BLNAN 8.7 Inch Wired Motion Sensor LED Ceiling Light

Einführung

This manual provides detailed instructions for the safe installation, operation, and maintenance of your BLNAN 8.7 Inch Wired Motion Sensor LED Ceiling Light. Please read this manual thoroughly before installation and retain it for future reference.

Produkteigenschaften

• Integrierter Bewegungssensor: Built-in PIR infrared motion detector with a 120° detection angle and a range of 10ft (semidiameter).
• Einstellbare Haltezeit: Selectable light-on duration of 30 seconds, 120 seconds, or 180 seconds after motion detection.
• Drei Betriebsarten:
  • Automatikmodus: Light activates when motion is detected in dark conditions.
  • EIN-Modus: Light remains constantly on.
  • G-Modus: Light activates when motion is detected in both daytime and nighttime conditions.
• Drei Farbtemperaturen: Selectable color temperatures of 3000K (Warm White), 4000K (Neutral White), and 5000K (Cool White) via a toggle switch before installation.
• Ultradünnes Design: Niedrigprofile design with a diameter of 8.7 inches and a thickness of 0.99 inches, suitable for various spaces.
• Vielseitige Installation: Can be installed as a flush mount on ceilings or walls.

Figure 1: Illustration of the three operating modes (AUTO, ON, G) and their activation conditions.

Figure 2: Detail of the color temperature toggle switch and motion sensor on the light fixture.

Packungsinhalt

Vergewissern Sie sich vor Beginn der Installation, dass alle Komponenten vorhanden sind:

• 1x Corded Motion Activated Ceiling Light
• 1x Mounting Hardware Package (screws, wire nuts, plastic bracket)
• 1x Bedienungsanleitung (dieses Dokument)

Figure 3: Contents of the BLNAN Motion Sensor LED Ceiling Light package.

Sicherheitshinweise

WARNUNG: Risk of electric shock. Disconnect power at the circuit breaker or fuse box before installation or servicing. Consult a qualified electrician if you are unsure about electrical wiring. Always follow local electrical codes.

• Ensure the power supply is OFF before handling any wiring.
• This fixture is designed for 120V AC power supply.
• Versuchen Sie nicht, die Vorrichtung zu verändern.
• Halten Sie Kinder vom Installationsbereich fern.

Setup und Installation

Befolgen Sie diese Schritte für eine ordnungsgemäße Installation:

1. Vorbereitung für die Installation:
   • Vor Beginn der Arbeiten die Stromzufuhr am Sicherungsautomaten unterbrechen.
   • Before mounting, select your desired color temperature (3000K, 4000K, or 5000K) using the toggle switch located on the back of the fixture.
2. Montagehalterung installieren:
   • Rotate and remove the plastic mounting bracket from the light fixture.
   • Attach the plastic bracket to your existing junction box using the provided screws. The bracket is designed for junction boxes with 2.75"-3.7" apart screw holes.
3. Drahtverbindungen:
   • Connect the wires from the light fixture to your household wiring: Black to Black (Live), White to White (Neutral), and Green to Green/Bare Copper (Ground). Secure connections with wire nuts.
   • Use the hanging rope to temporarily support the fixture during wiring.
4. Montieren Sie die Leuchte:
   • Stecken Sie alle Drähte vorsichtig in die Anschlussdose.
   • Align the light fixture with the installed mounting bracket and rotate it clockwise until it locks securely into place.
5. Strom wiederherstellen: Schalten Sie den Strom am Leistungsschalter wieder ein.

Abbildung 4: Visuelle Anleitung für den Installationsprozess.

Bedienungsanleitung

The light fixture features adjustable settings for operating mode and hold time. These settings are controlled by small switches located near the motion sensor on the fixture's surface.

1. Betriebsart auswählen:
   • Locate the mode switch (labeled AUTO, ON, G).
   • Slide the switch to your desired mode:
   • WAGEN: Motion and light sensor activated. Light turns on only when motion is detected in dark conditions.
   • AUF: Light remains continuously on, regardless of motion or ambient light.
   • G: Motion sensor activated. Light turns on when motion is detected, both during the day and at night.
2. Adjusting Hold Time:
   • Locate the hold time switch (labeled 30S, 120S, 180S).
   • Slide the switch to set how long the light remains on after motion is no longer detected:
   • 30S: 30 Sekunden
   • 120S: 120 Sekunden (2 Minuten)
   • 180S: 180 Sekunden (3 Minuten)

Figure 5: Switches for adjusting hold time and operating modes.

Wartung

Regular maintenance ensures optimal performance and longevity of your LED ceiling light.

• Reinigung: Turn off power before cleaning. Use a soft, dry cloth to wipe the fixture. Do not use abrasive cleaners or solvents, as these may damage the finish or electrical components.
• LED-Lebensdauer: The integrated LED light source has an average lifespan of 30,000 hours and is not user-replaceable.
• Inspektion: Überprüfen Sie die Leuchte regelmäßig auf Beschädigungen oder lose Verbindungen. Sollten Sie Mängel feststellen, schalten Sie die Stromzufuhr ab und wenden Sie sich an einen qualifizierten Elektriker.

Fehlerbehebung

Sollten Sie Probleme mit Ihrer Leuchte haben, beachten Sie bitte die folgenden häufigen Probleme und Lösungen:

Technische Daten

Garantie und Support

For warranty information or technical support, please refer to the contact details provided with your purchase or visit the official BLNAN webBewahren Sie Ihren Kaufbeleg als Kaufnachweis auf.