LEDVANCE 65636
Sylvania 32ft RGB Flexible Light Strip Starter Kit Instruction Manual
Modell: 65636 | Marke: LEDVANCE
Wichtige Sicherheitsinformationen
- Nur zur Verwendung im Innenbereich: Dieses Produkt ist für die Verwendung in trockenen Innenräumen konzipiert. Nicht Wasser oder hoher Luftfeuchtigkeit aussetzen.
- Elektrische Sicherheit: Ensure the power adapter is connected to a suitable power outlet. Do not overload electrical circuits.
- Schnittanleitung: The LED strips can be cut for customized length. Only cut along the designated markings to avoid damaging the strip.
- Installation: Trennen Sie vor der Installation oder Wartung immer die Stromversorgung.
- Hitze: Do not cover the LED strips with materials that may trap heat, as this can cause overheating.
- Kinder: Bewahren Sie das Produkt und seine Komponenten außerhalb der Reichweite von Kindern auf.
Packungsinhalt
Überprüfen Sie, ob alle Komponenten in Ihrem Paket vorhanden sind:
- (2) 16.4ft RGB Flexible LED Light Strips
- (1) Netzteil mit Stecker
- (1) IR Remote Controller (with battery included)
- (20) Befestigungsclips
Image: Main product image showing the light strips, remote, power adapter, and clips.
Setup und Installation
- Bereiten Sie die Oberfläche vor: Ensure the installation surface is clean, dry, and smooth for optimal adhesion of the clips.
- Komponenten verbinden: Connect the LED light strips to the controller, ensuring the arrows on the connectors align. Then, connect the power supply to the controller.
- Testfunktionalität: Before permanent mounting, plug in the power supply and use the remote control to test the light strips. Verify all colors and modes function correctly.
- Customize Length (Optional): If a shorter length is desired, only cut the LED strips along the designated cutting marks (usually indicated by a scissor icon or copper pads). Cutting elsewhere will damage the strip.
- Mount the Strips: Remove the adhesive outer layer from the back of the mounting clips and press firmly for five seconds when mounting. Use the provided clips to secure the light strips in your desired location, such as under cabinets, behind TVs, or along shelves.
- Remote aktivieren: Remove the plastic tab from the remote control's battery door to activate the battery.
Image: Step-by-step diagram illustrating how to connect the light strips, identify cutting points, and mount them using clips.
Betrieb
The Sylvania RGB Flexible Light Strips are controlled using the included IR remote. Ensure the remote is pointed towards the IR receiver on the controller for optimal response.
Fernbedienungsfunktionen:
- EIN/AUS: Power the light strips on or off.
- Farbauswahl: Wählen Sie mithilfe der Farbtasten aus 16 statischen Farben.
- Dimmen: Adjust the brightness of the selected color or dynamic mode.
- Dynamische Modi: Select from 4 pre-programmed dynamic modes (e.g., Flash, Strobe, Fade, Smooth) to create different lighting effects.
Image: Detailed illustration of the IR remote control, highlighting buttons for power, color selection, dimming, and dynamic modes.
Wartung
- Reinigung: Wischen Sie die LED-Streifen vorsichtig mit einem trockenen, weichen Tuch ab. Verwenden Sie keine flüssigen Reiniger oder Scheuermittel.
- Lebensdauer: The LED technology provides a long operational life of up to 30,000 hours under normal use conditions.
- Austausch der Fernbedienungsbatterie: If the remote control becomes unresponsive, replace the CR2025 lithium coin cell battery.
Fehlerbehebung
| Problem | Mögliche Ursache | Lösung |
|---|---|---|
| Das Licht geht nicht an. | Power connection issue, remote battery dead, IR receiver blocked. | Check all connections (power supply, controller, strips). Ensure arrows on connectors align. Replace remote battery. Ensure remote is pointed at the IR receiver without obstruction. |
| Die Fernbedienung reagiert nicht. | Remote battery dead, remote too far, IR receiver blocked. | Replace remote battery. Ensure remote is within range and pointed directly at the IR receiver. Remove any obstructions between the remote and receiver. |
| Some sections of the light strip are not lighting up. | Damaged section, incorrect cutting. | Inspect the strip for physical damage. If a section was cut incorrectly, it may be permanently damaged. Ensure connections are secure. |
Technische Daten
| Besonderheit | Detail |
|---|---|
| Modellnummer | 65636 |
| Marke | LEDVANCE (Sylvania) |
| Farbe | RGB (16 colors) + White |
| Länge | 32ft (2 x 16.4ft strips) |
| Verwendung | Nur für den Innenbereich |
| Besondere Merkmale | Color Changing, Dimmable, Energy Efficient |
| Lichtquellentyp | LED |
| Stromquelle | Kabelgebundene Elektrik |
| Controllertyp | IR-Fernbedienung |
| Bandtage | 12 Volt |
| Wastage | 24 Watt |
| Konnektivität | Infrarot |
| Material | Plastik |
| Artikelgewicht | 10.88 Unzen |
| Lebensdauer | Bis zu 30,000 Stunden |
| Wasserbeständigkeit | Nicht wasserfest |
| UPC | 046135656361 |
Garantie und Support
This Sylvania LED Flexible Light Strip Starter Kit is backed by a 1 Jahr Herstellergarantie.
For technical support, warranty claims, or additional product information, please visit the official LEDVANCE webWebsite oder wenden Sie sich an die Kundendienstabteilung.
Besuchen Sie auch die LEDVANCE Store auf Amazon Für weitere Produkte und Informationen.
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.