Einführung
Thank you for choosing the iTOMA CKS213 Digital Alarm Clock. This manual provides detailed instructions for setting up, operating, and maintaining your new alarm clock. Please read this manual thoroughly before use to ensure proper function and to maximize your user experience.
Sicherheitshinweise
- Setzen Sie das Gerät keinen extremen Temperaturen, direkter Sonneneinstrahlung, Staub oder Feuchtigkeit aus.
- Ensure the power adapter is connected to an easily accessible outlet.
- Verwenden Sie ausschließlich das mitgelieferte Netzteil. Die Verwendung nicht autorisierter Netzteile kann das Gerät beschädigen und zum Erlöschen der Garantie führen.
- Halten Sie das Gerät von Wasser oder anderen Flüssigkeiten fern.
- Versuchen Sie nicht, das Gerät zu zerlegen oder zu verändern. Dies kann zu Schäden oder Verletzungen führen.
- The backup battery is for memory retention only; the clock requires main power for full operation.
Packungsinhalt
Bitte prüfen Sie das Paket auf folgende Artikel:
- iTOMA CKS213 Digital Alarm Clock
- Power Adapter (60-inch cable)
- CR2032 Backup Battery (pre-installed or included)
- Benutzerhandbuch (dieses Dokument)
Produkt überview
Familiarize yourself with the various features and controls of your iTOMA CKS213 Digital Alarm Clock.
Aufstellen
1. Stromanschluss
Connect the provided power adapter to the DC input port on the back of the alarm clock, then plug the adapter into a standard wall outlet. The clock display will illuminate.
2. Installing Backup Battery
The clock includes a pre-installed CR2032 battery for backup. This battery preserves time and alarm settings during a power outage. The clock will not operate on battery power alone; it requires main power for the display and alarm functions.
3. Erstzeiteinstellung
Upon initial power connection, the clock may automatically set the time. If manual adjustment is needed, press and hold the 'CLOCK' button located on the top of the unit. Use the 'SETTING+' and 'SETTING-' buttons to adjust the hour and minute. Press 'CLOCK' again to confirm.
4. 12/24-Stunden-Format
To switch between 12-hour and 24-hour time formats, press the '12/24H' button (often integrated with 'CLOCK' or 'SETTING' buttons, refer to the top panel diagram on your device). In 12-hour format, 'AM' or 'PM' indicators will be displayed.
Bedienungsanleitung
1. Setting Dual Alarms (AL1 & AL2)
The iTOMA CKS213 features two independent alarms. Follow these steps to set an alarm:
- Press and hold the 'AL1' or 'AL2' button to enter alarm setting mode. The hour display will flash.
- Use the 'SETTING+' and 'SETTING-' buttons to adjust the desired alarm hour.
- Press 'AL1' or 'AL2' again to confirm the hour and move to minute adjustment. The minute display will flash.
- Use the 'SETTING+' and 'SETTING-' buttons to adjust the desired alarm minute.
- Press 'AL1' or 'AL2' again to confirm the minute and select the alarm mode.
- Use 'SETTING+' or 'SETTING-' to cycle through the 4 alarm modes:
- ALL-7-DAY: Der Wecker ertönt jeden Tag.
- WOCHENTAG: Der Alarm ertönt von Montag bis Freitag.
- WEEKEND: Der Alarm ertönt am Samstag und Sonntag.
- SINGLE DAY: Alarm sounds only on the selected day.
- Press 'AL1' or 'AL2' one last time to save the alarm settings and activate the alarm. An alarm icon will appear on the display.
2. Schlummerfunktion
When an alarm sounds, press the large 'SNOOZE' button on the top of the clock to temporarily silence the alarm for 9 minutes. You can repeat this up to 6 times. To turn off the alarm completely, press the 'AL1 OFF' or 'AL2 OFF' button.
3. Display Brightness and Automatic Dimmer
The clock features a 0.9-inch orange LED display with adjustable brightness. You can manually set the brightness or enable the automatic dimmer function.
- Manuelle Helligkeit: Press the 'DIMMER' button repeatedly to cycle through 3 brightness levels (High, Medium, Low).
- Automatischer Dimmer: The built-in sensor automatically adjusts the display brightness based on ambient light conditions in the room. This feature ensures the display is not too bright in a dark room or too dim in a well-lit environment.
4. Nachtlichtbetrieb
The clock includes a 2-level orange night light. To activate or adjust the night light, locate the 'NIGHT LED' button (or similar) on the top panel and press it to cycle through the brightness levels or turn it off.
5. USB-Ladeanschluss
A USB-A charging port is located on the back of the unit. You can use this port to charge your smartphone or other mobile devices. Connect your device's USB charging cable to this port. The output is typically 1A.
Wartung
- Reinigung: Reinigen Sie die Uhr mit einem weichen, trockenen Tuch. Verwenden Sie keine Scheuermittel oder Lösungsmittel.
- Batteriewechsel: If the backup battery needs replacement, open the battery compartment on the bottom of the unit and replace the CR2032 battery with a new one, observing polarity.
Fehlerbehebung
| Problem | Lösung |
|---|---|
| Die Uhranzeige ist leer. | Ensure the power adapter is securely connected to both the clock and a working wall outlet. Check if the outlet has power. |
| Der Alarm ertönt nicht. | Verify that the alarm is activated (alarm icon visible). Check the alarm time and ensure it is set correctly for the desired day(s) of the week. |
| Der USB-Ladeanschluss funktioniert nicht. | Ensure the clock is powered by the main adapter. Check the USB cable and the device being charged. The port is for charging only, not data transfer. |
| Zeit oder Einstellungen werden nach Stromausfall zurückgesetzttage. | The CR2032 backup battery may be depleted and needs replacement. |
Technische Daten
| Besonderheit | Detail |
|---|---|
| Modellnummer | CKS213 |
| Anzeigetyp | 0.9" Orange LED Digital Display |
| Zeitformat | 12/24 Stunden wählbar |
| Alarm | Dual Alarms with 4 Modes (7-Day, Weekday, Weekend, Single Day) |
| Schlummerdauer | 9 Minutes (up to 6 times) |
| Helligkeitsregelung | 3 Manual Levels & Automatic Dimmer |
| Nachtlicht | 2-Level Orange Night Light |
| USB-Ladeanschluss | USB-A (Output: 1A) |
| Stromquelle | Netzteil |
| Pufferbatterie | 1 x CR2032 (enthalten) |
| Produktabmessungen (L x B x H) | 8.2 x 3.81 x 6.2 cm (3.23 x 1.5 x 2.44 Zoll) |
| Artikelgewicht | 280 g |
| Material | Acrylnitril-Butadien-Styrol (ABS) |
Garantie und Support
iTOMA products are designed for reliability and performance. For any questions, concerns, or technical support regarding your CKS213 Digital Alarm Clock, please refer to the contact information provided with your purchase or visit the official iTOMA webBitte bewahren Sie Ihren Kaufbeleg für Garantieansprüche auf.