Acctim Delaware 71682 Radio Controlled LCD Digital Alarm Clock User Manual

1. Einleitung

Vielen Dank für Ihren Einkauf.asing the Acctim Delaware 71682 Radio Controlled LCD Digital Alarm Clock. This manual provides essential information for setting up, operating, and maintaining your new alarm clock. Please read these instructions carefully before use and retain them for future reference.

2. Produktüberschreitungview

The Acctim Delaware 71682 is a radio-controlled digital alarm clock featuring a large LCD display with a green backlight, dual alarms, calendar, and indoor temperature display. Its radio-controlled function ensures accurate timekeeping in the UK and Ireland.

2.1. Komponenten und Anzeige

Familiarize yourself with the clock's buttons and display elements.

Bild 1: Front view of the Acctim Delaware 71682 Radio Controlled LCD Digital Alarm Clock. The display shows time, day, date, and alarm settings. Control buttons are visible at the bottom, and alarm switches on the sides.

Bedienelemente auf der Vorderseite:

• ZEITEINSTELLUNG: Dient zum Aufrufen des Zeiteinstellungsmodus.
• WECKER GESTELLT: Dient zum Aufrufen des Alarmeinstellungsmodus.
• KLANG: Used to select alarm sound, and typically functions as the Snooze/Backlight button.
• °C/°F: Toggles between Celsius and Fahrenheit for temperature display. Also functions as a 'down' adjustment button in setting modes.
• 12/24: Toggles between 12-hour and 24-hour time format. Also functions as an 'up' adjustment button in setting modes.

Bedienelemente an der Seite:

• ALARM 1 ON/OFF Switch: Activates or deactivates Alarm 1.
• ALARM 2 ON/OFF Switch: Activates or deactivates Alarm 2.

Bild 2: Hinteren view of the Acctim Delaware 71682 Alarm Clock. This image highlights the battery compartment cover and the recessed RESET button.

Bedienelemente auf der Rückseite:

• Batteriefach: Holds the required AA batteries.
• Reset-Knopf: A small, recessed button to reset the clock to factory defaults.

3. Einrichtung

3.1. Einlegen der Batterie

1. Öffnen Sie die Batteriefachabdeckung auf der Rückseite der Uhr.
2. Insert 2 new AA batteries, ensuring the correct polarity (+ and -).
3. Schließen Sie den Batteriefachdeckel fest.

Note: Batteries are not included. Always use fresh batteries for optimal performance.

3.2. Initial Setup and Radio Control Synchronization

Upon battery installation, the clock will automatically attempt to synchronize with the radio-controlled time signal (MSF signal for UK and Ireland). This process may take several minutes to a few hours, depending on your location and signal strength. During synchronization, a radio signal icon will flash on the display.

• Platzieren Sie die Uhr in der Nähe eines Fensters, um einen besseren Signalempfang zu erzielen.
• Vermeiden Sie es, es in der Nähe von elektronischen Geräten aufzustellen, die Störungen verursachen könnten.
• Once synchronized, the radio signal icon will appear solid on the display, and the time will be set automatically.

If the clock fails to synchronize, you may need to set the time manually.

4. Bedienungsanleitung

4.1. Uhrzeit und Datum manuell einstellen

If radio control is unavailable or you prefer manual setting:

1. Halten Sie die ZEITEINSTELLUNG Drücken Sie die Taste, bis die Stundenziffern zu blinken beginnen.
2. Verwenden Sie die 12/24 (auf und ° C / ° F (down) buttons to adjust the hour.
3. Drücken ZEITEINSTELLUNG again to confirm the hour and move to minutes. Adjust minutes using the up/down buttons.
4. Drücken Sie weiter ZEITEINSTELLUNG to cycle through and set year, month, and day.
5. Drücken ZEITEINSTELLUNG one last time or wait for 10 seconds for the settings to be saved automatically.

4.2. Alarme einstellen (Alarm 1 und Alarm 2)

Die Uhr verfügt über zwei unabhängige Wecker.

1. Halten Sie die WECKER GESTELLT button until the Alarm 1 hour digits start flashing.
2. Verwenden Sie die 12/24 (auf und ° C / ° F (down) buttons to adjust the desired Alarm 1 hour.
3. Drücken WECKER GESTELLT again to confirm the hour and move to Alarm 1 minutes. Adjust minutes using the up/down buttons.
4. Drücken WECKER GESTELLT again to move to Alarm 2 hour setting. Repeat the adjustment process for Alarm 2.
5. Drücken WECKER GESTELLT one last time or wait for 10 seconds to save the alarm settings.

4.3. Aktivieren/Deaktivieren von Alarmen

Use the physical switches on the sides of the clock:

• Schieben Sie den ALARM 1 EIN/AUS switch to 'ON' to activate Alarm 1. An alarm icon (1) will appear on the display.
• Schieben Sie den ALARM 2 EIN/AUS switch to 'ON' to activate Alarm 2. An alarm icon (2) will appear on the display.
• Slide the switches to 'OFF' to deactivate the respective alarms.

Bild 3: Front view of the Acctim Delaware 71682 with Alarm 1 activated. The 'ALARM 1' switch is in the 'ON' position, and the corresponding alarm icon is visible on the LCD.

4.4. Using the Alarm and Snooze Function

• Wenn ein Alarm ertönt, drücken Sie die Taste KLANG button (or any other front button, depending on model variation) to activate the snooze function. The alarm will pause and sound again after approximately 5 minutes.
• To stop the alarm completely, slide the corresponding ALARM EIN / AUS Auf „AUS“ schalten.

4.5. Anzeigeeinstellungen

• 12/24-Stunden-Format: Drücken Sie die 12/24 button to switch between 12-hour (with AM/PM indicator) and 24-hour time display.
• Temperatureinheit: Drücken Sie die ° C / ° F button to toggle the indoor temperature display between Celsius and Fahrenheit.
• Hintergrundbeleuchtung: Drücken Sie die KLANG button (or the top button if present) to activate the green backlight for a few seconds.

Bild 4: Front view of the Acctim Delaware 71682 with its green backlight activated, illuminating the time, date, and temperature display for enhanced visibility in low light conditions.

5. Wartung

5.1. Reinigung

To clean the clock, use a soft, dry cloth. Do not use abrasive cleaners or chemical solvents, as these may damage the casing oder Anzeige.

5.2. Batteriewechsel

When the display becomes dim or the clock functions erratically, it's time to replace the batteries. Follow the battery installation steps in Section 3.1. Always replace both batteries at the same time with new ones.

6. Fehlerbehebung

• Kein oder nur schwaches Display:
  Ensure batteries are inserted correctly with the correct polarity. Replace with fresh AA batteries.
• Falsche Uhrzeit:
  Check if the radio control signal icon is solid. If it's flashing or absent, the clock may not be receiving the signal. Move the clock to a location with better reception (e.g., near a window). If the issue persists, set the time manually as described in Section 4.1.
• Kein Alarm:
  Verify that the respective ALARM ON/OFF switch (Alarm 1 or Alarm 2) is in the 'ON' position. Ensure the alarm time is set correctly.
• Hintergrundbeleuchtung funktioniert nicht:
  Ensure batteries have sufficient power. The backlight is designed to illuminate for a short period only.
• Clock unresponsive:
  Remove the batteries, wait for a few minutes, then reinsert them. If the problem persists, use a pointed object (like a paperclip) to press the recessed ZURÜCKSETZEN button on the back of the clock. Note that this will clear all settings.

7. Spezifikationen

8. Garantieinformationen

This Acctim product comes with a 24 Monate Garantie from the date of purchase. Please retain your proof of purchase for any warranty claims. The warranty covers manufacturing defects but does not cover damage caused by misuse, accidents, unauthorized repairs, or normal wear and tear.

9. Kundendienst

For further assistance, troubleshooting, or warranty inquiries, please contact Acctim customer support through their official webBitte wenden Sie sich an die Website oder den Händler, bei dem Sie das Produkt gekauft haben. Halten Sie bitte Ihre Modellnummer (71682) und den Kaufbeleg bereit.