JEYI I9-Seal

JEYI I9-Seal M.2 NVMe SSD-Gehäuse – Benutzerhandbuch

Model: I9-Seal

Einführung

This manual provides comprehensive instructions for the installation, operation, and maintenance of your JEYI I9-Seal M.2 NVMe SSD Enclosure. This device converts an NVMe M.2 solid-state drive into a portable external storage solution with high-speed USB 3.2 Gen 2 connectivity.

Packungsinhalt

Bitte überprüfen Sie, ob alle unten aufgeführten Artikel in Ihrem Paket enthalten sind:

JEYI M.2 NVMe SSD Enclosure
Wärmeleitpads
Schraubendreher
USB-A-auf-USB-C-Kabel (10 Gbit/s)
USB-C-zu-USB-C-Kabel (10 Gbit/s)
Schlüsselband

JEYI I9-Seal M.2 NVMe SSD Enclosure package contents — Image: Contents of the JEYI I9-Seal M.2 NVMe SSD Enclosure package, showing the enclosure, two cables, thermal pads, a screwdriver, and a lanyard.

Installationsanweisungen

Follow these steps to install your NVMe M.2 SSD into the JEYI I9-Seal enclosure:

Bereiten Sie das Gehäuse vor: Gently slide open the enclosure to reveal the internal PCB.
Wärmeleitpad anbringen: Peel off the protective films from both sides of a thermal pad and carefully place it onto the NVMe SSD chip area. This aids in heat dissipation.
NVMe-SSD einbauen: Align your NVMe M.2 SSD (2280 form factor only) with the M-Key slot on the PCB. Insert the SSD firmly but gently into the slot at an angle.
SSD sichern: Once inserted, gently push down the SSD and secure it with the provided screw using the included screwdriver. Ensure the SSD is flat and securely fastened.
Schließen Sie das Gehäuse: Carefully slide the enclosure cover back into place until it clicks securely.

Explodierte view of JEYI I9-Seal M.2 NVMe SSD Enclosure showing internal components and thermal pad placement — Image: An exploded diagram illustrating the internal structure of the enclosure, including the aluminum alloy case, heat dissipation shell, thermal pad, and screw, demonstrating how to assemble the SSD within the enclosure.

Diagram showing compatibility with M.2 2280 NVMe SSDs only — Image: A visual guide indicating that the enclosure is compatible exclusively with M.2 2280 NVMe SSDs, with other sizes (2230, 2242, 2260) marked as incompatible.

Bedienungsanleitung

Once your NVMe SSD is securely installed, connect the enclosure to your device:

Mit Gerät verbinden: Use either the provided USB-C to USB-C cable or the USB-A to USB-C cable to connect the enclosure to a compatible USB port on your computer, smartphone, tablet, or game console.
Betriebsanzeige: A small LED indicator on the enclosure will illuminate, signifying that the device is powered on and connected.
Disk Recognition: Your operating system (Windows, macOS, Linux, Android, iOS) should automatically detect the new storage device. If it's a new SSD, you may need to initialize and format it through Disk Management (Windows) or Disk Utility (macOS) before use.
Datenübertragung: You can now perform data backup, file transfers, disk upgrades, data recovery, or use it for storage expansion. The enclosure supports USB 3.2 Gen 2 speeds up to 10Gbps.

JEYI I9-Seal M.2 NVMe SSD Enclosure connected to various devices like laptop, smartphone, and tablet — Image: The JEYI I9-Seal enclosure connected to a laptop, smartphone, and tablet, demonstrating its wide compatibility with Windows, Linux, and Mac OS 8.0 and above systems, including Thunderbolt compatibility.

Comparison of USB data transfer speeds, highlighting 10Gbps for USB 3.2 Gen 2 — Image: A graphic illustrating data transfer speeds, showing USB 2.0 at 480Mbps, USB 3.0 (USB 3.2 Gen 1) at 5Gbps, and USB 3.1 (USB 3.2 Gen 2) at 10Gbps, emphasizing the enclosure's high-speed capability for NVMe drives.

Wartung

To ensure optimal performance and longevity of your JEYI I9-Seal enclosure:

Wärmemanagement: Das Aluminium casing and thermal pads are designed for efficient heat dissipation. During prolonged high-speed data transfers, the enclosure may become warm to the touch. This is normal and indicates effective heat transfer from the SSD.
Reinigung: Reinigen Sie die Außenseite des Gehäuses mit einem weichen, trockenen Tuch. Vermeiden Sie die Verwendung von flüssigen Reinigern oder Lösungsmitteln.
Lagerung: Wenn das Gehäuse nicht in Gebrauch ist, lagern Sie es an einem kühlen, trockenen Ort, geschützt vor direkter Sonneneinstrahlung und extremen Temperaturen.
Kabelpflege: Handle the USB cables carefully. Avoid sharp bends or excessive pulling to prevent damage.

Fehlerbehebung

Problem	Mögliche Ursache	Lösung
Gehäuse vom Computer nicht erkannt.	Lose Kabelverbindung. SSD not properly installed. SSD not initialized/formatted. Defekter USB-Anschluss oder defektes Kabel.	Stellen Sie sicher, dass die Kabel fest angeschlossen sind. Re-open enclosure and verify SSD is seated correctly and screwed in. Check Disk Management (Windows) or Disk Utility (macOS) to initialize and format the SSD. Versuchen Sie es mit einem anderen USB-Anschluss oder Kabel.
Langsame Datenübertragungsraten.	An einen langsameren USB-Anschluss angeschlossen (z. B. USB 2.0). Thermal throttling due to high temperature. Leistungsgrenzen von SSDs.	Connect to a USB 3.2 Gen 2 (10Gbps) compatible port. Ensure thermal pads are correctly installed. Allow the enclosure to cool if it becomes excessively hot. Verify your NVMe SSD's rated speed.
Enclosure gets very hot.	Normal operation during heavy data transfer. Ineffective thermal pad contact.	This is expected as the aluminum casing dissipates heat. Ensure thermal pads are correctly positioned and making good contact with the SSD and enclosure.

Technische Daten

Besonderheit	Detail
Modell	I9-Seal
Marke	JEYI
Hardware-Schnittstelle	USB 3.2 Gen 2 (USB-C)
Datenübertragungsrate	Bis zu 10 Gbit/s
Kompatibler SSD-Typ	NVMe M.2 (PCI-E M-Key)
Supported SSD Form Factor	2280 (80mm) only
Maximale Speicherkapazität	4 TB
Chipsatz	JMS583 A3
Merkmale	UASP Support, TRIM Support, Win to Go (WTG) Support
Material	Aluminiumlegierung
Farbe	Silber
Technische Daten	4.06 x 1.02 x 0.39 Zoll (103 x 26 x 10 mm)
Artikelgewicht	0.317 Unzen (9 Gramm)
Kompatible Betriebssysteme	Windows, macOS, Linux, iOS, Android

Diagram of the JMS583 A3 master chip — Image: A detailed illustration of the JMS583 A3 master chip, which is integrated into the enclosure for stable and high-speed data transmission up to 10Gbps.

Garantie und Support

For warranty information or technical support, please refer to the official JEYI website or contact their customer service directly. Details regarding specific warranty periods and support channels are typically provided with your purchase documentation or on the manufacturer's webWebsite.

Hersteller: JEYI

WebWebsite: Visit the JEYI Store on Amazon

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.