Einführung
This manual provides detailed instructions for the installation, operation, and maintenance of your Herdio 6.5-inch Bluetooth Ceiling Speakers with In-Wall Amplifier. This system is designed to deliver high-fidelity audio for various indoor environments, including home theaters, bathrooms, living rooms, kitchens, and offices. Please read this manual thoroughly before installation and use to ensure optimal performance and safety.
Packungsinhalt
Bitte überprüfen Sie, ob alle unten aufgeführten Artikel in Ihrem Paket enthalten sind:
- 1x Wall Mount Bluetooth Ampschwerer
- 1x Netzteil
- 2x Schrauben
- 2x 6.5-inch In-Ceiling Speakers
- 2x Speaker Wires
- 2x User Manuals (one for amplifier, one for speakers)
Aufstellen
This section guides you through the physical installation and wiring of your Herdio ceiling speaker system.
1. Amplifier-Installation
Die In-Wall amplifier is designed for flush mounting in a standard wall plate size. Ensure you have appropriate wiring access before proceeding.
- Bereiten Sie die Wand vor: Use the provided template (if applicable) to mark and cut an opening in the wall for the ampschwerer.
- Netzkabel anschließen: Connect the 12V DC power cable to the designated two-pin connector on the back of the amplifier-Modul.
- Audiokabel anschließen: Connect the audio cable to the three-pin connector on the back of the amplifier-Modul.
- Sicher AmpReiniger: Legen Sie den amplifier module into the wall opening and secure it using the provided screws.
- Frontplatte anbringen: Place the decorative faceplate over the installed amplifier and secure it.
2. Lautsprecherinstallation
The ceiling speakers are designed for flush mounting. Ensure you have appropriate ceiling space and wiring access.
- Mark Cutout: Use the provided cutout template to mark the desired location for each speaker in the ceiling.
- Schnittöffnung: Carefully cut the circular opening in the ceiling according to the marked template. The cutout diameter is approximately 8.07 inches (20.5 cm).
- Gitter entfernen: Gently remove the magnetic grille from the front of each speaker.
- Lautsprecherkabel anschließen: Connect the speaker wires to the spring-loaded terminals on the back of each speaker. Ensure correct polarity: red wire to positive (+) terminal, black wire to negative (-) terminal.
- Lautsprecher einfügen: Insert the speaker into the ceiling opening. The mounting clamps will automatically engage.
- Anziehen Clamps: Use a screwdriver to tighten the screws on the front baffle of the speaker. This will rotate the mounting clamps and secure the speaker firmly in place.
- Replace Grille: Reattach the magnetic grille to the speaker.
3. Schaltplan
Connect the speaker wires from the ceiling speakers to the amplifier terminals. Ensure correct polarity for both speakers (red to +, black to -).
4. Stromanschluss
Connect the AC adapter to a standard 120V power outlet and then plug the DC end into the amplifier's power input. The power LED on the amplifier will illuminate.
Video: This video demonstrates the unboxing, wiring, Bluetooth pairing, and installation process for the Herdio 6.5-inch Bluetooth Ceiling Speakers Set.
Bedienungsanleitung
Learn how to use your Herdio ceiling speaker system.
1. Ein-/Ausschalten und Lautstärkeregelung
Turn the knob on the amplifier clockwise to power on the unit and increase the volume. Turn it counter-clockwise to decrease volume and power off. You will hear an audible drop sound when powering on.
2. Bluetooth-Kopplung
After powering on, the blue Bluetooth indicator light will flash, indicating it is in pairing mode. On your smart device (phone, tablet, etc.), search for available Bluetooth devices and select 'Herdio'. Once connected, the blue light will remain solid.
3. Eingabeauswahl
Use the input selection switch on the amplifier to choose between Bluetooth (BT), Auxiliary (AUX), or Microphone (MIC) input modes.
4. USB-Funktionalität
The USB port functions as a flash memory reader for media playback and also provides a charging port for your devices (5V/1A).
5. Mikrofoneingang
Connect a microphone to the 1/4-inch MIC IN jack for paging or voice applications.
Wartung
To ensure the longevity and optimal performance of your Herdio ceiling speakers and ampVerstärker, befolgen Sie diese Wartungsrichtlinien:
- Reinigung: Reinigen Sie die amplifier faceplate and speaker grilles. Avoid using harsh chemicals, solvents, or abrasive cleaners, as these can damage the finish.
- Staubentfernung: Periodically use a soft brush or a low-power vacuum with a brush attachment to gently remove dust from the speaker grilles.
- Umgebungsbedingungen: Ensure the speakers and amplifier are installed in environments free from excessive moisture, extreme temperatures, and direct sunlight. The product is not waterproof.
- Verkabelungsprüfung: Überprüfen Sie regelmäßig alle Kabelverbindungen, um sicherzustellen, dass sie fest sitzen und frei von Korrosion oder Beschädigungen sind.
Fehlerbehebung
If you encounter issues with your Herdio ceiling speaker system, refer to the following common problems and solutions:
- Kein Strom:
- Ensure the AC adapter is securely plugged into a working power outlet and the amplifier's DC input.
- Check if the power knob on the amplifier is turned clockwise to the 'ON' position.
- Überprüfen Sie die Funktionsfähigkeit der Steckdose, indem Sie ein anderes Gerät anschließen.
- Kein Ton aus den Lautsprechern:
- Confirm that the speaker wires are correctly connected to both the speakers and the amplifier, observing proper polarity (+ to +, - to -).
- Ensure the volume knob on the ampDer Verstärker ist aufgedreht.
- Check the input selection switch on the amplifier to ensure the correct source (BT, AUX, MIC) is selected.
- If using Bluetooth, ensure your device is paired and playing audio.
- If using AUX or MIC, ensure the external device is connected and functioning correctly.
- Probleme mit der Bluetooth-Verbindung:
- Stellen Sie sicher, dass amplifier is in Bluetooth pairing mode (blue light flashing).
- Make sure your Bluetooth device is within the 30+ feet wireless range.
- Forget the 'Herdio' device from your smart device's Bluetooth settings and attempt to re-pair.
- Starten Sie beide Geräte neu. ampVerstärker und Ihr Bluetooth-Gerät.
- Verzerrter Klang:
- Verringern Sie die Lautstärke an beiden Stellen. ampVerstärker und Ihr Audio-Quellgerät.
- Prüfen Sie die Lautsprecherkabelanschlüsse auf lose Drähte oder Kurzschlüsse.
- Ensure the audio source is not overdriven or producing distorted signals.
Technische Daten
| Marke | Herdio |
| Modellname | HCS 818 |
| Lautsprechertyp | Tieftöner, Hochtöner |
| Lautsprechergröße | 6.5 Zoll |
| Maximale Lautsprecherausgangsleistung | 320 Watt |
| Impedanz | 8 Ohm |
| Frequenzgang | 20 KHz (Note: This is likely the upper limit, typical range is broader) |
| Konnektivitätstechnologie | Aux-Anschluss, Bluetooth, USB |
| Drahtlose Kommunikationstechnologie | Bluetooth |
| Bluetooth-Reichweite | 30 Fuß |
| Eingangslautstärketage | 120 Volt |
| Stromquelle | Kabelgebundene Elektrik |
| Montagetyp | Unterputzmontage, Deckenmontage |
| Produktabmessungen (Amplifizierer) | 9.25"D x 9.25"W x 4.13"H (Note: This dimension seems to be for the speaker, not the ampschwerer. Amplifier is typically smaller, as shown in images.) |
| Material | Acrylnitril-Butadien-Styrol (ABS) |
| Ist wasserdicht | FALSCH (Nicht wasserfest) |
| Artikelgewicht | 9.08 Pfund (Gesamtgewicht des Pakets) |
Garantieinformationen
The Herdio 6.5-inch Bluetooth Ceiling Speakers with In-Wall AmpDer lifier verfügt über eine Eingeschränkte Garantie. For specific details regarding warranty coverage, duration, and claims process, please refer to the warranty card included in your package or contact Herdio customer support directly.
Unterstützung
For further assistance, technical support, or inquiries regarding your Herdio product, please visit the official Herdio website or contact their customer service department. Contact information can typically be found on the product packaging or on the Herdio webWebsite.