ResMed AirFit F30i Standard Frame System User Manual

1. Einleitung

The ResMed AirFit F30i Standard Frame System is designed as a replacement component for the ResMed AirFit F30i full-face CPAP mask. This frame system is engineered to provide a relaxed fit and optimize sleep apnea therapy by keeping the air tubing out of the way with its top-of-head connection. Please note that this product includes only the frame system; headgear is not included.

Image 1: The ResMed AirFit F30i Standard Frame System, designed to complement your existing CPAP setup.

2. Wichtige Sicherheitsinformationen und Warnhinweise

WARNUNG: Risiko magnetischer Störungen

Keep the mask magnets at a safe distance of at least 6 inches (150 mm) away from implants or medical devices that may be adversely affected by magnetic interference. This warning applies to you or anyone in close physical contact with your mask. The magnets are located in the frame and lower headgear clips, with a magnetic field strength of up to 400mT. While designed to secure the mask, they may inadvertently detach during sleep.

Kontraindikationen:

Masks with magnetic components are contraindicated for use by patients, or anyone in close physical contact while using the mask, who have the following:

• Aktive medizinische Implantate, die mit Magneten interagieren (z. B. Herzschrittmacher, implantierbare Kardioverter-Defibrillatoren (ICD), Neurostimulatoren, Liquorshunts, Insulin-/Infusionspumpen).
• Metallische Implantate/Gegenstände, die ferromagnetisches Material enthalten (z. B. Aneurysmaclips/Flussunterbrechungsgeräte, Embolisationsspiralen, Stents, Ventile, Elektroden, Implantate zur Wiederherstellung des Hör- oder Gleichgewichtssinns mit implantierten Magneten, Augenimplantate, Metallsplitter im Auge).

3. Produktkomponenten

The AirFit F30i Frame System consists of the flexible frame that connects the cushion to the air tubing. It features a tube-up design for enhanced freedom of movement. This system is a replacement part and does not include the mask cushion or headgear, which must be purchased separately or used from your existing AirFit F30i mask.

Abbildung 2: Explosionszeichnung view of the AirFit F30i Frame System, showing the frame and cushion connection points. Headgear is not included.

4. Aufbau und Montage

To set up your ResMed AirFit F30i Standard Frame System, follow these steps:

1. Größe überprüfen: Before assembly, ensure you have the correct cushion size and frame size for your mask. The frame system is designed to fit specific cushion sizes.
2. Kissen anbringen: Carefully align the cushion with the frame system and press them together until they securely click into place. Ensure a snug fit to prevent air leaks.
3. Connect Headgear: If you are using existing headgear, attach it to the designated connection points on the frame system. Adjust the headgear straps for a comfortable and secure fit without overtightening.
4. Schlauch anschließen: Attach your CPAP machine's air tubing to the top-of-head connection port on the frame system.

Image 3: Illustration emphasizing the importance of confirming both cushion and frame sizes for proper fit.

5. Bedienungsanleitung

Once assembled, place the mask on your face and adjust the headgear to achieve a comfortable seal. The top-of-head tube connection allows for greater freedom of movement during sleep, as the air tubing is kept away from your body. Ensure the mask is not too tight, as this can cause discomfort and pressure marks, or too loose, which can lead to air leaks.

Image 4: A user demonstrating the AirFit F30i mask, highlighting the tube-up design that allows for various sleep positions.

6. Wartung und Pflege

Proper maintenance ensures the longevity and effectiveness of your AirFit F30i frame system. Follow these daily care instructions:

• Tägliche Reinigung: If required, gently wipe the outside of the foam components with CPAP wipes or similar alcohol-free wipes.
• Trocknen: Lay the frame system flat on a clean towel to air dry completely before next use.

Important Care Notes:

• ✘ Do not expose to direct sunlight.
• ✘ Do not put in a dishwasher or washing machine.
• ✘ Do not use alcohol or bleach to clean.

Image 5: Visual guide for daily care of the AirFit frame system, including what to do and what to avoid.

Austauschplan:

It is recommended to replace your frame system every 3 months. Consider replacing sooner if you observe any of the following signs:

• Sie haben übermäßige Leckagen.
• Ihre Therapie scheint weniger wirksam zu sein als sonst.
• The frame system starts to show visible wear and tear (e.g., cracks, discoloration, loss of elasticity).

Image 6: Recommendation to replace the frame system every 3 months, along with signs indicating a need for replacement.

7. Fehlerbehebung

If you encounter issues with your AirFit F30i frame system, consider the following:

• Übermäßige Leckagen: Check if the cushion is properly seated within the frame. Inspect the frame and cushion for any signs of damage or wear. Ensure headgear is adjusted correctly, not too loose or too tight. Refer to the replacement schedule if components are old.
• Discomfort or Pressure Marks: Re-adjust the headgear to ensure it is not overtightened. The frame should sit comfortably on your face without causing undue pressure.
• Reduced Therapy Effectiveness: This could indicate leaks or general wear of the mask components. Inspect all parts for deterioration and consider replacing the frame system or cushion as per the recommended schedule.

Bei anhaltenden Problemen wenden Sie sich bitte an Ihren Arzt oder kontaktieren Sie den Kundendienst von ResMed.

8. Spezifikationen

9. Garantie und Support

For information regarding the warranty of your ResMed AirFit F30i Standard Frame System, please refer to the documentation provided with your original purchase or visit the official ResMed website. For technical support, replacement parts, or further assistance, please contact ResMed customer service or your authorized ResMed dealer.