Einführung
Thank you for choosing the Emerio WK-122730 Glass Kettle. This appliance is designed for efficient water heating and tea preparation, offering precise temperature control and a convenient integrated tea infuser. Please read this manual carefully before first use to ensure safe and optimal operation.

Image: The Emerio WK-122730 glass kettle with its integrated tea infuser, filled with tea, on a wooden surface.
Sicherheitshinweise
Beachten Sie beim Gebrauch elektrischer Geräte stets die grundlegenden Sicherheitsvorkehrungen, um das Risiko von Bränden, Stromschlägen und Verletzungen zu verringern.
- Den Wasserkocher, die Basisstation, das Kabel oder den Stecker nicht in Wasser oder andere Flüssigkeiten eintauchen.
- Stellen Sie sicher, dass die LautstärketagDie auf dem Gerät angegebene Spannung entspricht der örtlichen Netzspannung.tage vor dem Anschließen.
- Bewahren Sie das Gerät außerhalb der Reichweite von Kindern auf.
- Betreiben Sie den Wasserkocher nicht, wenn das Kabel oder der Stecker beschädigt ist oder wenn das Gerät Fehlfunktionen aufweist oder in irgendeiner Weise beschädigt wurde.
- Place the kettle on a stable, flat, heat-resistant surface, away from hot surfaces or open flames.
- Do not fill above the maximum level indicator to prevent boiling water from overflowing.
- Vor dem Betrieb stets den Deckel fest verschließen.
- Ziehen Sie den Wasserkocher bei Nichtgebrauch und vor der Reinigung aus der Steckdose.
- The kettle is equipped with an automatic shut-off and boil-dry protection for safety.
Einrichtung und erste Verwendung
- Auspacken: Carefully remove the kettle and all accessories from the packaging. Retain packaging for future storage or disposal.
- Erstreinigung: Vor dem ersten Gebrauch den Wasserkocher bis zur maximalen Fülllinie mit sauberem Wasser füllen. Das Wasser aufkochen und anschließend wegschütten. Diesen Vorgang 2-3 Mal wiederholen, um eventuelle Produktionsrückstände zu entfernen.
- Platzierung: Stellen Sie die Basisstation auf eine trockene, ebene und stabile Oberfläche. Achten Sie darauf, dass das Netzkabel nicht herabhängt oder mit heißen Oberflächen in Berührung kommt.
- Stromanschluss: Stecken Sie das Netzkabel in eine geerdete Steckdose.

Image: The Emerio WK-122730 glass kettle resting on its 360-degree rotating power base, illustrating ease of placement.
Bedienungsanleitung
Füllen des Wasserkochers
- Nehmen Sie den Wasserkocher von der Basisstation.
- Open the lid and fill the kettle with the desired amount of fresh, cold water. Do not fill below the minimum (0.5L) or above the maximum (1.7L) mark.
- Schließen Sie den Deckel fest.
Verwendung des Tee-Eies
The kettle features a removable stainless steel tea infuser for brewing loose leaf tea directly.
- After filling with water, open the infuser basket and add your desired amount of loose leaf tea.
- Close the infuser basket and place it securely into the kettle.
- Proceed with temperature selection and heating.
- Once brewing is complete, carefully remove the infuser using its handle to prevent over-steeping.

Image: A person demonstrating the placement of the tea infuser into the Emerio WK-122730 glass kettle.
Temperature Selection and Heating
The kettle offers 5 preset temperature options for various beverages.
- Stellen Sie den gefüllten Wasserkocher auf die Basisstation.
- Press the temperature selection button (often marked with a thermometer icon or temperature values) repeatedly to cycle through the available temperatures: 50°C, 70°C, 80°C, 90°C, 100°C. The selected temperature will be indicated by an illuminated LED.
- Press the power button (often marked with an 'On/Off' symbol) to start the heating process.
- The LED lighting inside the kettle will change color according to the water temperature, providing a visual indication of the heating progress.
- Sobald die gewählte Temperatur erreicht ist, schaltet sich der Wasserkocher automatisch ab.

Image: A close-up of the control panel on the Emerio WK-122730 kettle, showing temperature selection buttons and power button.

Bild: Mehrere views of the Emerio WK-122730 glass kettle, illustrating the color-changing LED illumination for 50°C, 70°C, 80°C, 90°C, and 100°C.
Warmhaltefunktion
The kettle includes a keep-warm function. After reaching the selected temperature, the kettle can maintain this temperature for a certain period. Refer to the specific product documentation for the exact duration of the keep-warm function.
Wartung und Reinigung
Regelmäßige Reinigung und Wartung verlängern die Lebensdauer Ihres Wasserkochers.
- Vor der Reinigung: Vor der Reinigung immer den Wasserkocher vom Stromnetz trennen und vollständig abkühlen lassen.
- Außenreinigung: Wischen Sie die Außenseite des Wasserkochers und den Sockel mit einem weichen, fusselfreien Tuch ab.amp Tuch. Verwenden Sie keine Scheuermittel oder scharfen Chemikalien.
- Innenreinigung: For general cleaning, rinse the interior with clean water.
- Tea Infuser Cleaning: Remove the tea infuser and rinse it under running water. Use a small brush if necessary to remove tea leaves. It is dishwasher safe.
- Entkalkung: Im Laufe der Zeit können sich im Inneren des Wasserkochers mineralische Ablagerungen (Kalk) bilden, insbesondere in Gebieten mit hartem Wasser.
- Füllen Sie den Wasserkocher mit einer Mischung aus Wasser und weißem Essig (Verhältnis 1:1) oder einer handelsüblichen Entkalkungslösung.
- Die Mischung aufkochen und mindestens 30 Minuten stehen lassen, bei starkem Schuppenbefall auch länger.
- Discard the mixture and rinse the kettle thoroughly several times with fresh water to remove any residue and odor.
- Lagerung: Bewahren Sie den Wasserkocher bei Nichtgebrauch an einem trockenen Ort, fern von direkter Sonneneinstrahlung und Feuchtigkeit auf.
Fehlerbehebung
| Problem | Mögliche Ursache | Lösung |
|---|---|---|
| Der Wasserkocher heizt nicht auf. | No power supply; Kettle not properly placed on base; Boil-dry protection activated. | Check power outlet and plug; Ensure kettle is correctly seated on the base; Allow kettle to cool down, then refill with water. |
| Wasser hat einen ungewöhnlichen Geschmack. | Geruch nach neuem Gerät; Kalkablagerungen. | Perform initial cleaning steps (boil and discard water several times); Descale the kettle. |
| Kettle switches off before boiling/reaching selected temperature. | Limescale buildup; Faulty sensor. | Descale the kettle thoroughly; If problem persists, contact customer support. |
| Die LED-Leuchten funktionieren nicht. | Elektrische Störung. | Ensure kettle is powered on; If problem persists, contact customer support. |
Produktspezifikationen
- Modellnummer: WK-122730
- Kapazität: 1.7 Liter
- Leistung: 2200 Watt
- Bandtage: 220 Volt
- Material: Borosilicate Glass, Stainless Steel, Plastic
- Farbe: Silber
- Besondere Merkmale: BPA-free, Temperature Selection (50|70|80|90|100°C), Color-changing LED Interior Lighting, Keep Warm Function, Automatic Shut-off, Overheat Protection, Removable Stainless Steel Tea Infuser.
- Artikelgewicht: 1.42 Kilogramm
- Ursprungsland: China

Image: The Emerio WK-122730 glass kettle displaying its approximate height (27 cm) and base width (21.80 cm).

Image: A circular green logo indicating the product is BPA-free.
Garantieinformationen
This product comes with a manufacturer's warranty. Please refer to the warranty card included in your product packaging for specific terms and conditions. Spare parts availability is typically 1 year from the date of purchase. Keep your proof of purchase for any warranty claims.
Kundenservice
If you encounter any issues not covered in the troubleshooting section or require further assistance, please contact the retailer or the manufacturer's customer service department. Contact details can usually be found on the product packaging or the manufacturer's official webWebsite.