Daytech Panic Button Alarm System User Manual

1. Einleitung

The Daytech Panic Button Alarm System is designed to provide immediate alert capabilities for various security needs, including home care, business security, and emergency situations. This system features a loud 120dB siren with a flashing strobe light, activated by wireless panic buttons or remote controls. It is suitable for indoor and outdoor use, offering reliable performance with a built-in battery for power outage Schutz.

2. Packungsinhalt

Überprüfen Sie, ob alle Komponenten in Ihrem Paket vorhanden sind:

• 1 x Strobe Siren Alarm Receiver
• 5 x Remote Panic Buttons
• 2 x Call Buttons (Square type)
• Netzteil für Sirene
• Montagezubehör (Schrauben, Dübel)
• Benutzerhandbuch (dieses Dokument)

Bild: Überview of the Daytech Panic Button Alarm System components, showing the siren, a square call button, and a remote control.

3. Hauptmerkmale

• Wireless Outdoor/Indoor Siren: Produces a 120dB sound and flashing strobe light upon activation.
• Erweiterte Reichweite: Call buttons and receiver operate up to 330 feet in open areas, 130 feet with obstacles. Remote controls have an operating range of 65 feet to the receiver.
• Macht Outage Schutz: Features a built-in battery providing approximately 10 hours of standby time, ensuring continuous operation during power interruptions.
• Wasserdichter Panikknopf: The panic buttons are waterproof, allowing installation in areas like washing rooms or near bedsides.
• Cancel/OFF Function: Allows users to deactivate the alarm using a dedicated cancel button on the call unit or the OFF button on the remote.
• Einfache Einrichtung: Units are pre-paired from the factory for immediate use.
• Erweiterbares System: One siren can be paired with up to 8 transmitters (including call buttons and remote controls).

4. Einrichtungsanweisungen

4.1 Erstes Einschalten

1. Packen Sie alle Komponenten aus dem Karton aus.
2. Plug the siren alarm receiver into a standard electrical outlet. The unit will emit a short sound to indicate it is powered on.
3. The system is pre-paired for immediate use. Test the system by pressing a panic button or remote to ensure the siren activates.

Image: The Daytech siren alarm plugged into a wall outlet, indicating power connection.

4.2 Pairing Additional Transmitters (Call Buttons/Remotes)

The siren can be paired with up to 8 transmitters. Follow these steps to pair new devices:

1. Locate the "Set Button" on the back of the siren receiver.
2. Press and hold the "Set Button" until the siren emits a short beep, indicating it is in pairing mode.
3. Within 10 seconds, press the "CALL" button on the new call button or the "ON" button on the new remote control.
4. The siren will emit another beep to confirm successful pairing.
5. Wiederholen Sie den Vorgang für jeden weiteren Sender.
6. To exit pairing mode, wait 10 seconds without pressing any transmitter, or press the "Set Button" again.

Image: Close-up of the back of the siren unit, highlighting the "Set Button" for pairing.

4.3 Mounting the Call Buttons

The call buttons can be fixed to a wall or placed on a flat surface.

• For wall mounting, use the provided screws and anchors. Ensure the button is easily accessible in an emergency.
• The waterproof design allows installation in bathrooms or other areas where moisture may be present.

Image: A panic button being tested with water spray, demonstrating its waterproof feature.

5. Bedienungsanleitung

5.1 Aktivierung des Alarms

• Using a Call Button: Press the large "CALL" button on the square call unit. This will send a signal to the siren, activating the alarm sound and flashing lights.
• Verwendung einer Fernbedienung: Press the "ON" button on the remote control. This will activate the siren.

Image: A hand pressing the call button, illustrating alarm activation.

5.2 Deactivating the Alarm

• Using a Call Button: Press the small "CANCEL" button on the square call unit. This will silence the siren.
• Verwendung einer Fernbedienung: Press the "OFF" button on the remote control. This will deactivate the siren.

Image: A hand pressing the "OFF" key on a remote control to cancel the alarm.

5.3 Stromaustage Funktionalität

The siren receiver includes a built-in battery that provides approximately 10 hours of standby power. In the event of a power outage, the system will automatically switch to battery power, ensuring continued operation.

Image: Illustration showing the siren alarm operating on its built-in battery during a power outage, with a 10-hour standby time.

6. Wartung

6.1 Battery Renewal for Call Units

The call units (panic buttons) are powered by a 1*23A 12V battery. When the battery is low, the unit's performance may degrade.

1. Carefully open the call unit casing using a small flat-head screwdriver or similar tool.
2. Remove the old 1*23A 12V battery.
3. Insert a new 1*23A 12V battery, ensuring correct polarity.
4. Schließen Sie das casing sicher.

Image: Diagram illustrating the internal components of the call button and the 1*23A 12V battery.

6.2 Reinigung

Wipe the surfaces of the siren and transmitters with a soft, dry cloth. Avoid using abrasive cleaners or solvents.

7. Fehlerbehebung

8. Spezifikationen

• Marke: Daytech
• Modellnummer: Model 1 (JH003 8-2)
• Energiequelle: Battery Powered (Siren has built-in battery for backup)
• Kontrollmethode: Fernbedienung
• Geräuschpegel: 120 Dezibel
• Maximum Range (Call Button to Siren): 330 Feet (open areas), 130 Feet (with obstacles)
• Maximum Range (Remote to Siren): 65 Fuß
• Montageart: Door Mount (for siren), Wall Mount/Surface (for call buttons)
• UPC: 762102193270

Image: Detailed diagram showing the dimensions and key features of the siren, call button, and remote control.

9. Garantie und Support

Daytech products are covered by a manufacturer's warranty. For specific warranty details, technical support, or customer service inquiries, please refer to the contact information provided with your purchase or visit the official Daytech webWebsite.

Hersteller: Daytech co.,Ltd.