1. Sicherheitshinweise
Bitte lesen Sie vor der Verwendung des Produkts alle Sicherheitshinweise sorgfältig durch. Die Nichtbeachtung dieser Hinweise kann zu Stromschlag, Brand oder schweren Verletzungen führen.
- Zerlegen, reparieren oder modifizieren Sie das Produkt nicht.
- Das Produkt sollte von Wasser und hoher Luftfeuchtigkeit ferngehalten werden.
- Stellen Sie sicher, dass das Netzteil mit Ihrer örtlichen Spannung kompatibel ist.tage.
- Do not cover the light with flammable materials.
- Außerhalb der Reichweite von Kindern aufbewahren.
- Sollten Schäden auftreten, stellen Sie die Nutzung sofort ein und kontaktieren Sie den Kundendienst.
2. Packungsinhalt
Überprüfen Sie, ob alle Artikel im Paket vorhanden sind:
- SOAIY LED Bar Light (40cm)
- Netzteil
- Self-adhesive Magnetic Clips (for installation)
- Bedienungsanleitung
Image: SOAIY LED Bar Light, AC adapter, and magnetic clips.
3. Einrichtung und Installation
The SOAIY LED Bar Light is designed for easy, tool-free installation. No electrical work is required.
3.1 Auswählen eines Installationsorts
Select a flat, clean surface such as under a cabinet, shelf, or counter. Ensure there is a power outlet nearby for the AC adapter.
3.2 Installationsschritte
- Bereiten Sie die Oberfläche vor: Clean the desired installation surface thoroughly to ensure the self-adhesive magnetic clips adhere properly.
- Attach Magnetic Clips: Peel the protective film from the self-adhesive side of the magnetic clips. Attach the clips to the chosen surface, ensuring they are spaced appropriately to securely hold the LED bar light.
Image: Applying adhesive to magnetic clips.
- Montieren Sie das Licht: Align the LED bar light with the attached magnetic clips. The magnets will hold the light securely in place.
Image: Attaching the LED light to the magnetic clips.
- Strom anschließen: Plug the AC adapter into the power port on the LED bar light, then plug the adapter into a standard electrical outlet.
Bild: Überview of power connection and installed light.
The magnetic mounting allows for easy removal and reinstallation if needed.
4. Bedienung
The SOAIY LED Bar Light features touchless control for convenience and hygiene.
4.1 Ein-/Ausschalten
- Um das Licht einzuschalten ON: Wave your hand quickly (within 5cm) under the sensor.
- Um das Licht einzuschalten AUS: Wave your hand quickly (within 5cm) under the sensor again.
Image: Demonstrating hand gesture for touchless on/off operation.
4.2 Stufenloses Dimmen
- To adjust brightness: With the light on, hold your hand steadily under the sensor (within 5cm). The brightness will gradually change. Remove your hand when the desired brightness is reached.
- The light will cycle through its brightness range.
Image: Illustrating stepless dimming by holding hand under the sensor.
4.3 Speicherfunktion
The light remembers your last brightness setting. If the power is disconnected and reconnected, the light will turn on at the brightness level it was set to previously.
5. Wartung
To ensure optimal performance and longevity of your SOAIY LED Bar Light, follow these maintenance guidelines:
- Reinigung: Disconnect the power before cleaning. Use a soft, dry cloth to wipe the surface of the light. Do not use abrasive cleaners, solvents, or excessive moisture, as these can damage the product.
- Sensorpflege: Keep the sensor area clean and free from obstructions to ensure proper touchless operation.
- Lagerung: If storing the light for an extended period, disconnect it from power and store it in a cool, dry place.
6. Fehlerbehebung
If you encounter issues with your SOAIY LED Bar Light, refer to the following common problems and solutions:
| Problem | Mögliche Ursache | Lösung |
|---|---|---|
| Licht geht nicht an. | Kein Stromanschluss oder defekter Adapter. | Ensure the AC adapter is securely plugged into both the light and the power outlet. Test the outlet with another device. |
| Touchless sensor is unresponsive. | Sensor obstructed or incorrect hand gesture. | Ensure the sensor area is clean and clear. Use a quick wave for on/off, and hold your hand steadily for dimming, within 5cm of the sensor. |
| Brightness adjustment is erratic. | Interference or sensor issue. | Ensure no other objects are near the sensor during adjustment. Try resetting the power by unplugging and replugging the adapter. |
| Licht flackert. | Instabile Stromversorgung oder interner Fehler. | Check power connection. If flickering persists, discontinue use and contact customer support. |
If the problem persists after trying these solutions, please contact SOAIY customer support.
7. Spezifikationen
| Besonderheit | Detail |
|---|---|
| Marke | SOAIY |
| Modellnummer | SSDT40 |
| Lamp Typ | LED |
| Schaltertyp | Berührungsloser Sensor |
| Technische Daten | 43.1 x 7.1 x 5.4 cm (approx. 40cm length) |
| Produktgewicht | 0.22 kg |
| Grundmaterial | Plastik |
| Stromquelle | Netzteil (im Lieferumfang enthalten) |
| Dimmen | Stufenloses Dimmen |
| Besondere Merkmale | Memory Function, Easy Installation (Magnetic) |
Image: Diagram showing product dimensions (40cm length).
8. Garantie und Support
SOAIY products are manufactured with high-quality standards. For warranty information or technical support, please refer to the warranty card included in your package or contact SOAIY customer service through your retailer.
Please have your model number (SSDT40) and purchase date ready when contacting support.