Einführung
Thank you for choosing the FLYLINKTECH Car Jump Starter with Air Compressor. This versatile device is designed to provide emergency jump-starting for vehicles, inflate tires, and serve as a portable power bank and LED light source. Please read this manual thoroughly before use to ensure safe and optimal operation.
Produkt überview
The FLYLINKTECH CF700 is a multi-functional device combining a powerful jump starter, a 150 PSI air compressor, a 24000mAh power bank, and an emergency LED light. It is suitable for all gas engines and diesel engines up to 8.0L.
Figure 1: What's in the Box - The jump starter unit, smart jumper cables, air hose with various nozzles, USB charging cable, and carrying case.
Hauptmerkmale
- Battery Starter: 2500A peak current, 1200A starting current, capable of starting all gas and 8.0L diesel engines.
- Power Bank: 24000mAh capacity with 2 USB outputs (one Quick Charge) and a DC 12-16.8V / 10A port for charging various devices and car accessories.
- Tire Compressor: Powerful 150 PSI inflator with a digital display for setting desired pressure and automatic shut-off. Includes pins for inflating balls, rubber boats, and mats.
- LED-Notleuchte: 5W bright LED light with multiple modes (stable, SOS, strobe) for emergency situations, night breakdowns, or repairs.
- 12V Steckdose: Connects various car accessories such as additional USB chargers or car fans.
- Intelligentes Schutzsystem: Features short circuit protection, high/low temperature protection, reverse connection protection, surge voltage-Schutz, hohe Voltage protection, and over discharge protection.
Abbildung 2: Überview of the multi-functional features of the device.
Sicherheitshinweise
Always follow these safety guidelines to prevent injury or damage to the device and vehicle:
- Lesen Sie alle Anweisungen, bevor Sie das Produkt verwenden.
- Tauchen Sie das Produkt nicht in Wasser.
- Betreiben Sie das Produkt nicht in explosionsgefährdeten Bereichen, beispielsweise in der Nähe von brennbaren Flüssigkeiten, Gasen oder Staub.
- Außerhalb der Reichweite von Kindern aufbewahren.
- Ensure proper polarity connection when jump-starting to avoid sparks and damage. The smart clamp provides protection against reverse connection.
- Do not touch the air hose connector immediately after prolonged inflation, as it may be hot.
Figure 3: The device incorporates multiple safety protections for user and vehicle safety.
Aufstellen
Aufladen des Geräts
Before first use, fully charge the jump starter. Use the provided USB-C charging cable to connect the device to a compatible USB power adapter (not included). The digital display will indicate the charging status. It is recommended to recharge the device every 3-6 months to maintain battery health, even if not in use.
Bedienungsanleitung
1. Starthilfe für Ihr Fahrzeug
- Stellen Sie sicher, dass der Starthilfe-Booster ausreichend geladen ist.
- Connect the smart jumper cables to the jump starter's jumping port.
- Befestigen Sie die rote Klamp an den Pluspol (+) der Fahrzeugbatterie.
- Befestigen Sie die schwarze Klamp an den Minuspol (-) der Fahrzeugbatterie. Der intelligente Steckeramp will indicate a safe connection (e.g., green light).
- Starten Sie den Motor des Fahrzeugs.
- Sobald der Motor anspringt, sofort den Stecker entfernen.amps from the battery, then disconnect the smart jumper cables from the jump starter.
Abbildung 4: Korrekter Anschluss zum Überbrücken eines Fahrzeugs.
Video 1: Demonstration of jump starting a vehicle using a similar device. The video shows connecting the clamps to the battery and starting the car.
2. Reifendruck
- Schrauben Sie den Luftschlauch in den dafür vorgesehenen Anschluss am Starthilfegerät.
- Attach the air hose nozzle securely to the tire valve stem.
- Turn on the device and select the desired pressure unit (PSI, BAR, KPA).
- Use the '+' and '-' buttons to set the target tire pressure.
- Drücken Sie die Starttaste, um mit dem Aufpumpen zu beginnen. Der Kompressor schaltet sich automatisch ab, sobald der voreingestellte Druck erreicht ist.
- Disconnect the air hose from the tire valve and then from the jump starter.
Figure 5: The device connected to a car tire for inflation.
Video 2: A seller demonstration of the car jump starter's air compressor function, showing how to connect and inflate a tire.
3. Verwendung als Powerbank
Connect your electronic devices (phones, tablets, etc.) to the USB output ports or car accessories to the DC 12-16.8V / 10A port for charging.
Figure 6: The device being used to charge multiple electronic devices.
4. Verwendung des LED-Lichts
Press and hold the light button to turn on the LED light. Short presses will cycle through different modes: stable light, SOS signal, and strobe light. Press and hold again to turn off.
Figure 7: The device's LED light providing illumination in a dark setting.
Wartung
- Halten Sie das Gerät sauber und trocken.
- An einem kühlen, trockenen Ort lagern. Vor direkter Sonneneinstrahlung und hohen Temperaturen schützen.
- Recharge the device at least once every 3-6 months to prevent deep discharge and prolong battery life.
- Inspect cables and accessories for any damage before each use.
Fehlerbehebung
| Problem | Mögliche Ursache | Lösung |
|---|---|---|
| Device does not turn on/charge | Battery completely depleted or charging cable/adapter faulty. | Ensure charging cable and adapter are working. Try a different charging source. Allow sufficient time for initial charge. |
| Fahrzeug lässt sich nicht überbrücken | Falsche Klamp connection, insufficient device charge, or vehicle battery severely damaged. | Überprüfen Sie dieamp polarity and ensure secure connection. Fully charge the jump starter. Consult a mechanic if vehicle battery is beyond jump-starting. |
| Luftkompressor pumpt nicht auf | Air hose not securely attached, incorrect pressure setting, or device not powered on. | Ensure air hose is tightly screwed in and nozzle is secure on valve. Verify pressure setting and device power. |
| Air compressor stops prematurely | Preset pressure reached (automatic shut-off). | This is normal operation. Check the current tire pressure. |
Technische Daten
- Marke: FLIEGENLINKTECH
- Modell: CF700
- Spitzenstrom: 2500 A
- Anlaufstrom: 1200 A
- Batteriekapazität: 24000 mAh
- Fahrzeugservicetyp: Passenger Car (All Gas or 8.0L Diesel)
- Luftkompressordruck: 150 PSI
- USB-Ausgang: 2 ports (one Quick Charge)
- DC-Ausgang: 12–16.8 V/10 A
- Artikelgewicht: 5.74 Pfund
- Produktabmessungen: 8.66 x 6.69 x 3.35 Zoll
- Zusammensetzung der Batteriezellen: Lithium-Ionen
- Bandtage: 12 Volt
Garantie und Support
Dieses Produkt wird mit einem 24-Months Global Warranty. FLYLINKTECH is committed to providing Life Time After-sale Service & Technical Support. For any inquiries or assistance, please contact FLYLINKTECH customer service.