BONTEC Mobile Standing Desk Instruction Manual

Einführung

This manual provides comprehensive instructions for the assembly, operation, and maintenance of your BONTEC Mobile Standing Desk. Designed for versatility and ergonomic comfort, this desk allows seamless transition between sitting and standing positions, promoting a healthier workstyle. Its mobile design makes it suitable for various environments, including offices, homes, and educational or medical settings.

Wichtige Sicherheitsinformationen

Bitte lesen und verstehen Sie alle Sicherheitshinweise und Anweisungen vor der Montage und Verwendung. Die Nichtbeachtung dieser Anweisungen kann zu Verletzungen oder Schäden am Produkt führen.

• Gewichtsbeschränkungen: Die maximale Tragfähigkeit darf nicht überschritten werden. 33 kg for the desktop and 11 kg for the keyboard tray. Overloading can cause instability and damage.
• Montage: Ensure all components are securely fastened according to the assembly instructions. Do not use the desk if any parts are missing or damaged.
• Stabilität: The "H"-shaped frame base provides stability. Always ensure the desk is on a flat, stable surface. Lock the casters when the desk is in a stationary position to prevent accidental movement.
• Bewegung: When moving the desk, ensure all items are removed from the desktop and keyboard tray to prevent them from falling. Unlock the casters before moving.
• Kinder und Haustiere: Keep children and pets away from the desk during assembly and operation. Moving parts can pose a pinch hazard.
• Pneumatic Spring: The height adjustment mechanism uses a pneumatic spring. Do not attempt to disassemble or tamper with the spring mechanism.

Ersatzteilliste

Prüfen Sie vor Beginn der Montage, ob alle Teile vorhanden und unbeschädigt sind. Die Identifizierung erfolgt anhand der untenstehenden Abbildung.

Figure 1: Fully assembled BONTEC Mobile Standing Desk.

Figure 2: Product dimensions including desktop, keyboard tray, and height range.

Typische Komponenten sind:

• Desktop-Oberfläche
• Tastaturablage
• Main Support Column (with pneumatic spring)
• "H"-shaped Base
• Feststellbare Rollen (x4)
• Taschenhaken
• Montagezubehör (Schrauben, Schraubenschlüssel usw.)

Einrichtung und Montage

All necessary tools for assembly are included. It is recommended to assemble the desk on a soft, clean surface to prevent scratches.

1. Komponenten auspacken: Nehmen Sie alle Teile vorsichtig aus der Verpackung und legen Sie sie bereit. Überprüfen Sie anhand der Teileliste, ob alle Teile vorhanden sind.
2. Rollen an der Basis befestigen: Securely screw the four locking casters into the designated holes on the "H"-shaped base. Ensure they are tightened to prevent wobbling.
3. Assemble Main Column to Base: Attach the main support column to the "H"-shaped base using the provided screws and tools. Ensure the connection is firm and stable.
4. Install Keyboard Tray Supports: Fasten the keyboard tray supports to the main column or desktop assembly as indicated in the diagrams.
5. Tastaturablage anbringen: Slide or attach the keyboard tray onto its supports. Ensure it can retract and extend smoothly.
6. Desktop einbinden: Secure the desktop surface to the top of the main support column. Pay attention to the orientation for the integrated slot and keyboard tray alignment.
7. Attach Bag Hook: Install the bag hook on the side of the main column as desired.
8. Endkontrolle: Once assembled, gently shake the desk to ensure all connections are secure and there is no excessive wobble.

Figure 3: Close-up of special features including the convenient slot, bag hook, "H"-shaped frame base, and mute wheels.

Bedienungsanleitung

Höhenverstellung

The desk features a pneumatic spring for smooth and effortless height adjustment, allowing you to switch between sitting and standing positions.

• To Adjust Upwards: Press the lever located under the desktop with your hand. The pneumatic spring will provide an upward force. Release the lever at your desired height.
• To Adjust Downwards: Press the lever with your hand and simultaneously apply downward pressure on the desktop. Release the lever at your desired height.

Figure 4: Illustration of the energy-saving gas spring mechanism for height adjustment, showing the lever and internal components.

Figure 5: Demonstrates the minimum (28.3 inches) and maximum (44 inches) height settings for sitting and standing use.

Using the Keyboard Tray

The keyboard tray is retractable, providing flexibility for your workspace setup.

• Zum Verlängern: Gently pull the keyboard tray outwards until it reaches its full extension.
• Zurückziehen: Push the keyboard tray inwards until it is fully tucked under the desktop.

Abbildung 6: Draufsicht view showing the generous desktop storage, including the integrated slot for tablets or phones, and the keyboard tray.

Mobilität und feststellbare Rollen

The four rolling casters allow for easy movement of the desk. Each caster is equipped with a locking mechanism.

• Bewegen: Ensure all casters are unlocked. Gently push the desk to your desired location.
• Zum Sichern: Once the desk is in position, press down on the locking lever on each caster to prevent movement.

Wartung und Pflege

Proper care will ensure the longevity of your BONTEC Mobile Standing Desk.

• Reinigung: The MDF desktop is waterproof and scratch-resistant. Wipe surfaces with a soft, damp Tuch. Vermeiden Sie Scheuermittel oder aggressive Chemikalien.
• Hardware: Überprüfen Sie regelmäßig alle Schrauben und Befestigungselemente, um sicherzustellen, dass sie fest sitzen. Ziehen Sie sie gegebenenfalls nach.
• Rollen: Keep casters free of dust and debris to ensure smooth rolling.
• Pneumatic Spring: No special maintenance is required for the pneumatic spring. Do not lubricate or attempt to open the mechanism.

Fehlerbehebung

Sollten Sie Probleme mit Ihrem Schreibtisch haben, beachten Sie bitte die folgenden häufig auftretenden Probleme und Lösungen:

Sollte das Problem weiterhin bestehen, wenden Sie sich bitte an den Kundendienst.

Produktspezifikationen

Garantieinformationen

BONTEC products are manufactured to high-quality standards. For specific warranty details and terms, please refer to the warranty card included with your product or visit the official BONTEC webWebsite. Bewahren Sie Ihren Kaufbeleg für Garantieansprüche auf.

Kundenservice

If you have any questions, require assistance with assembly, or need to report a damaged part, please contact BONTEC customer support. Contact information can typically be found on the product packaging or the official BONTEC webWebsite.

Weitere Informationen finden Sie im BONTEC Store auf Amazon.