaque surface finish for tempered safety glass, facilitating easier cleaning.

Abbildung 1: Allgemeines view of the Hüppe Alpha 2 Side Panel installed as part of a walk-in shower enclosure.

Sicherheitshinweise

• Tragen Sie während der Installation stets geeignete persönliche Schutzausrüstung (PSA), einschließlich Schutzbrille und Handschuhe.
• Stellen Sie sicher, dass der Installationsbereich sauber, trocken und gut beleuchtet ist.
• Behandeln Sie Glasscheiben mit äußerster Vorsicht, um Bruch und Verletzungen zu vermeiden. Gehärtetes Glas ist zwar robust, kann aber bei Beschädigung an den Kanten in kleine Splitter zerspringen.
• Verify that the wall structure can support the weight of the shower enclosure.
• Do not use power tools near water or in damp conditions without proper safety precautions.
• Halten Sie Kinder und Haustiere vom Installationsbereich fern.
• Stellen Sie vor der Verwendung sicher, dass alle Befestigungen fest angezogen sind.
• Do not hang or apply excessive force to the shower panel once installed.

Setup und Installation

The Hüppe Alpha 2 Side Panel is supplied partially assembled. Detailed assembly instructions and fixing materials are included with your delivery. It is highly recommended to consult a professional for measurement and installation to ensure optimal fit and performance.

Hinweise vor der Installation:

• Unpack all components carefully and check against the packing list for completeness and any damage.
• Ensure the shower area dimensions are accurate. Note that the stated dimensions for the shower enclosure primarily refer to installation on shower trays.
• For floor-level installation, specific dimensions may differ. It is crucial to confirm the exact size of your shower area before proceeding with installation.
• Prepare the installation site by ensuring the floor and walls are level, clean, and structurally sound.

General Installation Steps (Refer to included manual for specifics):

1. Positionierung: Determine the desired orientation (right or left mounting) for the side panel.
2. Profile Installation: Sichern Sie sich den Wandprofifiles to the prepared wall using the provided fixing materials. Ensure they are plumb and level.
3. Platzierung der Panels: Carefully insert the glass panel into the profiles.
4. Sicherung: Secure the panel within the profiles according to the specific instructions.
5. Versiegelung: Apply appropriate silicone sealant to all joints and edges to ensure a watertight seal. Allow adequate curing time before use.
6. Letzte Kontrollen: Verify the stability of the installed panel and check for any gaps or potential leak points.

Abbildung 2: Bspample eines Profisfile and glass panel detail, illustrating the components involved in installation.

Bedienungsanleitung

The Hüppe Alpha 2 Side Panel is a fixed component of your shower enclosure and does not require active operation. Its function is to contain water within the shower area. Ensure that the panel is not subjected to excessive force or impact during use.

Wartung

Regular cleaning and maintenance will preserve the appearance and longevity of your shower enclosure.

Reinigung:

• Clean glass surfaces regularly with a soft cloth and a mild, non-abrasive glass cleaner.
• For panels with the optional Hüppe Anti-Plaque finish, cleaning is even easier. Simply wipe down with a soft cloth after each use to minimize water spots and limescale buildup.
• Clean aluminum profiles mit einem weichen, damp cloth. Avoid abrasive cleaners or scouring pads, which can damage the finish.
• Do not use harsh chemicals, solvents, or acidic cleaners, as these can damage the glass, profiles, or seals.
• Rinse thoroughly with clean water after cleaning to remove any cleaner residue.

Allgemeine Pflege:

• Inspect seals and silicone joints periodically for signs of wear or damage. Replace if necessary to maintain watertightness.
• Ensure proper ventilation in the bathroom to reduce humidity and prevent mold growth.

Fehlerbehebung

In diesem Abschnitt werden häufige Probleme behandelt, die bei Ihrer Duschkabine auftreten können.

If you encounter issues not listed here or if the suggested solutions do not resolve the problem, please contact Hüppe customer support or a qualified professional.

Technische Daten

Garantie und Support

For information regarding product warranty, please refer to the documentation provided with your purchase or contact Hüppe customer service directly. The product is typically eligible for returns within 30 days of purchase, subject to the seller's return policy.

For technical support, spare parts, or further assistance, please contact the manufacturer:

Hüppe GmbH
www.hueppe.com

Please have your model number (AL1352087264) and purchase details ready when contacting support.