Sunco Lighting DL_DK56-15W-3K_65K-12PK

Sunco 6-Inch LED Flush Mount Disc Light Instruction Manual

Model: DL_DK56-15W-3K_65K-12PK

1. Einleitung

This manual provides comprehensive instructions for the safe installation, operation, and maintenance of your Sunco 6-Inch LED Flush Mount Disc Lights. Please read this manual thoroughly before installation and retain it for future reference.

2. Sicherheitshinweise

  • WARNUNG: Stromschlaggefahr. Vor Installation oder Wartung die Stromzufuhr an der Sicherung oder dem Leitungsschutzschalter unterbrechen.
  • Die Installation muss von einem qualifizierten Elektriker gemäß den nationalen und lokalen Elektrovorschriften durchgeführt werden.
  • Die Vorrichtung darf nicht verändert oder modifiziert werden.
  • Sicherstellung der Versorgungsvoltage ist mit den Anforderungen der Leuchte (120 Volt) kompatibel.
  • Do not handle live wires with bare hands.
  • Dieses Produkt ist Damp Bewertet, suitable for use in bathrooms and other damp locations, but not directly exposed to water.

3. Lieferumfang

Each Sunco 6-Inch LED Flush Mount Disc Light package includes the following components:

  • LED Disc Light Fixture (12 units per pack)
  • TP24-Anschluss
  • E26 Adapter
  • Spring Clips (pre-attached or included for installation)
  • Drahtmuttern
  • Befestigungsschrauben
  • Bedienungsanleitung
Explodierte view of Sunco LED Disc Light components including friction springs, screws, LED board, and anti-yellowing lens.
Abbildung 1: Explodierte view of the LED Disc Light showing its components: friction springs, included screws, energy-saving LED board, and anti-yellowing lens.

4. Installationsanweisungen

The Sunco LED Disc Light offers versatile installation options for both recessed cans (5-inch or 6-inch) and junction boxes.

4.1. Erforderliches Werkzeug

  • Schraubendreher
  • Wire Strippers (if connecting to junction box)
  • Schutzbrille

4.2. Recessed Can Installation (5-inch or 6-inch)

  1. Strom ausschalten: Ensure power to the fixture is OFF at the circuit breaker.
  2. Remove existing trim: Carefully remove the existing bulb and trim from the recessed can.
  3. Connect E26 adapter: Screw the provided E26 adapter into the existing socket of the recessed can.
  4. Connect TP24 connector: Plug the TP24 connector from the disc light into the E26 adapter's connector.
  5. Adjust spring clips: The spring clips on the disc light can be adjusted for 5-inch or 6-inch cans. Ensure they are set to the correct position for your can size.
  6. Einbauvorrichtung: Gently push the LED disc light into the recessed can until the spring clips secure it flush with the ceiling.
Diagram showing installation of Sunco LED Disc Light into a recessed can with TP24 connection and adjustable spring clips.
Abbildung 2: Illustration of the LED Disc Light installation into a recessed can, highlighting the TP24 connector and adjustable spring clips for 5-6 inch cans.

4.3. Installation der Anschlussdose

  1. Strom ausschalten: Ensure power to the junction box is OFF at the circuit breaker.
  2. Prepare wires: Strip the ends of the black (live), white (neutral), and green/bare copper (ground) wires from the junction box, if necessary.
  3. Drähte anschließen: Use the provided wire nuts to connect the corresponding wires:
    • Black fixture wire to Black junction box wire.
    • White fixture wire to White junction box wire.
    • Green/Yellow fixture wire to Green/Bare Copper junction box wire.
  4. Sichere Befestigung: Use the provided mounting screws to attach the disc light's base directly to the junction box.
  5. Diffusor anbringen: Twist the diffuser onto the fixture base until securely fastened.
Image showing the three ways to install the Sunco LED Disc Light: into a J-Box with wire nuts, or into an E26 can connection.
Abbildung 3: Visual guide for installing the LED Disc Light, including options for J-Box and E26 can connections.

Video 1: Überview of Sunco 5/6-inch LED Disc Light installation, demonstrating both recessed can and junction box methods.

5. Bedienungsanleitung

5.1. Ein-/Ausschalten

Once installed, restore power at the circuit breaker. The light can be turned on or off using a standard wall switch.

5.2. Wählbare Farbtemperatur (CCT)

This fixture features a selectable CCT switch located on the back of the light. Before final installation, select your desired color temperature from the available options: 3000K (Warm White), 4000K (Cool White), 5000K (Daylight), 6000K (Daylight Deluxe), or 6500K (Daylight Deluxe).

Close-up of the CCT selection switch on the back of the LED Disc Light.
Abbildung 4: The CCT switch allows selection of various color temperatures.

Video 2: Demonstration of the selectable color temperature feature on the Sunco 6-inch LED Disc Light.

5.3. Dimmfunktion

The Sunco LED Disc Light is dimmable from 10% to 100% with compatible LED dimmers. Refer to the compatibility list below for recommended dimmer models.

Image illustrating the dimming range of the LED Disc Light from 10% to 100% with a dimmer switch.
Abbildung 5: The LED Disc Light supports dimming from 10% to 100% with compatible dimmers.

Kompatible Dimmer:

MarkeModellMarkeModell
LutronMACL-153MLutronNLV-1000-LA
LutronDVCL-153PLutronSLV-600P
LutronPD-6WCL-WH-PLutronRRD-6CL
LutronMACL-153MHLutronAYCL-153P
LutronTGCL-153PLutronP-PKG1WB
LutronDVCL-15PRLEVITON6674 W
LutronCTCL-153PDHLEVITON6672 W
LutronP-PKG1WLEVITONIPL06 600W
LutronDVELV-300PLEVITONDW6HD-1BZ
LEVITONDSL06-001-1LZLEVITONRHCL453PW
LEVITONIPL06-011-10ZEATONSAL06P3
LEVITON06674-002-10WWEMOF7C05
LEVITONTSM10-012-1LWTP-LINKKASA SMART HS220
LEVITONRDL06-001-10ZWATTSTOPPERDCD267
LEVITONDSE06-001-10ZCLOUD BAYCBLD001WH
LEVITONDDMX1-011-BLZ
LEVITONDDE06-BLZ 600W
LEVITONSICHERHEITSLIDE

6. Wartung

The Sunco LED Disc Light is designed for long-lasting performance with minimal maintenance. The LED components are non-removable.

  • Reinigung: Vor der Reinigung unbedingt den Strom abschalten. Wischen Sie die Leuchte mit einem weichen, fusselfreien Tuch ab.amp Tuch. Keine Scheuer- oder Lösungsmittel verwenden.
  • Lampenwechsel: Diese Leuchte verwendet integrierte LEDs und benötigt keinen Glühbirnenwechsel.

7. Fehlerbehebung

ProblemMögliche UrsacheLösung
Licht geht nicht an.Kein Strom am Gerät.
Wackelkontakt.
Fehlerhafter Schalter.
Leistungsschalter prüfen.
Stellen Sie sicher, dass alle Kabelverbindungen sicher sind.
Testen oder ersetzen Sie den Schalter.
Das Licht flackert oder wird unerwartet dunkler.Inkompatibler Dimmerschalter.
Lose Verkabelung.
Bandtage Schwankungen.
Ensure dimmer is on the compatible list.
Überprüfen und sichern Sie alle Kabelverbindungen.
Lassen Sie sich bezüglich der Lautstärke von einem Elektriker beraten.tage-Probleme.
Falsche Farbtemperatur.Der CCT-Schalter ist falsch eingestellt.Adjust the CCT switch on the back of the fixture to the desired setting.

8. Spezifikationen

BesonderheitDetail
MarkeSunco Beleuchtung
ModellnummerDL_DK56-15W-3K_65K-12PK
Größe6 Zoll
Wastage15 W (entspricht 75 W)
Helligkeit1050 Lumen
Farbtemperatur (CCT)Wählbar: 3000K, 4000K, 5000K, 6000K, 6500K
DimmbarJa (10–100 %)
Bandtage120 Volt
CRI90+
Durchschnittliches Leben50,000 Stunden
MaterialAluminium, Polycarbonat
InstallationstypFlush Mount, Recessed (E26/TP24)
Damp BewertetJa
ZertifizierungenETL
Technische Daten7.5 Zoll L x 1 Zoll B x 7.5 Zoll H
Artikelgewicht7.8 Pfund (für die 12er-Packung)

9. Garantie und Support

Sunco Lighting offers a 7 Jahr Schutz warranty on this product. For any questions, technical assistance, or warranty claims, please contact Sunco Lighting customer support. Visit the Sunco Lighting Store für weitere Informationen.

Image showing Sunco's 7-year coverage and reliable customer support.
Abbildung 6: Sunco Lighting provides 7-year coverage and dedicated customer support.

© 2026 Sunco Lighting. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.