Keychron V5 Kabelgebundene kundenspezifische mechanische Tastatur

Einführung

This manual provides detailed instructions for the setup, operation, maintenance, and troubleshooting of your Keychron V5 Wired Custom Mechanical Keyboard. The Keychron V5 is a 96% layout keyboard featuring QMK/VIA programmability, hot-swappable switches, double-shot PBT keycaps, and compatibility with macOS, Windows, and Linux systems.

Packungsinhalt

Bitte überprüfen Sie, ob alle Artikel in Ihrem Paket vorhanden sind:

• Keychron V5 Kabelgebundene kundenspezifische mechanische Tastatur
• USB-C-auf-USB-C-Kabel
• USB-A zu USB-C Adapter
• Tastenkappenabzieher
• Abzieher wechseln
• Additional Keycaps for Windows/macOS

Aufstellen

Anschließen der Tastatur

To connect your Keychron V5 keyboard:

1. Suchen Sie den USB-C-Anschluss auf der Rückseite der Tastatur.
2. Connect one end of the provided USB-C to USB-C cable to the keyboard.
3. Connect the other end of the cable to a USB-C port on your computer. If your computer only has USB-A ports, use the provided USB-A to USB-C adapter.
4. Die Tastatur wird von Ihrem Betriebssystem automatisch erkannt.

System Toggle (Mac/Windows)

The Keychron V5 includes a system toggle switch to ensure full compatibility with both macOS and Windows operating systems. This switch is typically located on the back or side of the keyboard.

Zum Wechseln zwischen Betriebssystemen:

1. Locate the 'Win/Mac' toggle switch.
2. Slide the switch to the 'Mac' position for macOS or 'Win' position for Windows.
3. The keyboard will adjust its key mappings accordingly.

Abbildung: Seite view of the Keychron V5 keyboard, highlighting the system toggle switch and USB-C port for system compatibility.

Ergonomic Angle Adjustment

The keyboard features adjustable feet to customize the typing angle for improved ergonomics.

To adjust the typing angle:

1. Flip the keyboard over to access the feet on the underside.
2. Gently pull out the feet to extend them to your desired angle. There are usually two levels of adjustment.

Image: The Keychron V5 keyboard with its adjustable feet extended, demonstrating the ergonomic angle design.

Bedienungsanleitung

Hauptfunktionen und Layout

The Keychron V5 features a 96% layout with 97 keys, efficiently retaining function keys and a num pad while saving desk space. The keyboard comes with pre-installed double-shot PBT keycaps in an OSA profile, designed for a comfortable fingertip feel and excellent oil resistance.

Abbildung: Ein vollständiges view of the Keychron V5 keyboard, showcasing its 96% layout and keycap design.

QMK/VIA Customization

The Keychron V5 supports QMK/VIA firmware, allowing for comprehensive customization of key mappings, macros, and backlight effects. VIA is a graphical user interface that simplifies the programming process.

So passen Sie Ihre Tastatur an:

1. Download the VIA software from the official Keychron webWebsite oder das VIA GitHub-Repository.
2. Connect your keyboard to your computer.
3. Launch the VIA software. The software should automatically detect your Keychron V5.
4. Use the intuitive interface to remap keys, create macros, and adjust lighting settings across multiple layers.

For detailed instructions on using QMK/VIA, refer to the official Keychron documentation or community guides.

Image: A visual representation of the VIA software interface, demonstrating how users can customize key layouts and macros for the Keychron V5.

Programmable Knob

The Keychron V5 features a programmable rotary knob, which can be customized via QMK/VIA to control various functions such as volume, zoom, or scrolling.

To customize the knob's function:

1. Open the VIA software.
2. Navigate to the knob customization section.
3. Assign desired functions for clockwise rotation, counter-clockwise rotation, and pressing the knob.

Bild: Eine Nahaufnahme view of the programmable rotary knob on the Keychron V5 keyboard, highlighting its textured surface.

Hot-Swap-fähige Switches

The Keychron V5 is equipped with hot-swappable sockets, allowing you to change mechanical switches without soldering. It supports most 3-pin and 5-pin MX mechanical switches (e.g., Cherry, Gateron, Kailh, Panda).

The keyboard comes with pre-lubed K Pro Red linear switches, offering a smooth and responsive typing experience with a lifespan of up to 50 million keystrokes.

Bild: Eine detaillierte view of the hot-swappable mechanical switches on the Keychron V5 keyboard, illuminated by RGB backlighting.

Hintergrundbeleuchtung

The V5 features south-facing RGB backlighting, designed to better illuminate the keyboard from the typist's angle and prevent interference when using Cherry-profile keycaps. You can customize the backlight effects and colors using the VIA software.

Image: A close-up of the double-shot PBT keycaps on the Keychron V5 keyboard, showcasing their texture and legends.

Wartung

Reinigung

Um die Sauberkeit und Langlebigkeit Ihrer Tastatur zu erhalten:

• Tastenkappen: Use a keycap puller to remove keycaps. Clean them with a mild soap solution and a soft cloth, then rinse and dry thoroughly before reattaching.
• Tastaturgehäuse: Wischen Sie das Tastaturgehäuse mit einem weichen, fusselfreien Tuch ab.amp Tuch. Vermeiden Sie die Verwendung aggressiver Chemikalien oder scheuernder Materialien.
• Staub: Verwenden Sie Druckluft, um Staub und Schmutz zwischen den Tastenkappen und Schaltern zu entfernen.

Austausch des Schalters

Zum Austauschen eines Schalters:

1. Entfernen Sie mithilfe des mitgelieferten Tastenkappenabziehers vorsichtig die Tastenkappe von dem Schalter, den Sie ersetzen möchten.
2. Insert the switch puller tool around the top and bottom clips of the switch.
3. Gently squeeze the clips and pull the switch straight up to remove it from the PCB.
4. Richten Sie die Pins des neuen Schalters an den Löchern auf der Leiterplatte aus. Achten Sie darauf, dass die Pins gerade sind.
5. Drücken Sie den neuen Schalter fest ein, bis er einrastet. Achten Sie darauf, dass er richtig sitzt und nicht verbogen ist.
6. Bringen Sie die Tastenkappe wieder an.

Tastenkappen-Austausch

So tauschen Sie die Tastenkappen aus:

1. Use the keycap puller to gently remove the existing keycap by hooking it onto the keycap and pulling upwards.
2. Align the new keycap with the cross-shaped stem of the switch.
3. Press the new keycap firmly down until it is fully seated.

Fehlerbehebung

• Tastatur reagiert nicht:
  Ensure the USB cable is securely connected to both the keyboard and the computer. Try a different USB port or cable. Verify the system toggle switch is set correctly for your operating system.
• Schlüssel werden nicht registriert:
  If specific keys are not working, the switch might be faulty or not fully seated. Try removing and re-inserting the switch. If the issue persists, replace the switch.
• Probleme mit der Hintergrundbeleuchtung:
  Check VIA software settings to ensure backlighting is enabled and configured correctly. If only certain LEDs are not working, it might indicate a faulty LED or switch.
• QMK/VIA Software Not Detecting Keyboard:
  Ensure the keyboard is connected via USB. Close and reopen the VIA software. Make sure you have the correct firmware loaded if you have flashed custom firmware.
• Keycaps Feel Loose:
  Ensure keycaps are fully pressed onto the switch stems. If a keycap consistently feels loose, the switch stem might be damaged, or the keycap's cross-mount might be worn.

Technische Daten

Garantie und Support

Keychron products are typically covered by a limited warranty. For specific warranty terms, duration, and conditions, please refer to the warranty information provided with your product packaging or visit the official Keychron webWebsite.

For technical support, troubleshooting assistance, or to inquire about replacement parts, please contact Keychron customer service through their official website's support portal. When contacting support, please have your product model (Keychron V5) and purchase details ready.