PRV AUDIO DSP 2.4X Digitaler Signalprozessor – Benutzerhandbuch

1. Einleitung

Thank you for choosing the PRV AUDIO DSP 2.4X Digital Signal Processor. This device is designed to enhance your car audio system by providing advanced control over sound parameters. It features digital crossover functions, graphic and parametric equalization, alignment, phase inversion, limiting, and a built-in audio generator. This manual provides essential information for proper installation, operation, and maintenance of your DSP 2.4X.

2. Sicherheitshinweise

Please read all safety instructions before installing and operating the DSP 2.4X. Failure to follow these guidelines may result in injury or damage to the device or vehicle.

• Professionelle Installation empfohlen: Installation should be performed by qualified personnel to ensure correct wiring and setup.
• Stromabschaltung: Always disconnect the vehicle's battery negative terminal before making any electrical connections.
• Richtige Verdrahtung: Ensure all wiring is correctly connected according to the diagrams provided. Use appropriate gauge wires for power and remote connections.
• Belüftung: Install the unit in a location with adequate ventilation to prevent overheating.
• Feuchtigkeit und Hitze: Avoid exposing the unit to moisture, water, or extreme temperatures.
• Sichere Montage: Mount the unit securely to prevent movement during vehicle operation.

3. Packungsinhalt

Überprüfen Sie, ob alle Artikel im Paket vorhanden sind:

• PRV AUDIO DSP 2.4X Digital Crossover and Equalizer
• Benutzerhandbuch (dieses Dokument)
• Montagezubehör (falls enthalten)

4. Produktüberschreitungview

The PRV AUDIO DSP 2.4X is a compact yet powerful digital signal processor designed for car audio systems. It features a user-friendly interface with an LCD display and a main control knob for real-time adjustments.

Bild 4.1: Spitze view of the PRV AUDIO DSP 2.4X Digital Signal Processor. This image shows the main control knob, LCD display, input/output selection buttons, and the remote output sequencer terminals.

Bild 4.2: Front view of the PRV AUDIO DSP 2.4X, highlighting the RCA input (A, B) and output (1, 2, 3, 4) connections.

Bild 4.3: Seite view of the PRV AUDIO DSP 2.4X, showing the power (+BAT), ground (GND), and remote input (REM IN) terminals, along with the remote output sequencer (AMP S1, S2, S3) terminals.

5. Einrichtung und Installation

5.1 Kabelverbindungen

Befolgen Sie diese Schritte für die korrekte Verkabelung:

1. Power (+BAT): Connect the +BAT terminal to the vehicle's positive battery terminal using a fuse (not included) close to the battery.
2. Masse (GND): Connect the GND terminal to a clean, solid chassis ground point in the vehicle.
3. Remote-Eingang (REM IN): Connect the REM IN terminal to the remote output of your head unit or ignition switch. This signal turns the DSP on and off.
4. Audio Inputs (A, B): Connect your head unit's RCA outputs to the DSP's Input A and Input B.
5. Audio Outputs (1, 2, 3, 4): Connect the DSP's RCA outputs (1-4) to the inputs of your amplifizierer.
6. Remote Output Sequencer (AMP S1, S2, S3): These outputs provide sequential triggering for external amplifiers or other accessories. Connect these to the remote input terminals of your amplifizierer.

5.2 Sequencer Feature

The DSP 2.4X includes a built-in sequencer feature that allows for sequential activation and deactivation of connected devices, such as amplifiers, via the remote trigger connection (REM). This helps prevent turn-on/turn-off thumps and protects your audio system components.

• The sequencer has three outputs (S1, S2, S3).
• These outputs are activated and deactivated sequentially based on the REM IN signal.
• The triggering interval between each output can be set from 0s to 4s.
• If the interval is set to 0s, all three outputs will activate/deactivate simultaneously after a 3-second delay from the REM IN signal change.
• Use cables of at least 20 AWG for remote signal connections.

Bild 5.1: Example wiring diagram illustrating the connection of the DSP 2.4X sequencer feature to a radio/player, battery, and multiple amplifizierer.

6. Bedienungsanleitung

The DSP 2.4X is controlled via its LCD display and main control knob.

6.1 Grundlegende Navigation

• Hauptregler: Rotate to navigate menus and adjust values. Press to select an option or confirm a setting.
• LCD Anzeige: Shows current menu, settings, and values.

6.2 Input and Output Management

• Eingangskanäle: The DSP 2.4X has two audio inputs (A and B).
• Ausgangskanäle: It features four independent output channels.
• Quellenauswahl: For each output, you can select the audio source from Input A, Input B, or a combination of A + B.
• Output Select / Hold to Mute: Use the dedicated buttons to select outputs for adjustment or hold to mute.

6.3 Ausgleich

• Grafischer Equalizer: A 15-band graphic equalizer is integrated. You can manually tune it or select from 12 preset options: Flat, Loudness, Bass Boost, Mid Bass, Treble Boost, Powerful, Electronic, Rock, Hip Hop, Pop, Vocal, and Pancadão.
• Parametrischer Equalizer: Features one input and one output parametric equalizer. This allows for fine adjustments with gain control, specific frequency setting, and adjustable equalizer bandwidth.

6.4 Digital Crossover

The digital crossover allows precise frequency distribution to different speakers.

• Configure high-pass, low-pass, and band-pass filters for each output channel independently.
• Adjust filter slopes and types (e.g., Butterworth, Linkwitz-Riley).

6.5 Other Controls

• Begrenzer: Protects speakers from over-excursion by limiting the output signal level.
• Alignment (Delay): Adjust time alignment for each output channel to ensure all sound waves reach the listener simultaneously.
• Phasenumkehr: Invert the phase of individual output channels to correct acoustic cancellations.
• Audiogenerator: Built-in audio generator for system testing and tuning.

7. Wartung

The PRV AUDIO DSP 2.4X requires minimal maintenance.

• Reinigung: Reinigen Sie die Außenseite des Geräts mit einem weichen, trockenen Tuch. Verwenden Sie keine scharfen Chemikalien oder Scheuermittel.
• Verbindungen: Überprüfen Sie regelmäßig alle Kabelverbindungen, um sicherzustellen, dass sie sicher und korrosionsfrei sind.
• Belüftung: Ensure that the ventilation openings are not blocked to allow for proper heat dissipation.

8. Fehlerbehebung

If you encounter issues with your DSP 2.4X, refer to the following table for common problems and solutions.

9. Spezifikationen

10. Garantie und Support

PRV AUDIO products are manufactured to high-quality standards. For warranty information, technical support, or service inquiries, please refer to the warranty card included with your product or visit the official PRV AUDIO webWebsite.

WebWebsite: www.prvaudio.com (This is a placeholder link, please verify the actual webWebsite für Support.)