tectake Bar Table with 4 Stools - Industrial Style

Einführung

Thank you for choosing the tectake Industrial Style Bar Table with 4 Stools. This manual provides important information for the safe assembly, operation, and maintenance of your new furniture set. Please read these instructions carefully before assembly and keep them for future reference.

Sicherheitshinweise

• Vor der Montage sicherstellen, dass alle Komponenten vorhanden und unbeschädigt sind. Nicht verwenden, wenn Teile fehlen oder beschädigt sind.
• Montieren Sie das Produkt auf einer weichen, sauberen Oberfläche, um Kratzer zu vermeiden.
• Ziehen Sie alle Schrauben und Bolzen fest an, aber nicht zu fest, um eine Beschädigung des Materials zu vermeiden.
• Überprüfen Sie regelmäßig alle Verbindungen, um sicherzustellen, dass sie fest sitzen.
• Do not exceed the maximum load capacity for the table (75 kg) and stools (150 kg per stool).
• Halten Sie Kleinteile und Verpackungsmaterialien von Kindern fern, um Erstickungsgefahr zu vermeiden.
• This product is designed for indoor use. Avoid prolonged exposure to moisture or direct sunlight.

Packungsinhalt

Before starting assembly, please verify that all the following components are included in your package:

• 1 x Bartisch
• 4 x Barhocker
• 1 x Set of Assembly Hardware (screws, bolts, Allen key, etc.)
• 1 x Montageanleitung (dieses Dokument)

Image: Detailed diagram of product dimensions and included components.

Montageanleitung

Follow these steps carefully to assemble your tectake bar table and stools. It is recommended to have two people for assembly.

1. Komponenten auspacken: Carefully remove all parts from the packaging and lay them out on a clean, soft surface to avoid scratches. Identify each component using the parts list in the assembly hardware set.
2. Tischgestell zusammenbauen: Attach the table legs to the long and short crossbars using the provided screws and Allen key. Ensure all connections are finger-tight before fully tightening.
3. Tischplatte anbringen: Place the tabletop upside down on a soft surface. Align the assembled table frame with the pre-drilled holes on the underside of the tabletop. Secure the tabletop to the frame using the appropriate screws.
4. Assemble Stool Frames: For each stool, attach the four legs to the seat frame using the provided screws. Ensure the footrests are correctly oriented.
5. Hockersitze anbringen: Place each stool seat upside down. Align the assembled stool frame with the pre-drilled holes on the underside of the seat. Secure the seat to the frame.
6. Verstellbare Füße montieren: Screw the adjustable plastic feet into the bottom of each table leg and stool leg. These feet protect your floor and allow for minor height adjustments to ensure stability.
7. Abschließendes Anziehen: Once all components are assembled, carefully place the table and stools upright. Systematically tighten all screws and bolts using the Allen key. Do not overtighten.

Image: Stable feet with screw-in adjusters and resistant MDF tabletops.

Image: Features including adjustable feet and space-saving stool storage.

Bedienungsanleitung

The tectake bar table and stools are designed for daily use in your home. Here are some guidelines for optimal use:

• Stabilität: Use the adjustable plastic feet on both the table and stools to compensate for uneven floors. Turn the feet clockwise or counter-clockwise until the furniture is stable and does not wobble.
• Platzsparend: The stools are designed to fit neatly under the table when not in use, maximizing your floor space.
• Tragfähigkeit: Do not place items heavier than 75 kg on the table. Each stool can support a maximum weight of 150 kg.
• Platzierung: Position the furniture on a flat, stable surface. Avoid placing it near heat sources or in direct sunlight for extended periods to prevent material damage.

Image: tectake bar table and stools in use.

Wartung

Proper care will extend the life and appearance of your tectake furniture set:

• Reinigung: Wipe surfaces with a dry cloth. For more stubborn marks, use a slightly damp cloth and mild detergent, then dry immediately with a clean, dry cloth. Avoid abrasive cleaners or harsh chemicals.
• Regelmäßige Kontrollen: Überprüfen Sie regelmäßig alle Schrauben und Bolzen auf festen Sitz. Ziehen Sie sie gegebenenfalls nach.
• Schutz: Verwenden Sie Untersetzer oder Platzsets, um die Tischplatte vor Verschüttetem, Hitze und Kratzern zu schützen.
• Umfeld: Keep the furniture in a dry environment. Avoid extreme temperature changes and high humidity.

Fehlerbehebung

If you encounter any issues with your tectake bar table and stools, please refer to the following common solutions:

• Wackeliger Tisch/Hocker:
  • Check if all screws and bolts are securely tightened.
  • Adjust the plastic feet on the bottom of the legs to level the furniture on uneven surfaces.
• Schwierigkeiten bei der Montage:
  • Ensure you are using the correct hardware for each step as indicated in the assembly instructions.
  • Do not overtighten screws until all parts are loosely fitted, then tighten them gradually.
  • Refer to the assembly diagrams for correct orientation of parts.
• Kratzer oder Dellen:
  • Minor scratches on the MDF surface can sometimes be minimized with furniture polish or a touch-up pen matching the wood finish.
  • Um zukünftige Schäden zu vermeiden, sollten Sie Schutzpads unter die auf dem Tisch platzierten Gegenstände legen.

Technische Daten

Garantie und Support

tectake products are manufactured to high-quality standards. While specific warranty details are not provided in this manual, please retain your proof of purchase for any warranty claims.

For technical support, missing parts, or any questions regarding your product, please contact tectake customer service through their official website or the retailer where you purchased the product. Please have your model number (404306) and purchase date ready when contacting support.

You can visit the tectake store for more information: tectake Official Store